“That’s not the 6 inches I had hoped for.” That’s what she said! 🤣🤣🤣

This is the system I want - manual crank lift.

Hi. So I’ve watched about a million trailer to camper conversion videos and a bunch of bed lift videos. You might not be the best mechanic but your bed lift works great and you did it all yourself, well done buddy! What I really want to thank you for is putting all the links for the hardware in the description. So, THANK YOU! Have fun on all your adventures! 👍🏼☮️

You may want to drill holes in the plywood base to allow air flow on the underside of the mattress to prevent mold.

@dmwi1549

2 жыл бұрын

Hopes or I bought stuff from sailing supplier that resembles artificial turf with breathable membrane which is supposed to allow it to breath. Holes are cheaper.

@susanbeals7597

6 ай бұрын

He can accomplish that by laying 1"x4" slats under the mattress, spaced a couple of inches apart.

Thank you for sharing your work with us and in such a calm manner. Those of us who are losing mobility appreciated it.

Great simple design, gives people a lot to work with to suit their needs , Well Done !👍😎

This is exactly what I've been looking for! Thanks for making this!

Thank you for sharing your thoughts and results. I also got inspiration from your work. Best wishes to you and your loved ones.

This is great! I've seen so many but this is the first one where all the pulley work it tucked under the bed:)

That's some straight up dungeon master skills. Nice job.

I like the cable idea. Seems more robust that the straps I've seen in other designs. The wall runners are also neat.

Love the clean look of those crimped cables. I also like that there are no nuts to come loose as you drive down the road.

Ooh... thank you for this video. Ive been screening everything to try and figure out a nonelectric bed lift and your video reminded me of a theatre traveller curtain track. Now i know the direction to go.

Cool! I did something similar in my bus using 4 pneumatic cylinders. I'm actually sitting at my desk under it at the moment :). But I had to go through a lot of hoops to make that go and down up evenly - one way valves and pressure reducers plus the solenoids - etc.. I like your design a lot. Mine's not 'man powered' but it does run off solar!! Thanks for posting the video good stuff.

Thanks for posting and congrats on the job well done.

HEy! Thanks for taking the time to share your idea. Amazing how many people in the comments know than you, but I haven’t seen them put up a video. I’m looking at doing some type of adjustable lift in a Van. You ideas will help me launch that.

That's Pretty Awesome.... Love the way you set it up...been looking at doing one myself..... but I'm goin ti do nine with a power winch.. I've got about 7 or 9 ft to lift it up..... Great Job... And Thanks For The Inspiration.....

This is sooooo cool. Thank you for sharing

you can get higher... just dont start out so low with your cable setup. youre not going to be sleeping that low anyway. great setup bman!

Whoever is layin down your ink is amazing !

Nice job on the lift.

brilliant! really inspirational!! great work!!!

great job guys!

Shorten your four individual cables (cos you never want the bed all the way down to the floor, THEN it will winch closer to the roof!

Brilliant video

Brilliant! thank you for sharing. thats my next move.

cool, I also watched that ana white was doing something similar, an elevator bed that uses motor to lift it up

If you moved the winch mount closer to one of the corners of the bed, it would make your cable longer and have more room to raise up. Just and idea.

Genius! We just put our on drawer glides, but I almost like this better!

@larrybe2900

3 жыл бұрын

I wonder if one could fashion a guide using an inline roller skate wheel instead of the one used here?

@thechumpsbeendumped.7797

2 жыл бұрын

@@larrybe2900 I was thinking the same. They’d be quieter and smoother when winching and not rattle when you get in and out of bed. I’d put stop pins for the minimum hight so the mechanism isn’t under tension when the beds in use, the same stop pins could be moved to the top when it’s stowed. I’m also not keen on self tapping screws as I’ve had a few work loose in my work van. I’d probably use dome head (square shank) stainless steel bolts and bolt though the body and the uprights from the outside. I used the same method when connecting studs to the walls inside of my shipping container shed where a knew there was gonna be something heavy hanging from it.

To add height when cranking, instead of coming straight from the 4 pulleys to the crank, go at an angle from the pulleys toward the shower side, then run through a hole there to a pulley on the outside, and run back down to the crank. That should increase the length of the run of the single cable from the junction of the 4 cables. Though given the age of this video, dunno if you’ll read this.

@2:17 For future reference, that's a "center punch". There are manual(hammer operated) and automatic(spring triggered) versions but they both do the same thing, create a little dimple for your pilot drill :)

@dmwi1549

2 жыл бұрын

I think his had a dimple on the end which would make that a finish mail set to drive a headless finish mail under the wood surface to allow wood putty on top. Punch would have pointy end.

@joemartinez8819

2 жыл бұрын

This is the same vid that the guy didn't know what a punch was??? Haha I've seen so many. Probably the best one yet for me.

@kellymorris6431

Жыл бұрын

Just started watching for the first time, so cute he called it a "du-dad" 😂

Great video and I love your idea of using the braking winch. Could you please do an update/review of this system after 3 years of use?

Buen vídeo 👌 gracias

I checked your build specs. In my opinion, you spent in excess of $600. You could have bought a complete garage lift kit for less than $300. Add another $100 for misc. parts. Admirable but, not frugal. Could have used a Marine 12V winch for about $70 additional.

you can separate the four wheels for more distance the will gives you more what you need

So when you go to sleep at a Walmart, where does the stuff you have to take out of the way go to? Love the idea. Also, the link provided for pulleys is different from what you use here or did you fabricate the double pulleys? Good explaining as you go along. Some more close ups inside would help more, but think I've got it. Thank you for posting this! You might want to add a metal sleeve in that bigger hole you made by the crank so as not yp wear wood away.

Wow, looks easy but I’m not sure if my husband can make it. Where I can get help? You did a great job!! 👍🏼👍🏼

He could’ve just moved the winch to the foot end of the bed and that would’ve given him enough diagonal length to get the bed up to the ceiling. The added advantage would be that the winch would be out of the way when getting in and out of the bed. 4 bottle screws connected to the 4 eye bolts would allow for the bed to be levelled when parked on a slope.

Not much on technical descriptions but hey, it works.

Very nice project. Thanks for making and sharing the video. I would trade the crank handle for a hex nut though. It would look nicer and then you could use a cordless drill and socket to do all the work of lifting/lowering the bed. BTW... the "little doo-dad" at 2:22 is called a punch, or nail setter. 👍

That'll work.

Hey--a DIY bed lift that actually works! Could also use a 12 v power winch with a back-up hand crank when power isn't available. Would like to have seen a diagram of pully cable threading.

Nice job man, very helpful video...So I was an electrician for 20 years and still work with my hands sometimes...so I think I may be able to do this. Looking to buy a van now...maybe I can get some coaching what do you charge? Lol. Oh did I just hear you say bus? Yea it does look pretty wide in the back

Cool! I’d be doing a small electric winch I think

This is a joke vid? Very funny. My kids laughed

maybe you would put a beam from the winch to the other side. the force tries to pull the bed frame together.

I give you 80 out of 100 for your effort and more importantly not given up, but I thing I have seen better ideas in other videos.

What is the brand of the pulley

Thanks for sharing, your video gave me an idea how to do my platform/living room lift :) but maaan, its not easy to adjust it just right especially with electric winch attached to it and being scared that around 70 kg or over will land on your head 😂

@thechumpsbeendumped.7797

2 жыл бұрын

If you use bottle screws to connect the 4 separate cables to the single one it would be fine tuneable from left to right and front to back. They’re more than strong enough for this type of application. I doubt the max weight is more than 660lbs including 2 people and I’d add stop pins to rest the bed on when in use to stop the mechanism from being under stress and creaking in use.

are you think install a motor for your bed sistem? thanks for explain.

Looks great! My husband and I are planning to do something similar in our van, possibly with a motor though. Do you notice the noise coming mostly from the crank, or is it the railing? Any ideas/plans to minimize that?

@JKLauderdale

4 жыл бұрын

A little bit of grease goes a long way - Sounded like there were 2 different sounds, one from the crank and one from on the rails.

There's this little thing called a spade bit, would make your life a lot easier. Great job overall though.

Sturdy enough to lift your atv!!!

Super interesting way of doing it! How are you feeling about that mattress? We are looking at different options for ourselves, and Casper is one of the ones we are looking at.

@DIYSkoolie

5 жыл бұрын

I love it. I've taken several naps on it. I like it more than my home mattress.

How many times have you gotten up in the middle of the night when nature calls and cursed the hand crank gears? Other than that good concept.

@Stormsteed

3 жыл бұрын

If they do a 6-8” mattress, the height will be above the gears, no problem. I think you’re more likely to curse when you hit that handle every time!

I love your Borg comment😅

Christ, that's strong! What are you planning on doing with this bed?

@larrybe2900

3 жыл бұрын

Probably utilize whatever pops up and comes to mind.

i knew it wouldnt go high enough, should have added a pulley at crank and put systems opposite corners.. hope no one busts head on crank..

Did this last?

Why mount the winch where you have to crawl over it to get in bed? Off to the side would have made more sense. And if your cables pulled more parallel to the tracks and some grease on the pulley axles would make it a lot quieter. Lastly why eye bolts at the top when a bolt and fender washers through the cable eyes would be stronger over time?

The vehicle you’re installing in, no concern for GVW issues/ materials seem like they are maybe as heavy as you could have found. Certainly durable, but gas, breaks, suspension busters.

just need some dw40

Super creative, but your crank looks dangerous...

Do those unistrut trollies rattle when going down the road?

@DIYSkoolie

Жыл бұрын

They do not. I really hate rattling and squeaking, so I would have definitely noticed.

Where did you get the rollers and track?! I have been searching and cannot find those specific type of one just the standard stud ones. Thanks

@DIYSkoolie

3 жыл бұрын

There's a link to them in the description. amzn.to/2WX7LNs

@richardvalitalo3670

Жыл бұрын

Barn door tracks.

Two years later. Neat project. Is it still working? Worth the time, effort and $$? Do you use it like you thought you would?

@DIYSkoolie

2 жыл бұрын

I still love it. It is super strong and convenient. Being able to lift it has come in handy a few times, but it usually sits in the low position, because that's the easiest position to sleep on it. It makes storage much easier, though. I added tie-downs so it doesn't bounce while in motion, and drilled some more holes in a couple of positions so that the bed could rest on the rails at various heights. I've seen some variations inspired by this bed in other rigs, with some improvements, since I published this video. The best I saw was a version where somebody repositioned the corner pulleys so they were hidden under the bed. It made the bed platform a lower profile, helped it sit lower in the down position, and keeps the cables out of the way. I also saw somebody use an electric winch, instead of a hand crank. I thought about doing that, but I kind of like the analog feel of man power. Nothing more off-grid than a man-powered mechanical solution! If I ever change my mind about that, it would be a pretty simple upgrade, though. As far as cost, I'm happy with it. It's cheaper and stronger than some of the kits I've seen for RVs, and it's built for the space. If I could change anything, I probably would weld a metal platform together and use smaller pulleys to lower the profile of the platform. But, that would also be much more expensive. The tie-downs are also a must-do, as you can see in my bed lift follow-up video.

May I make a suggestion? Remove the crank mechanism and insert a six inch block of wood to give you that extra few inches.

Double nut those bolts w\ lock washer between them. They'll never back out on there own..

The BORG ate up Orchard Supply in California and left the employees without jobs. I preferred going there as opposed to the other big box stores. The employees actually knew something.

@canyonspecracing4296

3 жыл бұрын

They reopened under “outdoor supply hardware” at least there is on in San Leandro that just opened.

how do you down the bed?. when you changes the direction of the crank. the weight of the bed it don't get down quickly the base. how do you control get down the bed? . . . sorry I don´t have much english.

@DIYSkoolie

3 жыл бұрын

The crank has a brake. Wherever you stop cranking is where it stops and holds. It works both directions.

nice bed lift mechanism, unfortunately for the wrong van.

Can you sleep on this at any level?

how did you keep the cable on the bottom pullies from coming off the pully as they are not captured?

@DIYSkoolie

2 жыл бұрын

The weight of the bed and having the bed strapped down keeps the cables on the pulleys. The straps were added later, and aren't covered in this video.

@DIYSkoolie

2 жыл бұрын

See video 53.

great where did you get your parts,thanks any body know

@DIYSkoolie

9 ай бұрын

Links for most parts are in the description.

Do I need to use cable? Could I use rope, climbing route rested for 200+lbs?

@susanbeals7597

6 ай бұрын

Rope will wear out and snap often. Not safe.

@ajhall9718

6 ай бұрын

Thanks

Kind of the same set up I want to do in a bus

Galvanized

Big up from bradford uk. Cool as fuck.

Ignore the assholes with their negative comments! I think that people don’t realize that most of the “kit” elevator beds require power. I think you came up with a pretty good plan that requires no electricity. I am looking for a solution to creating an elevator bed (manual powered). The spacing is different from yours, and I don’t know how to overcome that. I want to use a full-size bed, not across, but length-wise, in the center of an 8-foot wide trailer. I am hoping for space to move on each side of the bed while it is in the down position. I contacted Rocky Mountain Tiny Homes to request help (which I am willing to pay for), and Greg said no. Not just no, but basically no way. How do these companies function with such shitty customer service? I know what I want is do-able, but I can’t seem to work it out. I am disabled, want a decent place to live, but that pesky bit of massive brain damage gets in the way of me figuring out the mechanics.

@susanbeals7597

6 ай бұрын

2 reasons I can think of why he may have said "No". First, depending on what your interior wall covering material is, your walls in a wood frame built home are going to be at least 4" thick each, so interior width on an 8' wide home is 88" or less. This means you'll have less than 3' total clearance alongside the bed lengthwise. Divide that by 2 sides of the bed and that's only about 17" on each side. But the bigger problem is how do you anchor your platform lift framework??? It needs to be secured to the walls for stability, so if it's built in the middle of the room, how would you anchor it? And if you do anchor it to the studs as needed, and just use a very wide platform for the mattress, when it is lowered, you'd have no way to step around it, without stepping up, onto the platform and walking across the platform itself, then down to the floor, but the lift brackets protrude about 2", so now you're down to 15" clearance on each side of the mattress. Enough for storage space but not really for walking, unless you just walk on one side (30").

why not set your bottom level heigher and reduce your ropes at the top of each upright and keep your 4 rope connection as far back as you could.

A 'center punch' is a doodad??🤣

Gönlünce olsun, hak ettin dinlenmeyi 31.58

Don't care for the crank-seems like I would run into it with a leg or?plus alot of errors back and forth. Going to go with a cheap 12v winch on the floor with remote.

That's gotta make noise when driving. THis seems a cumbersome but cheap solution. If you want to spend money on this concept you're far better off with a happijac system but that's way more expensive.

@msuc5vette

3 жыл бұрын

At $100 for each plus shipping for just the tracks I don’t think I wouldn’t call this cheap. Seems quite study though. The tracks and trolleys are really designed for the loads to be on a different plane though. It’s a very cool design, but unless you really need to adjust the bed height in 1/32” increments or whatever the ratchet mechanism provides, this is likely overkill cost wise.

27:05 Thats what she said.4

The ‘do dad’ is a ‘center punch’. I don’t believe you got on that mattress with your dirty boots on. 🤦🏼‍♀️

Resistance is futile…

20:55 really dude?? What are you doing.?You found the most inefficient way to cut a cable.

i woudn t trhust this , not for long anyway

Stik some fabric in your runners stop the squeeking!!??

Im concerned about the tension you’re putting on the front and rear beams. The winch and pulleys are pulling the center of the beams together and only the frame top is resisting. You should add a front to back beam to resist this compression. Also, you’d get more height if you relocated your eye bolts on the pillars higher or made the location that they enter into the frame lower. At the top of the travel, the angle of the cable is almost horizontal, so it require much more force to continue upward.

@larrybe2900

3 жыл бұрын

28:01

@HybridBattery

3 жыл бұрын

@@larrybe2900 those slats won’t resist much compression. A 2x4 or some threaded rod would be better.

@larrybe2900

3 жыл бұрын

@@HybridBattery There is not much weight involved with this application.

Bro, Real talk, Very cool but please dont sleep above your motorcycle. The fumes that would come off even an out of use motorcycle are not something you want to be inhaling 8 hours a night.

@scottsammons7747

4 жыл бұрын

Don't be silly. Lots of folks use toyhauler trailers with happijac beds and snowmachines / bikes. Well below the action levels of any vapors.

@joshualioi5144

4 жыл бұрын

@@scottsammons7747 If you say so~

Sorry Bud..blah, blah, blah! You turned a 6 min. video into over a half hour of BORING!

@larrybe2900

3 жыл бұрын

No one twisted your arm to watch it. Wow!

If you don't know what a center punche is why would anybody watch your video and take your advice you don't even have everything necessary at the time of filming

@DIYSkoolie

4 жыл бұрын

You seem fun.

@kathrynb4683

4 жыл бұрын

Droll Jeffrey..very droll. 🙄 hehe

@johntalbert8227

4 жыл бұрын

If you would have watched the whole video, you would have learned that he did a pretty darn good job. Not a whole lot of stuff out there showing how to make your own elevator bed.

@leonardozavala906

4 жыл бұрын

Mad much lol it’s KZread not your local news bro

@constancerobinson1377

3 жыл бұрын

When you grow out of your tricycle, come back to KZread and make snarky comments