⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzread.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

Don’t disconnect the hose you don’t need to. Just unbolt the aluminum housing connecting elbow that’s attached to the hose

You guys have a video on everything I need on my mkx, I highly appreciate this Chanel. Love you guys!

Planning to do This tomorrow...will Let. Everyone Know if This video helped at all. ! I would also appreciate seeing the job get completed But from what I saw this seems very thorough and it should be everything I need to know thanks a bunch for your time!

@lowhertzhighspl

2 жыл бұрын

@Christian Long lol

Thank you!! It helped greatly, especially about not disconnecting the fuel line :)

Really appreciate all your videos! They are all very helpful.

I appreciate your videos but if you would follow through with the completion of the job that would be more helpful.

Thanks guys for making this how to vid.

I bought my daughter one of these Ford Edge cars. You Guy's videos are great, because these cars are not. And they really suck to work on. So thanks Repair Guys!!!

Thank You for posting. now.

Saludos agradezco tus vídeos Una pregunta Mira yo tengo un Lincoln mkx 07 3.5 mi pregunta es El termostato de mi coche a que temperatura abre?? Gracias!!

Did the replacement seal you linked in the description actually work? I don't know why the old seal and new seal look completely different.

Thanks....!!

What it’s hose called that runs under the housing, under the intake, and back to the reservoir? I can’t find a replacement and am doing a whole housing replacement. Thank you

Would this work on 2013 3.7 ?

What torque Spec. On the housing bolts?

What size allen wrench to loosen the drain plug?

@tk543

2 жыл бұрын

@4:12 He says 19MM

I have Lincoln MKX my car is blowing cool air then it gets hot when I drive , then cool again when I stop. Then today I left car running got back in a sounded like a fan was on and my temp gauge was over half...is this a thermostat problem ?

@tonypatzhox4466

3 жыл бұрын

not enough coolant

@BigGritter210

2 ай бұрын

My car is doing the same thing, was it your thermostat?

Awesome video...how much would a mechanic cost for thermostat replacement?

@tk543

2 жыл бұрын

$421

What size allen wrench loosens drain ug?

@eddielozano3419

2 жыл бұрын

19 wrench

👏👏✨

The bolt for the bottom half of the air filter is a pain😅

Ok that accent is hilarious lol.

Didn't get anything out of video

I just wanted to no how long to change the thermostat

Why can't I just drain the coolant from the top thermostat housing and hoses instead of going down at the bottom and draining all the coolant out

@franhecha

5 жыл бұрын

It is because you could not remove all the coolant from the engine, and this would cause that when removing the thermostat much liquid will fall to the ground.

@gertis7420

3 жыл бұрын

That's what I usually do, just let the coolant drain from the thermostat hose. Put a container under vehicle to catch most of the coolant.

@earlwells894

2 жыл бұрын

i would just take the hose and mount bolts of housing off and replace it

Yall video does take to long to get to the point we don't want to hear or see how long a bolt is get to the point damm

Sounds like your talking underwater.