Just an observation, when you cut those charge pipes for the intercooler, you DEFINITELY want to either have the ends rolled, or at least get a pair of wire crimper that have the bump in the end that you can crimp a roll into the end of the tubing. I have built quite a few turbo cars, and I learned that the hard way.

@mattbauman

3 жыл бұрын

Was going to say something similar.

@emilevervaet7234

3 жыл бұрын

And he should weld some longer pieces together.

@justinguarino201

3 жыл бұрын

I was thinking weld the whole thing and not worry about it popping off

@emilevervaet7234

3 жыл бұрын

@@justinguarino201 yes indeed and it would help with the clean look.

@BubbleBrawler

3 жыл бұрын

I think Robbie said he didn’t go for welds because he can’t TIG weld, probably none of his buddies can either and I’m guessing he didn’t want to go and pay someone to do it especially during lockdown and stuff

Can’t wait for the hot wheels collection 😂

@BrokePremiere

3 жыл бұрын

Right! I've been waiting and waiting.

I would recommend a kswap intercooler, as in one with both ports on the same side

Dude, I would love to have some home improvement vids too! I loved the shop update/upgrade vids, I’m sure plenty of people would like seeing the house content too

robbie. mount the intercooler above the transmission to minimize piping. plus you can add a scoop on the hood to increase engine bay ventilation.

@lillythepone2994

3 жыл бұрын

So you’re telling him to do it the subie way?

When you spoil your car with amazing K tune parts, do a showstopper engine bay and you just buy the jankiest ebay turbo kit🤣 #commitedcrew

You always upload right when I am about to do my homework 😂 But thanks, you are helping me procrastinate.

@tdoucette8281

3 жыл бұрын

Same

Chris looks so weird after he shaved lmao

@BrokePremiere

3 жыл бұрын

lol right, totally different.

hahahah "I love it, because it looks so sh***ty right now!" Exactly how I DON'T feel on everyone of my flip videos. LMAO the best statement ever. Love the content Robbie keep it up.

Never clicked faster in my life

@olegnaed171

3 жыл бұрын

Fr

4:37 for everyone that wants to see shocked robbie over and over again ( like im doing rn)

Looks good, the cold side piping seems kinda long, shouldn’t really matter but I would have done a cooler with in/out in the same side shortening your piping. Quicker route to the t body is always better

Love this series so far.

Stoked to see it in its completion!!

The amount of effort that is behind these videos. Even just searching for parts is difficult but the payijg for some of them and then install them. Respect

Never finished the car thanks to all of you 🤣🤣🤣 Can't wait to see it runing!!!

This might be my favorite series yet 🔥

Robbie to be honest it would be best if you upgrade to a cx racing rsx intercooler as it’s like 200$ off of eBay it’s removes headache and clock the turbo to the fire wall, it would also helps it boost too.

Robbie you're one of the few people who can get me invested in a civic build, keep up the good work my guy!

Love the hatch build! Convincing me to get mine going already! Great content.

@brycemcneal7570

3 жыл бұрын

Also lmk how that turbo kit works if you can! Not a fan of cheapo’s but just want a nice, clean build.

Wow, I love K-tuned parts. They're ALWAYS such beautifully designed and manufactured parts. I have their adjustable coilovers on my turbo J32A and six speed manual swapped CG1 Accord and they've always been so awesome. My car rides so much better than even my Cadillacs did, and it's two inches from the ground. I love K-tuned and I have many many parts from them between my Accord and my fully built EJ8 Civic that makes 612 whp.

Great job Robbie!👍🏻

Getting me excited to start building the eg i have my eyes on🤩

Great one

Bruhh finally :D lets gooo

Keep the grind up Robbie. Road to 1 million baby.

My first video of yours ever seen super clean instant sub instant like keep up the amazing work

Yes!

Happy 260k subs Robbie!!!

Heck yeah thanks for the vid!

have the turbo point and run under the Cowl. It'll be lower in the bay, looks like it'll fit. and still give clearance for the shifter cables?

oh how i love the longer vids when they work, like this one

This is a beast build.

love the vids!

That top thing you called a "map sensor" is most likely the intake air temperature sensor. I dont mess with k series but on a b series the sensor on the intake manifold is the iat and on the throttle body is the map

robbie, you really should get a vertical flow intercooler that has its inlet/outlet both on the drivers side, would simplify the intercooler piping sooo much and be way cleaner, not to mention spool faster in theory because the piping is shorter

Love the content robbie keep it up hopefully Ill see you at some car meets this summer

Love this channel 💕

@davidfluksa8744

3 жыл бұрын

Under rated

yo looks so good man i want this one when your done lol actually i want all of them when your done lol

Most Honda guys when running the rbc will run the map sensor on the lower portion! Block off that top one! And the lower one looks better anyway!

I’ve never been this early to your videos

Literally my dream build, I want a K or H swap EK9 so bad. I have a EJ6 and I love it man, they are awesome cars!

Hey Robbie, why not go from turbu to the leftside of motor, down to the rad, and then pop from under de light on the right to the manifold? It would be less tube and cleaner look 😎 with the length of the tube you have there you will have a bunch of trubo lag...

Absolutely in love with this car!! All the parts are premium!! You will upset a lot of people if you don't line up races in this train after the project is finished!!! SUPER EXCITED FOR THIS TO RUN!

@prosperity144

3 жыл бұрын

this car is walking down many cars

We lit

i like it it looks good tbh

Ayeeee let’s goooo

"Im just super thankful it fell in this car, of all cars" he says about his car which was meant to just be cheapish but ending up being his best car... Youre killing it man!

I get this feeling that there's a new video and wouldn't you know it, there is!

Your the best 😺

The cleanest vans i ever seen

Also make sure you calibrate the tps sensor when you get ready to start it!

Do what I did when I had a project, and 4 ridiculously large fish tanks... pick the wall colour and paint the spot that will have the collection on so you can set it up, and it’s already painted the colour you want :) it looks like dookie for a while but it’s a construction site, haha.

Notification squad Wya!! Loving the videos Robbie

This car is going to be insane🤯

That ending was perfect 😂

With the K20C1 turbo coming as a crate engine with wiring harness and all. Would that be in the play for a build?

i love it

Sound track Lowkey 🔥

Noti gaaaang

My package should be coming any day now!!!

05 accord is cable driven, so is the rsx and the ep3

Your probably better to get a intercooler that both inlet and out run on one side closer to the driverside itll save you on piping.

Hey robbie what are your option on saabs I got a 2003 9-3 2.0t

So sick, can’t wait for this car to be ripping

Robbie ily bro ❤️

YOO I’m here Robbie

You should really invest in an intercooler with the inlet and outlet on the same side. Reduce the the amount if piping used, and lower the boost pressure being lost.

Man robbie is so lucky those bulbs didnt break 😂 pain in the ass to clean up

K swap intercooler!!!!! Would take a lot of that pipping out!

Notif gang!

I would get a new intercooler with both inlets on the same side, you could of spent a little more for a Rsx eBay turbo kit and maybe would have been better fitment

Hey so right now all your piping is circulating clockwise, what if the ''out'' of the turbo actually went on towards the passenger side, wouldn't you need much less pipe? Cause now it seems you need a bunch of extra pipe from the throttle body to the intercooler.

you need a different intercooler for sure. that setup would probably spool 500rpm faster with an intercooler with outlets on the same side

M8 don’t put to much sealant on the oil pan, it will get mixed with the oil and later it can gives problems in your engine. 👌👌👌

Where did you get the bolt in bung

Maybe it might look a bit more clean if the piping from turbo to the intercooler was painted black 🤔

@BrokePremiere

3 жыл бұрын

hmmm, that's not a bad idea.

Make sure you bubble the end of each intercooler piping so it doesnt pop off

Could the IC pipe from turbo not go left?

13:20 No. A garrett turbo is over 2000$, and a brand name kit usually is like 5000, you can add whatever you want on top of your ebay kit, you're still gonna be way cheaper.

That light wanted to get a closer look at the engine bay 😂 glad you ok and the car also 👌🏽

Where did you get the bolt on an fitting?

sometimes u upload when im in class and sometimes u upload when im done with school... u gotta get ur stuff straight robbie😂😂😭

Hey Bro. Could send a link to very thing I'll need to buy for that set up?

When are you going to install internal parts?

Bro how is the yonaka twin disc holding up

Yo, has anyone else in the US not gotten their knit cap, and CC tag yet?? I'm just curious bc I haven't yet.

Vtec rims would look amazing on your car

She looks so gorgeous 🥰🥰

I’m always early

u should get quick release oil drain plugs for all ur cars... my dad and i put one on his truck this weekend... it will make SO easier to change ur oil... and u wont get oil ALL over the ground... and if u get a hose to go on the little nipple that they come with u can put the end of the hose in ur oil catcher thing and then oil dosent go everywhere

Can’t wait for dyno day

the light falling video sent me

What's that store called? I'm starting my own hotwheels wall and I would love to check that store out after this crap is over! Love the channel man, thanks for keeping me sane during the day!

You should get red connectors to match the head

You should get leds to put under your hood

6th time asking for “robbies garage tunes” on Spotify. Last time someone replied with a link on Spotify of the song’s that he uses in vids. If you dont know im curious of what robbie listens to when he is just vibing or working on his cars not the sings he uses in his videos.👍

Dont forget to weld a bead on the pipe you cut lol done that before.

Does Robbie not know the difference between inner and outer tie rods? Did the listing say it came with 'tie rods' or 'out tie rods'?

Couldn't you route the hot side to the left side of the engine and cold side directly to the throttle body? Also like a person mentioned in the comments, don't forget to roll the edge of your piping if you don't want to blow while under boost...