⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzread.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@xmen7549

4 жыл бұрын

HI BRO FROM MEXICO MI PROBLEM IS FORD EDGE 2007 SENSOR TEMPWRATURA

@weldingstacks787

3 жыл бұрын

Why are you replacing it

@logandebord392

3 жыл бұрын

Thats the cylender head temp sensor

Good lord. Before you buy anything check how easy or difficult is for common service. Cross this one of the list. Nice video, great description.

Thank you for sharing this information. Nice job on camera work. One of my daughters bought an Edge AWD 2009 with 120K miles and I’m looking at a list of repairs . I just completed 4 wheel bearings/brakes. I replaced front sway bar end links, one was broken, and I’m waiting for shipment of a driveshaft carrier bearing. The fans run all the time so your temp sensor video will serve me well. I’m also considering a stick of dynamite and a long fuse. Semper Fidelis Dave Heitman

Awesome video! You have no idea how much this helped my dad and I change the Engine Temp Sensor on his '07 MKX. Minimal differences but thanks to you, no problem and saved a lot of money. Keep doing your videos and stay safe!

Gracias profe x compartir tus conocimientos 👍.

That thing is a nightmare to get to, time to get something with an engine that has a more simple design. That ford 3.5 is a hand grenade.

Great video . helped a lot. Only have to replace that wire and fuel injector wire that rats chewed up. Thank You !

My over temp coolant light just came on on my 2011 exploder! NOPE!, Selling it for sure! Had to do spark plugs a while back what a POS! Soon my Add will read: 2011 Explorer for sale $2,500 under going price!! Mechanics special only needs a coolant temp sensor!! Bargain days are here! Never again, so unbelievable. This is also my second engine, lost my first well maintained never abused engine from a simple water pump seal going out. Genius engineers at Ford decided it was a great idea to locate the water pump inside the timing chain cover! Yup that cover that is full of motor oil. By the time you get off the highway after hearing all the noises it’s over. That was fun! Seriously unreal, 100 plus years of automotive experience in building engines and we are here!

@adaywithastrud

2 жыл бұрын

Right? I was thinking, geez, why don't we just rebuilt the motor while we're at it. Good lord!

Thanks for this man 👍🏻helped me a lot with my dad's edge.👌

@carlostamariz5365

2 ай бұрын

What was the edge doing?

Thanks! Great video, liked and subscribed.

You guys help me a lot I have a Ford edge

Thanks guys for your super informative videos. Does 2009 Ford Flex has both "Coolant Temperature Sensor" and "Cylinder Head Temperature Sensor" or only one of them doing oth functions? Many thanks

27:09 if you know what your doing and looking for simple location. Thanks.

@paulmassey1089

3 жыл бұрын

This should be the top comment!

Great video and well explained

hi to do this we have to remove the fuel injectors? or just unpluged and pull them out?

Hello, I enjoyed watching your video> I have changed the Coolant Temperature sensor the radiator fans and still the fans won't turn on to avoid it from overheating. What ells should I do?

Hello sir nice 👍 please kindly from where you buy the coveralls you wear it and you’re friend really nice

Hello. I see that the Ford Duratec 35 engine you know very well. I watch your videos. They are very helpful. I have a question. What could be the reason that my mazda cx 9 3.7 does not start in 1 time. After an overnight stop, the engine starts and goes out. The car starts the second or third time. When the car is driven, it fires in 1 time. Battery and starter working. What could be the problem. Please help.

Merci mon Ami, cetait difficile a decouvrir. Thank you .

Thank you

Hi. Will I find the ECT sensor of a Ford Explorer 2014, 3.5L, V6 engine on the same location and will I need to do the same procedure? Thanks in advance.

The one of a ford fusion 2014 1.5 has the same location of the temperature sensor?

Saludos y felicidades por su canal es excelente, amigo requiero de su apoyo para saber las medidas de los tornillos del múltiple de admisión sería de mucha ayuda si me apoyará un saludo

Hi Thank you for this great video . I have a question . What where the symptoms that made you change the temperature sensor . Is this sensor responsible of sending the signal to start the high speed fans?

@slicksnewonenow

3 жыл бұрын

@Marc S Hiya Marc- That sensor HAS TO BE part of the "chain"... I replaced the fans and module, the thermo, you name it. Last year I had to pay someone to do the stupid internal water pump, I certainly didn't want to bother with it. I'm almost positive... It's GOT to have something to do with that Temperature sensor. If not, I'm thinking about buying five gallons of gas and a book of matches. That'll fix this boat anchor.

@tonyorob

2 жыл бұрын

@@slicksnewonenow Was the issue triggering a P0420 code?

@Jasonthehammer

2 жыл бұрын

P1299 code

@YrbFamily107

Жыл бұрын

@@tonyorob mind is can you give me some insight?

@Omardottcom

Жыл бұрын

Where you able to figure it out? My fans do not come on. I replaced the fans after checking the fuse and finding out it was fine. There’s power going to the new fans at the controller, but the don’t turn on. I can put power to the fans directly from the battery and they turn on. Now I understand if the radiator cooling fan doesn’t turn on if the coolant sensors is bad, but I don’t understand why the A/C wouldn’t turn when the A/C is turned on. Any help would be appreciated.

Thank you so much

Are these sensors frequently broken on these Ford V6s? Are there better aftermarket parts, or updated OEM parts?

@gilligan369

3 жыл бұрын

Yes.

When did you pull the fuel injectors and fuel rail?

Question??? Do you know the part number for the wiring harness that connects to that temp sensor???

Pls help I have 2012 Ford Edge one day it work and everything works great but when I turn it off it will stay couple days without cranking or starting at all I changed the PCM and fuse box worked for one day and it won’t back to the same issue

if i have a faulty temp sensor will the scanner pick it up ?

Greetings Auto Repair Guys; I have a question and I hope that you can help me : I have a (2008 Ford Edge SE) and I need to replace that same sensor... * Q : Is There A 2008 Ford Edge SE (Ford Vehicle Parts #; Replacement Parts #) Or (Another Generic Name) for This "Coolant Temperature Sensor" ..? I called a couple of auto parts stores and they gave me a different name other than a "Coolant Temperature Sensor" with a price between $200 to $300 for the sensor... So, I think that maybe I'm searching with the wrong name for this sensor... PLEASE HELP ME..!

My 2009 MKZ cooling fan runs at high speed when the car is cold. But only when the climate control system is on. When it is off the fan doesn't run. Would this temp sensor cause that issue it is it the cooling fan control module?

@medic6031

2 жыл бұрын

I have the same problem. What did you find to be the problem?

@edwardgray1532

2 жыл бұрын

@@medic6031 Fan control unit. East to replace.

where is the cylinder head temp sensor on a 2013 fusion 2.5L? plz help

Love the gold watch

Pretty painful to replace a sensor. Thanks Joe

That was good

My fan do not stop after engine its off I have to disconect from the module others wise will drain the battery no engine light or error code on scanner ?????,,

Hi. Did you also replace the temperature sensor wiring harness that was chewed through by rats? Part number 8T4Z-14A411-A. Cost is $10 and you don't have to pull all that stuff off. I was able to sneak my new wire in.

@jhartmac100

3 жыл бұрын

U just needed a wire or a new sensor?

@jamesmccrory5774

3 жыл бұрын

@@jhartmac100 I just had to replace the wiring. If you jump to the 28 minute mark, their temp sensor wiring has also been chewed on by a rodent.

Gosh I wonder how you felt doing all that work to find out that is the cylinder head temp sensor 😂😂

@kirkleaman6863

4 жыл бұрын

We’re is the coolent temp sensor on a 2007 Ford Edge ?

@thesally125

4 жыл бұрын

Kirk Leaman it’s to the left of the cylinder head temp sensor.

@BigRichieVideos

2 жыл бұрын

Where would the coolant temp sensor be on a 2009 Lincoln MKS?

@turkey8705

Жыл бұрын

Where is the coolant temp sensor on a 2008 Lincoln MKZ? This video shows the cylinder head temp sensor, I need the Coolant Temp Sensor... Thanks in advance

What were the symptoms?

does the temperature control senor control the fans when to turn on and off?

@sabinosalazar9969

4 жыл бұрын

I need the answer to this

@MY-pj8cd

3 жыл бұрын

Yes it does, it signals the computer to turn on the fan

@mapquestHs

2 жыл бұрын

Yes my fans come on when the engine is stone cold because of my faulty sensor.

What's the part num. on this sensor?? Any help!!

Hi there anyone know COOLANT TEMPERATURE SENSOR LOCATION for 2015 ford transit 350 xlt ??????

Where is the temperature sensor on a 2009 ford ranger 2.5 xlt

Hey guys I have a question I have a 2011 Lincoln MKX . the radiator fan is constantly staying on the high fan stays on whether the engine is on or off and I'm not getting any check engine light so I'm not exactly sure what's going on if it's a bad relay or Temperature censor . can you guys point me in the right direction

@dannyfranklin434

2 жыл бұрын

I’m having Same problem on same year make model as your did you figure out any fix?

@kylehamilton7205

2 жыл бұрын

@@dannyfranklin434 no I think I'm just going to wire it in to a switch and use the fan when I need to

My Lincoln 2014 MKZ you think is in the same place as sensor temperature sensor please can you respond me help me??

@tiffany2806

Жыл бұрын

Should be they seem to be the same

You dont have to remove the intake manifold to get to this sensor, you can access it from the passenger side it's a little tricky, but ten times faster than removing intake, and you dont have to replace any gaskets.

@taylorfullmer4135

Жыл бұрын

What kind of tools did u use I can see the sensor just trying to figure out the right stuff to do the job cus I really don't wanna take everything off

@nipsey3221

Жыл бұрын

Thank you ! I removed it on the side didn’t remove all this !

@gunlover1955

Жыл бұрын

19mm Metric Flex-Head Ratchet Wrench,Box End Head 72-Tooth Ratcheting Combination Wrench Spanner

@ericengland5158

Жыл бұрын

​@@gunlover1955 how tricky is it to get back in if done this way?

@m00dmvzik

Жыл бұрын

​@cuteears22 bro how? I can barely fit my hand there.

is this the same for 2013 Ford Explorer?

@geog1388

3 ай бұрын

this is the same setup , a total nightmare.Ford should apologize for ths crappy design.I gave up and let the garage man do it.I will never buy another FORD PRODUCT AGAIN .

Hi can I know how you know that you need to replace it?

@weldingstacks787

3 жыл бұрын

Exactly

@adaywithastrud

2 жыл бұрын

The wrench light will come on.

Same engine 11 cx9....damn ford

I'm have ford flex 2009 is the same

Hola este video es del for edga 2011 el senso del motoe

What was the cost of this repair

Has this guy ever respond back to you guys????

Where’s the second part of this video? The instructions on how to install it?

How much do people charge for a job like this?

@jhartmac100

3 жыл бұрын

700

@lajohndachisolm2724

3 жыл бұрын

Wowwww that’s to much

2007 Lincoln MKX fans not working. Have checked every thing. New Temp Sensor, New Fan assembly, New Thermostat, fuses good, checked continuity and still not working. Not even when the ac is on. I'm lost.

@jhartmac100

3 жыл бұрын

@paulbrown357 exactly he has a bad computer module or ECM not worth replacing

@Omardottcom

Жыл бұрын

Where you able to figure it out? My fans do not come on. I replaced the fans after checking the fuse and finding out it was fine. There’s power going to the new fans at the controller, but the don’t turn on. I can put power to the fans directly from the battery and they turn on. Now I understand if the radiator cooling fan doesn’t turn on if the coolant sensors is bad, but I don’t understand why the A/C wouldn’t turn when the A/C is turned on. Any help would be appreciated.

@tiffany2806

Жыл бұрын

Did you ever get it figured out? I was thinking you need to do a master reset? Or maybe the fan module? I'm on my 3rd fan module 2 set of thermostats 3rd fan and now I'm looking at the sensor and comment replacement😓

@eduardosoto9703

10 ай бұрын

@@Omardottcom pudiste resolverlo? Ayudaas!

@zeusb.8659

8 күн бұрын

​@@Omardottcom did you ever figure out the problem I'm having same exact problem I know it's been a year since you commented.

My car is a MKT Ford Lincoln and the fan would not turn off and it drained our battery

Alot of work for such a small device. Might have to drop this problem in a mechanics lap.

@tim9170

2 ай бұрын

I've done it to put in a brake booster its not that hard the mechanic will charge you too much

Sub español porfaa

Hello, I have a 2007 edge that’s started to overheat! I replaced the thermostat,but didn’t fix the problem. I am thinking next to check the radiator on this thing. Does anyone knows if this sensor going bad could cause overheating problems? I will appreciate any info as soon as possible thanks.

@33elmore

3 жыл бұрын

@al carr, thanks a lot for the info. I actually was able to fix my problem without having to mess with any sensor. I did a radiador flush, disconnected and clean all the hoses and that seemed to solve my overheating problem.

@cbkproduccionesaudiovisual9410

2 жыл бұрын

@@33elmore Gracias por la información, yo tengo el mismo problema, justamente le pedí al mecánico que hiciera eso, les comento mas adelante que tal me fue con el problema. Saludos desde Guatemala.

@rodrigodarcknes7859

2 жыл бұрын

El de Guatemala soluciónaste el problema ??

@cbkproduccionesaudiovisual9410

2 жыл бұрын

@@rodrigodarcknes7859 Gracias por estar al pendiente, NO se solucionó el problema, mi mecánico me recomendó cambiar el modulo del ventilador, voy a probar con eso, les comento que tal nos va...

@rodrigodarcknes7859

2 жыл бұрын

El de Guatemala si cambiaron el sensor de temperatura y nada lo más seguro que con el módulo quede ya que en tu primer comentario dijiste que checaron cableado y todo así que no tienes un corto

I'll be honest and say that this MAZDA engine will be added to my list of "World's Best Boat Anchors", along with every other Fraud Motor Company product produced since the year 2000. In fact, the Flux that we unfortunately own is such a P.O.S., I've sworn off of ANY vehicle built post-1985. I'd rather rebuild 40 year old "junk" over and over again, for $2,500 instead of throwing away $1,500 EVERY TIME something goes wrong with this Flux... I call it that, because there's really no Flex at all to it. ABSOLUTE JUNK.

This the same for the ford fusion?

@mateusbianchi6030

3 ай бұрын

Discovered?

@mateusbianchi6030

3 ай бұрын

Did you get an answer? Which model is your fusion?

Where is the coolant sensor

The video is shows you how to do it

Long story short DON'T BUY A FORD ???? I would drill a hole in the block and tread tap it and install a coolant temp sensor and cut and run new wires to it OR put a tog go switch on the Fan and watch the gauge

U forgot a step on how to remove the gas line

Why wear a fire suit, a watch, and a ring ?

@verngoossen3628

4 жыл бұрын

dout cut my finger off wearing a ring doing macnic work-------

This is not the coolant temp sensor

@dontrompas1312

4 жыл бұрын

Is it the cylinder head temp sensor? Is it different to coolant temp sensor?

@thesally125

4 жыл бұрын

V Hernandez The cylinder head is similar in purpose to the coolant temperature sensor, however, it is more accurate due to the construction and operation of the sensor.

Why Ford?

Time 18:35 Didnt show how to remove gas chamber.

Vaya manera de buscar que solo los de la agencia Ford puedan o deban hacer estos trabajos, más mientras haya inteligencia, inventiva, no acudiremos a las agencias, donde los costos están por las nubes, y arriesgando a qué roben piezas

Save your ring and watch

That is FORD

No technician should have to go through all that just to drain coolant from the radiator

You did a great video to explain this, but I must say, what a load of horseshit engineering from Ford/Mazda for a job that usually takes little time for the average car, if they had a threaded port on the outside head or near the thermostat. Ridiculous to have to tear a motor apart for what could have been a simple job. Engineers are book smart and common sense stupid. I have to soon do this on a 3.7 Mazda 6. Looks very similar design.

tear the car apart just 4 a sensor? too much

So pretty much have to take the whole top of that booger apart to get to the sensor? Good grief !

@timetryp422

Жыл бұрын

Bad engineering!

@tiffany2806

Жыл бұрын

And the water pump is INSIDE THE ENGINE and don't even get me started on trying to change the serp belt 😒😒😒

This is bullshit why do would the manufacturer put this sensor in a fucked up spot 🤦‍♂️

Oh geezuz,…. What a pain in the @$$. 🤦🏾‍♂️

Nothing like everything being made out of plastic - such as plastic fastener clips - and - as in this video - plastic breaks after just short amount of weather degradation - makes the manufacture more $$$$ for cheap plastic now being used on upward of 30 -40-50% of new automobiles 🤨😡

That is the dumbest place for a sensor

Ouuff myr

You removed a whole section on the fuel rail you might as well have done nothing.