It’s working perfectly I have 60litr tank this is suitable for that tank

@madebykm

2 ай бұрын

Great 👍

@Hunter47974

Ай бұрын

And what is the unit consumed in a single month

Im actualy really impressed by how well built this is.

thank you for describing the automatic cooling shutdown concept, that was the most important part of cooling

amazing! I am doing this

You are amazing! Never thought you would go this far to make a chiller! Thanks Buddy keep uploading I wait for your videos always! :)

@madebykm

Жыл бұрын

Thanks, will do!

@syedaltamish2338

Жыл бұрын

bro i cannot find 200mmx100mm alumunium heat sink anywhere. should i use 2 100mm alumunium heat sinks? but how should i attach them together???? i have some white silicon thermal compound which is used for LEDs.

@madebykm

Жыл бұрын

Yes you can use 2 100mm heat sinks and attach them using nuts & bolts and two small pieces of 4mm acrylic sheet from the sides. You can also use a 12 inch x 100mm (minimum) heat sink. The cooling procedure will work better if you use a larger heat sink. You can also search the markets where electronic products and LED lights are sold.

Superb video brother. have been thinking of the cooling solution for summers and just got the right procedure.

Awesome

Upgrade: you can use 2 Peltier pads, one on top of the other, one with 12v and the other with 6v, the 12v pad will cool the hot side of the 6v pads and thus increase the cooling capacity

@malhaar5880

Күн бұрын

Someone didn't read thermodynamics properly

This man deserve more subscribers...thank brother for sharing your talent...❤

You are doing great brother 🙏🏻 keep up the good work ❤

@madebykm

Жыл бұрын

Thanks

Amazing , never seen before👌

@madebykm

Жыл бұрын

😊 Thanks

Would it be possible to hook this up to a immersion coil cooler, I'm planning on using this for brewing beer,

Thank you in advance. Regards.

@madebykm

10 ай бұрын

Always welcome

You are making the hobby affordable to everybody.. Thanks for this kind of great ideas...

@madebykm

Жыл бұрын

My pleasure 😊

Excellent idea! ❤❤

@madebykm

Жыл бұрын

Thank you! 😊

Great work. Your are diy king for aqurium.

@madebykm

Жыл бұрын

Thanks

Great Job! Do you know which is the lower temperature that this device could reach? I'm trying to do something similar for my cats' fountain, so they can drink fresh water in summer, but my aluminium cooler is very small in comparison. Regards!

Brother this one is unexpected you are amazing 👍

@madebykm

Жыл бұрын

Thanks ✌️

amazing, do you sell it?

how many watts per hour for the use of the tool completed peltier, and fan etc?

This is something next level thing

@madebykm

Жыл бұрын

Thanks 😊

Greattttttt Job....! I have a suggestion :) Please voice over in your videos, as you can give detailed information about everything

Your ideas are beyond imagination

@madebykm

Жыл бұрын

Thank you

Good job 👍

@madebykm

Жыл бұрын

Thanks 👍

Thought of connecting this to the outflow hose of your filter so that the filtered and cleaner water will pass through the chiller instead.

Hi sir, can I used power supply 12 here ?

Great work bro..👍👍👍

@madebykm

Жыл бұрын

Thanks

Really good one....

@madebykm

Жыл бұрын

Thanks a lot 😊

i have question, at home i have peltier 12704 which can run in 4a and 12v 5a adaptor, if i want the same build like you it is possible ?

Good job 👌👌

@madebykm

Жыл бұрын

Thanks 😊

Legend video ❤

@madebykm

Жыл бұрын

Thanks 😊

Getting to see your 1 by one 😊

@madebykm

10 ай бұрын

👍

Bahot badhiya sir.,.......I like.kya may ye purchase kar sakata hoo kya.kya price padega.batana

After so many days ❤️

@madebykm

Жыл бұрын

😊👍

is this circuit a series circuit or a parallel circuit?

Innovative

@madebykm

Жыл бұрын

Thanks

can this work for a 50 gallon tank?

Great 😃

@madebykm

Жыл бұрын

Thanks

Hi bro. Awesome ❤ can I get one please ? Thanks 😊

Sir can we make canister filter and chiller together...inlet from aquarium will go to canister filter and outlet from canister filter to chiller inlet and then outlet from chiller to back in aquarium again,will I have to use 2 diffrent submersible pump with the same volt 800/L? And can we cut and extend the temperature sensor wire because I am planning to hide diy canister filter and chiller under the tank cabin

and does it automatically turn off when the temperature is 25* Celsius

I think this is one of the best DIY ideas for planted tank. Great work, bro! Hats off to you. 👏👏👏

@madebykm

Жыл бұрын

Thanks 😊

Hi, exactly what i was looking for this summer, music was good but your comentry would have been more helpful. I will try to make 1 and will trouble you if needed. Thank you. Keep doing gr8 work

@madebykm

Жыл бұрын

👍

How many peltier pads needed for 120L aquarium

How many peltier need to make 24° of 70 litter tank?

Hi! Cool project! Just one question here. The fan direction is right? In that way that you show in the video was exhausting hot air instead of cooling the hot side of peltier (and the heatsink) . What's better?

@roberth3793

Ай бұрын

You would usually exhaust it away from the peltier

How many watts does this device use?

you have made the life easy....please let me know if this also warm the water....I mean this is chiller and warmer both

@madebykm

7 ай бұрын

It only cools the aquarium water. Thank you.

Is the size of the pipe 8mm ?

Can you explain why this chiller cannot be used for saltwater?

Great job brother..!! Will the same setup work for 75lit water capacity tank ? Or should I increase the size of heat sink, number of modules

@madebykm

8 ай бұрын

Yes, you will need to increase the size of the heat sink, the number of Peltier modules, etc. Please check the description for further information. Thanks.

Hi, I find your work very good and useful, I want to ask can I use the 12v 10a adapter because I tried connecting the wire to the female jack but I don't understand why only the temperature measurement circuit is displayed and the other parts then it doesn't work sorry I'm not an expert in the field, hope you reply soon. Appreciate what you are doing. Thanks

@madebykm

11 ай бұрын

Yes, you can use a 12v 10a adapter

I Think it costs approx ₹3k which is very affordable as compare to Redimate chillers👍💯👌 And KM sir you are really great❤

@madebykm

3 ай бұрын

It cost me around 2500 rupees to make it. Thanks 🙏

ใช้กับตู้ 24“ ได้ไหม

Olá sou aqui do brasil e gostei muito do seu projeto e vou fazer com 3 pastilhas porem tenho uma dúvida o dissipador para 3 pastilhas tem que ter 300mm X 300mm? Pois estou com dificuldade de encontrar com esse tamanho o maior que eu encontrei foi 104mm X 300mm. Posso emendar?

@luanhonatel2275

4 ай бұрын

Resolveu?

Hello brother , great job , can you make one for me , i am not an electronic person , wont be able to make it .. i can help you with spares to build please brother 🙏

Wow super I'm so many times to try this method...but failure only happened....I try this method thank you

@madebykm

Жыл бұрын

👍

Great video very detailed on how to build. Why did you a a heat sink on top of the water tank? I am talking about the opposite side of the peptide cell of the tank.

@madebykm

11 ай бұрын

The smaller heat sink was installed to enhance the cooling and to attach the Peltier module and water block to the bigger heat sink.

@madebykm

11 ай бұрын

Thanks 👍

@user-kj9wb4iq6p

11 ай бұрын

@@madebykm Why would it enhance the cooling though? That is the cold side so won't that heat sink be stealing cold?

Hi, I saw your video on the diy soil. I was wondering if I can cap it with aqua soil instead of sand or gravel (I have used aquasoil at home). I will make a jungle theme planted tank with only jungle val and dwarf sag. So will I add some root tabs under the soil as well? Also should I add a layer of fine mesh between the soil and aqua soil layer? Finally, how should I fertilise these plants? Since they are root feeders, I’ll need root tabs and the problem is that I will be making a carpet of dwarf sage and jungle val, so how should I add the root tabs? Will low light be enough? And should I use co2? I have some diy co2 available, will using that hurt?

@madebykm

Жыл бұрын

Yes, you can cap it with aqua-soil. There is no need to place a mesh between the two layers. Also, no need to add root tabs now, after a month or two you can add them using a tweezer. There will be no problem. They are easy-to-grow plants and can be grown in low light and without CO2 injection.

Dada ami ei rokom akta chiller banate chai 50 litter er tank er jonno Amar monthly ki rokom current bill aste pare

Hi, can i use the 12v 6a adapter instead of the powet supply?

@madebykm

Ай бұрын

At least a 10-amp power supply or adapter is required to run all the components.

@leducphu2310

Ай бұрын

@@madebykmmany thanks

@madebykm

Ай бұрын

👍

Hi Bro! Does the concept works for 300ltrs planted aquascape?

@madebykm

Ай бұрын

Please check description

Why is there a heat sink on the cold side of the Peltier cell?

Can we use a copper cooling block with the same heat sink ? I assume the time to cool will be faster . Also, what’s the total current draw of the unit ? Can this be plugged safely into a standard 6A socket ? Or need a 15A socket ?

@revverendr6521

18 күн бұрын

Never mind got the answer. Max current draw will be around 10A for this setup, so 15A socket it is. As for the copper cooling block, while it is more efficient, copper is harmful for fish and shrimp

Super Idea. Brother when u make it for a 20 gallon tank u have mentioned to use a 12 V 20 Amp SMPS. So when we put both the peltier modules together it should be connected to 20 Amp output or when both the peltier module and both the cpu fans to be wired in parallel together and then hooked on to tge 20 Amp output ?

@madebykm

11 ай бұрын

Yes, first connect all positive wires (usually red) of the Peltier modules and fans and connect to the positive terminal (+) of the SMPS, and negative wires (usually black) to the negative terminal (-). Thank you.

Hello Bro, thank you so much for the video. I have gone through the description and I am having a 120 litre tank. For this if I just increase and stack 2 or 3 peltiers together will that be enough ? or I need to increase the heat sink and the fans as well?. Kindly let me know. Thanks 🙏

@madebykm

9 ай бұрын

Yes, you’ll need a much larger heatsink and more cooling fans in order to maximize the cooling of the hot side of Peltier modules. The cooler the hot side of the Peltier is kept, the better the device will be able to cool the aquarium water. Additionally, you’ll need a thermostat capable of handling the Load of your Peltiers, cooling fans, etc. Thanks.

@dineshj8055

9 ай бұрын

@@madebykm thanks for your reply 🙏

@nijad6257

4 ай бұрын

​@@madebykmhow much will it cost build something likethis for a 200 lt tank

Hi KM, Thanks for your video. I have made same stuff ordering same spares given in discription. However 12V DC pump is unable to pull off water rest all mechanism working fine. Can u guide/ help me on water pump part. Thanks

@madebykm

Жыл бұрын

Of course, check the description box for the solution. Thank you.

@abhishekchalkar8228

Жыл бұрын

Thanks KM, I have followed the steps and working perfectly ❤

@madebykm

Жыл бұрын

That’s great 👍

Can you use any digital thermostat for this project other than what is on the video? Like for example, W3230 model?

@madebykm

10 ай бұрын

Yes, you can

@AndroidJeek

10 ай бұрын

@@madebykm Thank you! Also isn't this aluminum water cooling block prone to corrosion when exposed to water?

@madebykm

10 ай бұрын

The cooling block I used is made of high-quality aluminum alloy, so there will be no problem in a freshwater aquarium, but do not use it in a saltwater tank.

How many liters is your tank

I've 400 lt. fish only Marine aquarium. Please suggest for suitable cooling mechanism

@user-fq8kt7bv2t

Ай бұрын

Аквариумный холодильник

Great! Why it can't be used for marine setups ?

@jegathusingh

Ай бұрын

You can but there’s a chance that the pipes may clog with salt deposits

What is the room temperature?

will the aluminium cooling block have any effect on the fishes and can the outlet of the cooler module created here be modified to fit inside the filter to help in much more effective cooling ?

@madebykm

Жыл бұрын

1. I have not yet noticed any negative impacts on my fish. 2. It’s working well in this setup, but you can always modify it as per your choice.

Hey mate, i have x2 peltier modules (288watts each) that i want to interlink, that is one module feed the second giving a total of 576 watts plus pump and 2 fans. What thermostat controller do i need?

@madebykm

8 ай бұрын

You need to use a thermostat like this - amzn.to/454tL7h

this was awesome,,do you even try to use solar in peltier cooler?

@madebykm

Жыл бұрын

No, I didn’t. Thank you.

@MGEMLAQUATICS

Жыл бұрын

thank you for response sir..hope to see some works like that coz i need it to my saltwater tank😅

Is the thermoelectric cooler automated and dependent on the temperature sensor? If not, how do you make sure that the water temp doesn't drop too much?

@thanhthuannguyen6794

4 ай бұрын

You wire it to a temperature control switch.

Very useful. Just one question, for 75G tank only the no. of peltier modules to be increased? Can you please tell me how many to be used for that?

@madebykm

Жыл бұрын

Please check Description for details, thanks.

That’s awesome. Any chance it’s suitable for salt water?

@madebykm

Жыл бұрын

Thank you. I think the pump and aluminum water block are not suitable for salt water.

Useful video tnk u bro 3 feet 180 litre tank How much perlite do need?

@madebykm

Жыл бұрын

Please check the description, I have given the details there. Thank you.

Which thermoelectric peltier module should I use for a one feet cube aquarium ?

@madebykm

Жыл бұрын

TEC1-12706

@arthur1984

Жыл бұрын

@@madebykm Thankyou .

what is the lowest temperature this can reach?

what volts should be used to operate the tec peltier module sir?

@madebykm

Жыл бұрын

12v for TEC1-12706

This is amazing! My only concern is if it will work if I need to reach 15 -18 Celsius on my tank when my ambient temperature can be 35 Celsius, do you think it’s possible?

@madebykm

11 ай бұрын

To reach that temperature, you need to use 2-3 Peltier modules. Please check the description box for more information. Thanks.

Thanks. How long does it take to cool? Tank size?

@madebykm

10 ай бұрын

Please check description.

Is it possible to record the temperature changes over time?

@madebykm

Ай бұрын

No

Cam you make seperate video for saltwater tank chiller? Hope you see this. Thanks in advance 😇

@madebykm

11 ай бұрын

You can use the device in a salt water tank if you use a titanium water block and a pump that can operate in salt water. The process of making the chiller is the same.

This type chiller is suitable for 6 feet aquarium?

@madebykm

5 ай бұрын

Please check description

Hi, thank you for the tutorial but it’s not working for me, I’ve got a 12 cm block with 2 pettier cells 12V 6A serial conected, mini pump with a tap on the outlet to reduce even more the volum and the water doesn’t flow cooler than the tank, big heat sink with big fan on the hot side and nothing. Tested with my fingers and the cold side works fine but the water doesn’t goes out colder. Any idea why is not working? All connections as your video…

@madebykm

10 ай бұрын

The heat sink you’re using is not big enough for 2 Peltier modules. You need to use a bigger heat sink and 2 cooling fans. Check description for more info. Thanks.

how loud is this unit. I a planning on making a DIY mattress topper cooling system?

@madebykm

10 ай бұрын

The device doesn't make a lot of noise. All you can hear is a gentle hum from the cooling fan.

@levan634

10 ай бұрын

@@madebykm awesome, thanks mate!

@madebykm

10 ай бұрын

👍

can i use it without the grey thermal paste?

@madebykm

6 ай бұрын

No, thermal paste is necessary

Can i add another 6 a cooling module(1+1) to 12 v 10a supply will it able to handle that? If that which power supply would be sufficient?

@madebykm

4 ай бұрын

Check description for details

@joyrichard8581

4 ай бұрын

Got it thanks

Dada tomar kaj sotti ashadharon . I have two queries :- 1. What is the total power / wattage of the system? 2. Can this be also used as heater by the adjusting the temperature controller?

@madebykm

Жыл бұрын

1. 77w, 2. Yes, by adjusting the Peltier module and the temperature controller. Thanks.

Can you tell us where you get all your componets for the DIY Peltier Water Cooler or the brand and name of component you are using?

@madebykm

Жыл бұрын

From Chandni Market, Kolkata. These are also available online, please check Description.

honestly bolchi dada tomer video gulo ato details a valo re bojhano thake.... dekhle neshai pore jete icchde kore

@madebykm

Жыл бұрын

😊👍

We're will I get this stuff from and how much will it cost as I have an axolotl and buying a cooler cost £300

@madebykm

11 ай бұрын

Check description

@solo-uq7up

11 ай бұрын

@@madebykm ok thank you will do

What's the power consumption? Oh and tkx for the video. :D

@madebykm

9 ай бұрын

The total wattage of the device is 77w, thanks.

Dada 4mm acrylic sheet kolkatar kn jygy pbo r kto daam

@madebykm

3 ай бұрын

Jara glass, mirror etc sell kore tader kache available thake. Echara Ezra street e paoa jay.

berapa watt yang dibutuhkan untuk alat ini

Can I use a water block to cool the hot side of the peltier ?

@madebykm

Ай бұрын

Yes you can

@Hunter47974

Ай бұрын

Can you let me know how much unit it consume in a month and the duration of usage in a day

Can I use 12V 5A power supply with these components?

@madebykm

Жыл бұрын

5A is not enough to run the Peltier, pump and fan.