I really enjoy watching these videos. I like how you show all the products and how they are used, even better when you show the alternate options that could be used. Keep up the great work. Thanks

Your the only detailer that won’t use brushes on the exterior , I understand why as I got black chrome painted alloys and the brushes swirled them up and they would do the same to the panels

@GYEON_official

2 жыл бұрын

Exactly. They are good for engine and some other parts but not on nice paint. Regards, Y.

@ImranAli-rp4kd

2 жыл бұрын

@@GYEON_official thanks for the videos , I learned a lot from you

amazing job

I'd love to see a video showing bath+ used in a foam gun.... Seems like an awesome idea!

Taking the wheels off to clean the wheel arches is not really possible for me. The wheels get prepared when I change over from summer to winter tyres with a tyre fitting shop, I don't change them myself. It would be useful to see a video of how to clean arches with the wheels on the car. You recommend two coats of fall out remover on the car, first underneath the foam which is washed off before applying again and washing with the mitt and shampoo?

I like gyeon product 👍 But i like wash my car with Rinseless wash. Expect one day Gyeon will make product for this new method 🤞

Ooooh thank you!!!

Gyeon 👍👍👍

I love the idea of using bathe+ in snowgun. Do you have any suggestions for using the solution in a pressure bottle? can it be even done? should the dilution be like 50ml to 1l?

Another really good episode. Is there a reason you didn't use the ceramic detailer as a drying aid or is this because you had already added some protection in the way of bathe+. Already looking forward to the next one.

@GYEON_official

2 жыл бұрын

You can use both CeramicDetailer or QuickDetailer, it has not bad influence in both cases. T

Great video again, how much Bathe+ did you put in the 1 litre foam cannon bottle?

@GYEON_official

2 жыл бұрын

I used between 20-30ml for a 500ml final solution. Regards, Y.

@chriswebster3197

2 жыл бұрын

@@GYEON_official thanks for the reply, I'll give it a try next time I clean my car.

I dig Wet Coat. I use it on my wheels. Why don’t you use detail brushes to get into tight places? They seem to be a better and easier option. Great video please send me some more Wet Coat thanks😃

Добрый! Возможно ли после нанесения Q2 WAX использовать шампунь Bathe+ и усилитель гидрофобных свойств по влажной поверхности WetCoat? Спасибо!

Wet coat is cool but only lasted a couple of weeks for me . One wash with bh auto foam and it was gone .

@GYEON_official

3 ай бұрын

Well, I would say that’s pretty strong, first off all because of how ease it is to apply versus the performance you get out of it. Some foams are very strong and this can be good but also has downsides. It’s not the first time I see rubbers loose their looks and performance after so called strong foam products. Regards, Y.

If using bathe plus out of a foam cannon this way, can quick detailer still be used as drying aid or is it an either or like the wet coat when using the plus?

@GYEON_official

2 жыл бұрын

Sure it can! It’s always good to reduce as much friction as possible to prevent scratching your paint. Regards, Y.

Great episode! I have Q2 wax, Wetcoat, ceramic detailer, cure and bathe +. Can you please help me with the right order of how, when and in which order to use them. I am a bit confused about the order and timing. Thanks

@GYEON_official

2 жыл бұрын

There are many combinations possible but stick to the basic ones. There are many videos available on how to use the products. And this will help you as well: gyeonservices.com/en/maintenance Regards, Y.

@JeLifeCoach

Жыл бұрын

Bathe+ when you wash. You can use ceramic Detailer as you want but in general cure goes on top of a ceramic coating once every 3 months as a touch up or refresher and ceramic Detailer would be used in weekly or biweekly maintenance washes. Normally i would use q2 wax or a ceramic coating. Q2 wax applied every 2-4 months depending on climate, conditions, and where you store it. You could use cure or q2 wax at the and interval, just depends on what product is meeting your needs. I never use wet coat but it see its validity and merit. Say you applied q2 wax at the beginning of the quarter, you could use wet coat as a monthly topper. Hope this helps.

Reasonable and functional procedure indeed! Would it be possible to then apply a vax over the Q2M Bath / Wetcoat?

@GYEON_official

Жыл бұрын

Yes but it would be a bit overkill. Regards, Y.

what was the tool that was used with the microfibre towel

@mergimi96

2 жыл бұрын

Any type of card (identity card, bank card, …)

@ImranAli-rp4kd

2 жыл бұрын

Yves don’t ever recommend to use brushes on any painted surface or chrome , piano black trim , gloss black trims etc and that’s why he uses microfibre and a plastic card to clean gaps and the grill

Hi, Just wondering what product was that being sprayed on the rear registration plate as it didn't look like bug and grime . Thanks

@GYEON_official

2 жыл бұрын

We used Q²M APC diluted 1:5 for all the crevices cleaning. Regards, Y.

@nicholasrutterford797

2 жыл бұрын

@@GYEON_official Thanks for the rapid response 👍

Can I use bug & grime on panel covered with ppf? Thanks

@GYEON_official

2 жыл бұрын

Yes. Works perfect. Regards, Y.

When ever I use Gyeon Wet Coat I get streaks and marks on the paintwork. My car is detailed and treated with Can Coat topped off with Gyeon wax. It looks amazing until I use Wet Coat following a wash then it looks terrible. Streaks and marks and it any gets on the side windows it looks shocking. What am I doing wrong ? I have now gave up trying with the product 😩 I now need to spend loads of time trying to remove the streaks which isn’t easy especially on the side windows.

@GYEON_official

2 жыл бұрын

Less is more! 2 to 3 sprays by panel is more than enough. Make sure to rinse heavily. For people having streaking issue, we would recommend to spray on the panel and spread with a dedicated wash mitt prior to rinsing.

@philipkeys3638

2 жыл бұрын

@@GYEON_official Thanks 😊 I will try this to se if things improve.

what is the brand of the piston water gun?

@GYEON_official

2 жыл бұрын

It’s a Karcher. Regards, Y.

Can APC be used for door shuts ?

@GYEON_official

2 жыл бұрын

Yes of course, just use it diluted. From 1-5 to 1-15 depending the job. Regards, Y.

Why is it called "detail" and not just "wash"?

@GYEON_official

2 жыл бұрын

Because there is quite a difference between a simple wash and an exterior detail, as for example the removal the wheels, cleaning arches, and so on.

1st

first