Hey i wanted to know that for my sofy towels that i use on the paintwork can i soak them in hot water with 20 ml of towel wash instead of using a washing machine
@sharyuchiha71069 сағат бұрын
I wanted to know if we can use it without prep? And after wiping off just water the area and dry it? And can your ceramic detailer be used as an alternate for prep please guide
@sharyuchiha71069 сағат бұрын
Great video! I wanted to ask for tge final buff should we spray more ceramic detailer on our soft wipe or not ?
@jorg_porsche_461316 сағат бұрын
Mijn porsche komt alleen gyeon op beter is er niet
@tonyshenouda423 сағат бұрын
Which one of those works on a matte ppf (Suntek) and is ceramic coated?
@iFeelsifyКүн бұрын
Matte wheels, which one do you recommend between Matte Evo and Q2 Rim?
@GYEON_official17 сағат бұрын
Q²RIM would be my choice. Regards, Y.
@bmarvinb3 күн бұрын
Hello, 1 to 1 ratio with what? Distilled water, or no?
@GYEON_official3 күн бұрын
Yes, Distilled water. Regards, Y.
@nirmalraja14596 күн бұрын
My name Nirmal we can use for all vehicles or only new vehicle only
@GYEON_official2 күн бұрын
It can be used on all types of fabric, old or new. Regards, Y.
@nirmalraja14596 күн бұрын
My name Nirmal we can use for all vehicles or only new vehicle only
@nirmalraja14596 күн бұрын
Hi sir I am from India
@gust94647 күн бұрын
Can you use cure with Mohs since it’s not SiO2?
@GYEON_official6 күн бұрын
Yes absolutely but we recommend do so only after the first maintenance wash.
@TheGodofSEO7 күн бұрын
Just used this for the first time (as instructed by the video). I’m a believer. Looks amazing.
@charles-antoinelapierre71679 күн бұрын
Hi, I plan to do Mohs Evo on my car, do you suggest me to apply Cure on top of it or not?
@andytieu6049 күн бұрын
How many rims can 1 bottle do? Just 4?
@GYEON_official6 күн бұрын
Depends on the rim size and complexity but in general you can do 2 sets of wheels with one bottle. Regards, Y.
@caspervangrieken785514 күн бұрын
Most Gyeon products are great, but the shampoo is not my product. I just do not get any foam with Bath products. For shampoos I am using other product.
@GYEON_official14 күн бұрын
Q²M Bathe does foam up great just as Q²M Restart, Q²M PPF Wash. The only shampoo that is less foamy because of it’s SiO2 content is Q²M Bathe+. Do you have very hard water in your area? Very strange you can’t make the above foam up. Regards, Y.
@Health-is-Wealth9215 күн бұрын
So what use is the reset or the bathe + if they can’t even remove bug and grime in the initial cleaning process. Some products are unnecessary
@Nisotovski18 күн бұрын
Can i wash and reuse the microfiber towels?
@GYEON_official17 күн бұрын
You can but we strongly recommend not to you use them on paint anymore. Of course they can serve many other purpose like engine bay or wheelarch cleaning and many more. Regards, Y.
@anhtuanb19 күн бұрын
What do you recommend for maintaining EVO Infinite ceramic coating on PPF on a weekly, monthly, or few months basis? I have a daily driver putting on about 400 miles a week and I live in NY weather. Thank you.
@GYEON_official19 күн бұрын
First of all I would suggest Q²M PPF Wash as your regular shampoo, especially when winter kicks in. Q²M PPF Maintain as your drying aid is always a great choice but don’t forget to do a specific chemical decontamination once every 3 months. Regards, Y.
@lesiakadam197720 күн бұрын
Just used Syncro kit on my 2017 Mazda 6 Soul Red. I was aware that the SKIN is not as slick as MOHS and I was OK with it. But after applying SKIN I was so disappointed. I'm not sure if instead of SKIN, I should have applied a second layer of MOHS... A week later I applied Gyeon CURE and it darkened the paint further. It seems like a great maintenance product. Overall I am kinda happy with Gyeon Syncro kit. The paint looks amazing now. I'm just not sure what's the SKIN's purpose there, opposite of 2nd layer of MOHS...
@Health-is-Wealth9221 күн бұрын
Can I use this on leather seats
@GYEON_official20 күн бұрын
Yes but as per manual don’t spray on the seats amd don’t use it as a leather cleaner. It’s what the label says, an “Interior Detailer” with great bacterial removal properties. For leather cleaning there is for example Q²M LeatherCleaner Natural or Q²M LeatherCleaner strong, all available according to your needs. Regards, Y.
@porkycodm573921 күн бұрын
How long does it last for? What’s the maintenance need for it? I’ve heard good stuff from can coat :)
@GYEON_official20 күн бұрын
Please check the links below, it will give you a lot of free information that will definitely help you. kzread.info/dash/bejne/Z6KaupaBc7zXaJc.htmlsi=ImZ1f0yrPrJosF1o kzread.info/dash/bejne/lHeCmsh6qtnAZps.htmlsi=Nz_jX0h7E0fkcFW7 Regards, Y.
@guy634521 күн бұрын
Just ordered this ,what product i have to follow up with after using this product?
@GYEON_official20 күн бұрын
There are different options depending on your expections. When durability is your main goal then Q²M PPF Evo is the way to go. A quicker option that can be applied after every wash is Q²M PPF Maintain or even Q²M Wetcoat. We reach out option to cover the need and expectations of different persons. Regards, Y.
@ecobritefl288422 күн бұрын
I’m ready
@Lovefchicks14 күн бұрын
Its from 2023 - kzread.infoX2dr9ETQdTk?si=PX-C6Z380HkKi7WK
@soliveirajr22 күн бұрын
Does the product have an expiration? I bought it 2 years ago and kept half bottle in the shade. I'm wondering if I can still use it on another car. Thanks!
@GYEON_official22 күн бұрын
If the bottle has been opened I would not recommend to use it. Regards, Y.
@DetailEnthusiast00722 күн бұрын
Love these videos, so thorough and helpful.
@HeidiandFranny22 күн бұрын
I love their Rim. I ceramic all the wheels on our cars. I've even used Rim on our boat! Talk about tough environment... Salt and sun. But the Gyeon is amazing and has already lasted over a year and still going strong. Love Gyeon!
@DetailEnthusiast00723 күн бұрын
Thank you
@CarmeloGiliberto26 күн бұрын
is this to be used before polishing or also before ceramic coating?
@perfectshave8528 күн бұрын
Is Restart the equal to Carpro Descale? A slightly acidic car shampoo?
@GK-Greece28 күн бұрын
Is cure helps to delete waterspots on mohs evo coated cat ?
@SuperMatador197829 күн бұрын
Unbelievable all the videos don’t give a $h!t about the environment. All those iron particles and dirt as a gift for Mother Nature. ☀️ Love the products but not the videos.
@GK-Greece29 күн бұрын
Gyeon is a problem if in my coated car with mohs evo dropped water after 48h from i coated my car ???
@GK-Greece29 күн бұрын
Gyeon is a problem if in my coated car with mohs evo dropped water after 48h from i coated my car ???
@GYEON_official28 күн бұрын
It’s not a problem but the longer you can keep the car dry, the better. Regards, Y.
@GK-Greece28 күн бұрын
@@GYEON_official oufff🥹 thank you 🙏🏻
@igoraratas781129 күн бұрын
Hello @gyeon! Would it be acceptable to utilize the Strong Variant for a brand-new car? What are the drawbacks of opting for the strong option? Unfortunately, there's no mild variant accessible in my area.
@GYEON_official28 күн бұрын
The best thing to do here is to dilute the strong version 1:1 with demineralised water. Regards, Y.
@tenzin044Ай бұрын
Hi there! Love Gyeon products and even bottles design. But products working so far really good for me. Btw if I want use Glass+ (love it!) I should still use Prep? I though it's only after polishing. Greetings from UK, Tom.
@GYEON_officialАй бұрын
Hi, you can use Q²M Glass+ without polishing or the use of Q²M Prep. Of course the cleaner and contaminant free the glass, the better the performance will be. Regards, Y.
@daveallsopp320Ай бұрын
What about wet coat+
@GYEON_officialАй бұрын
The Q²M WetCoat bottles will stay orange but of course will have the new labels, key icons and new triggers. Regards, Y.
@alvin3502Ай бұрын
I heard gyeon cure can be used on freshly coated cars. How long should i wait before i apply cure after gyeon pure coating application?
@GYEON_officialАй бұрын
Wait at least 2h before applying Q²M Cure. Regards, Y.
@MrPepelongstockingsАй бұрын
What about 'repairing' vs restoring piano trim? I used Chemical Guys VRP (vinyl rubber, plastic); the product having very good reviews online, in the tens of thousands and still 5 stars. Used it on my slightly dulled and midly scratched exterior piano trim, and it ended up splotchy and matte, very much grey instead of black. Been that way for a year ever since (it isn't build-up or something to be buffed out/off), and been too afraid to touch it up again and make it worse again. Any idea what I might have done wrong? Can this be restored in another way? Thanks for any advice in advance!
@NisotovskiАй бұрын
Can i use gyeon can coat? Gyeon Rim is not in stock and i dont have time to order it and waith?
@GYEON_officialАй бұрын
Yes you can. Regards, Y.
@daveallsopp320Ай бұрын
Wet coat is the elixir of life.
@anidiotinaracingcar4874Ай бұрын
Yves, have you done a video on how to maintain your coating afterwards? Anything specific after each wash? Or do you simply recoat them a year later when the protection wears down?
@GYEON_officialАй бұрын
Please have a look here: kzread.info/dash/bejne/lHeCmsh6qtnAZps.htmlsi=L3k5V8iCw5EU313Q Recaoting can be done but all depends on the type of coating you have on your car, your maintenance routine and your mileage. Decontamination is very important, that’s why we made this video. Regards, Y.
@anidiotinaracingcar4874Ай бұрын
@@GYEON_official Will do, thanks!
@anidiotinaracingcar4874Ай бұрын
How would you prepare a freshly refinished set? Let them degas? Clay? No clay?
@GYEON_officialАй бұрын
Why would you clay a freshly painted set of wheels? Depending the paint process degassing is always good although on powdercoated wheels it’s not an issue. Again many variables are possible. Regards, Y.
@anidiotinaracingcar4874Ай бұрын
@@GYEON_official I don't know, I'm asking. You might want to remove contaminants from other processes in the paint shop. Or overspray, I don't know. The wheels will not be powder coated. They will be finished with a 2K (bicomponent epoxy) top coat.
@GYEON_officialАй бұрын
I would let them gas out and then do a proper degreasing stage before applying Q² RIM. Regards, Y.
@anidiotinaracingcar4874Ай бұрын
@@GYEON_official Thanks! Several weeks, then, right?
@tetovabossАй бұрын
How much is the formula to mix it with water the konzetrat bottle
@GYEON_officialАй бұрын
Q²M Glass is a ready to use product. Regards, Y.
@burimalimi6490Ай бұрын
What exactly does Cure do to the painted surfaces? I feel like I really dont understand this product that well. I thought it was just to be used on top of freshly laid ceramic coating to protect it while it’s still ”curing”?
@riccardor1060Ай бұрын
Is the Iron Wheel Cleaner safe of non-painted calipers? Almost every iron remover take the calipers to be rusty, when calipers are not painted.
@GYEON_officialАй бұрын
Almost all cleaning products will do something to unpainted calipers. It’s a matter of time. For the price a car costs these days, calipers should be painted imho. Get them painted if you can and coat them after that, the only way to keep them looking good. Regards, Y.
@Messi10billyАй бұрын
What do you think of spraying tar remover. (Applies to iron remover too) then cover them with ph neutral snow foam? So it can dweel longer and maybe it the iron / tar remover can be more effective?
@GYEON_officialАй бұрын
With Q²M Iron yes, with Q²M Tar it’s not efficient. Regards, Y.
@Messi10billyАй бұрын
How do i maintain the towels?
@GYEON_officialАй бұрын
Wash them with hot water and Q²M TowelWash. Regards, Y.
@Messi10billyАй бұрын
Why didnt u rinse the wheel first
@GYEON_officialАй бұрын
Because I wanted to use the Q²M IronWheel cleaner to it’s full potential. Diluting it with water doesn’t make performance better. Regards, Y.
@drany7Ай бұрын
Wet coat is cool but only lasted a couple of weeks for me . One wash with bh auto foam and it was gone .
@GYEON_officialАй бұрын
Well, I would say that’s pretty strong, first off all because of how ease it is to apply versus the performance you get out of it. Some foams are very strong and this can be good but also has downsides. It’s not the first time I see rubbers loose their looks and performance after so called strong foam products. Regards, Y.
@Messi10billyАй бұрын
How do I wash my big drying towel after using a ceramic spray as drying aid
@GYEON_officialАй бұрын
A gentle machine wash with Q²M TowelWash with 30 degrees Celcius is all you need. Regards, Y.
Пікірлер
Hey i wanted to know that for my sofy towels that i use on the paintwork can i soak them in hot water with 20 ml of towel wash instead of using a washing machine
I wanted to know if we can use it without prep? And after wiping off just water the area and dry it? And can your ceramic detailer be used as an alternate for prep please guide
Great video! I wanted to ask for tge final buff should we spray more ceramic detailer on our soft wipe or not ?
Mijn porsche komt alleen gyeon op beter is er niet
Which one of those works on a matte ppf (Suntek) and is ceramic coated?
Matte wheels, which one do you recommend between Matte Evo and Q2 Rim?
Q²RIM would be my choice. Regards, Y.
Hello, 1 to 1 ratio with what? Distilled water, or no?
Yes, Distilled water. Regards, Y.
My name Nirmal we can use for all vehicles or only new vehicle only
It can be used on all types of fabric, old or new. Regards, Y.
My name Nirmal we can use for all vehicles or only new vehicle only
Hi sir I am from India
Can you use cure with Mohs since it’s not SiO2?
Yes absolutely but we recommend do so only after the first maintenance wash.
Just used this for the first time (as instructed by the video). I’m a believer. Looks amazing.
Hi, I plan to do Mohs Evo on my car, do you suggest me to apply Cure on top of it or not?
How many rims can 1 bottle do? Just 4?
Depends on the rim size and complexity but in general you can do 2 sets of wheels with one bottle. Regards, Y.
Most Gyeon products are great, but the shampoo is not my product. I just do not get any foam with Bath products. For shampoos I am using other product.
Q²M Bathe does foam up great just as Q²M Restart, Q²M PPF Wash. The only shampoo that is less foamy because of it’s SiO2 content is Q²M Bathe+. Do you have very hard water in your area? Very strange you can’t make the above foam up. Regards, Y.
So what use is the reset or the bathe + if they can’t even remove bug and grime in the initial cleaning process. Some products are unnecessary
Can i wash and reuse the microfiber towels?
You can but we strongly recommend not to you use them on paint anymore. Of course they can serve many other purpose like engine bay or wheelarch cleaning and many more. Regards, Y.
What do you recommend for maintaining EVO Infinite ceramic coating on PPF on a weekly, monthly, or few months basis? I have a daily driver putting on about 400 miles a week and I live in NY weather. Thank you.
First of all I would suggest Q²M PPF Wash as your regular shampoo, especially when winter kicks in. Q²M PPF Maintain as your drying aid is always a great choice but don’t forget to do a specific chemical decontamination once every 3 months. Regards, Y.
Just used Syncro kit on my 2017 Mazda 6 Soul Red. I was aware that the SKIN is not as slick as MOHS and I was OK with it. But after applying SKIN I was so disappointed. I'm not sure if instead of SKIN, I should have applied a second layer of MOHS... A week later I applied Gyeon CURE and it darkened the paint further. It seems like a great maintenance product. Overall I am kinda happy with Gyeon Syncro kit. The paint looks amazing now. I'm just not sure what's the SKIN's purpose there, opposite of 2nd layer of MOHS...
Can I use this on leather seats
Yes but as per manual don’t spray on the seats amd don’t use it as a leather cleaner. It’s what the label says, an “Interior Detailer” with great bacterial removal properties. For leather cleaning there is for example Q²M LeatherCleaner Natural or Q²M LeatherCleaner strong, all available according to your needs. Regards, Y.
How long does it last for? What’s the maintenance need for it? I’ve heard good stuff from can coat :)
Please check the links below, it will give you a lot of free information that will definitely help you. kzread.info/dash/bejne/Z6KaupaBc7zXaJc.htmlsi=ImZ1f0yrPrJosF1o kzread.info/dash/bejne/lHeCmsh6qtnAZps.htmlsi=Nz_jX0h7E0fkcFW7 Regards, Y.
Just ordered this ,what product i have to follow up with after using this product?
There are different options depending on your expections. When durability is your main goal then Q²M PPF Evo is the way to go. A quicker option that can be applied after every wash is Q²M PPF Maintain or even Q²M Wetcoat. We reach out option to cover the need and expectations of different persons. Regards, Y.
I’m ready
Its from 2023 - kzread.infoX2dr9ETQdTk?si=PX-C6Z380HkKi7WK
Does the product have an expiration? I bought it 2 years ago and kept half bottle in the shade. I'm wondering if I can still use it on another car. Thanks!
If the bottle has been opened I would not recommend to use it. Regards, Y.
Love these videos, so thorough and helpful.
I love their Rim. I ceramic all the wheels on our cars. I've even used Rim on our boat! Talk about tough environment... Salt and sun. But the Gyeon is amazing and has already lasted over a year and still going strong. Love Gyeon!
Thank you
is this to be used before polishing or also before ceramic coating?
Is Restart the equal to Carpro Descale? A slightly acidic car shampoo?
Is cure helps to delete waterspots on mohs evo coated cat ?
Unbelievable all the videos don’t give a $h!t about the environment. All those iron particles and dirt as a gift for Mother Nature. ☀️ Love the products but not the videos.
Gyeon is a problem if in my coated car with mohs evo dropped water after 48h from i coated my car ???
Gyeon is a problem if in my coated car with mohs evo dropped water after 48h from i coated my car ???
It’s not a problem but the longer you can keep the car dry, the better. Regards, Y.
@@GYEON_official oufff🥹 thank you 🙏🏻
Hello @gyeon! Would it be acceptable to utilize the Strong Variant for a brand-new car? What are the drawbacks of opting for the strong option? Unfortunately, there's no mild variant accessible in my area.
The best thing to do here is to dilute the strong version 1:1 with demineralised water. Regards, Y.
Hi there! Love Gyeon products and even bottles design. But products working so far really good for me. Btw if I want use Glass+ (love it!) I should still use Prep? I though it's only after polishing. Greetings from UK, Tom.
Hi, you can use Q²M Glass+ without polishing or the use of Q²M Prep. Of course the cleaner and contaminant free the glass, the better the performance will be. Regards, Y.
What about wet coat+
The Q²M WetCoat bottles will stay orange but of course will have the new labels, key icons and new triggers. Regards, Y.
I heard gyeon cure can be used on freshly coated cars. How long should i wait before i apply cure after gyeon pure coating application?
Wait at least 2h before applying Q²M Cure. Regards, Y.
What about 'repairing' vs restoring piano trim? I used Chemical Guys VRP (vinyl rubber, plastic); the product having very good reviews online, in the tens of thousands and still 5 stars. Used it on my slightly dulled and midly scratched exterior piano trim, and it ended up splotchy and matte, very much grey instead of black. Been that way for a year ever since (it isn't build-up or something to be buffed out/off), and been too afraid to touch it up again and make it worse again. Any idea what I might have done wrong? Can this be restored in another way? Thanks for any advice in advance!
Can i use gyeon can coat? Gyeon Rim is not in stock and i dont have time to order it and waith?
Yes you can. Regards, Y.
Wet coat is the elixir of life.
Yves, have you done a video on how to maintain your coating afterwards? Anything specific after each wash? Or do you simply recoat them a year later when the protection wears down?
Please have a look here: kzread.info/dash/bejne/lHeCmsh6qtnAZps.htmlsi=L3k5V8iCw5EU313Q Recaoting can be done but all depends on the type of coating you have on your car, your maintenance routine and your mileage. Decontamination is very important, that’s why we made this video. Regards, Y.
@@GYEON_official Will do, thanks!
How would you prepare a freshly refinished set? Let them degas? Clay? No clay?
Why would you clay a freshly painted set of wheels? Depending the paint process degassing is always good although on powdercoated wheels it’s not an issue. Again many variables are possible. Regards, Y.
@@GYEON_official I don't know, I'm asking. You might want to remove contaminants from other processes in the paint shop. Or overspray, I don't know. The wheels will not be powder coated. They will be finished with a 2K (bicomponent epoxy) top coat.
I would let them gas out and then do a proper degreasing stage before applying Q² RIM. Regards, Y.
@@GYEON_official Thanks! Several weeks, then, right?
How much is the formula to mix it with water the konzetrat bottle
Q²M Glass is a ready to use product. Regards, Y.
What exactly does Cure do to the painted surfaces? I feel like I really dont understand this product that well. I thought it was just to be used on top of freshly laid ceramic coating to protect it while it’s still ”curing”?
Is the Iron Wheel Cleaner safe of non-painted calipers? Almost every iron remover take the calipers to be rusty, when calipers are not painted.
Almost all cleaning products will do something to unpainted calipers. It’s a matter of time. For the price a car costs these days, calipers should be painted imho. Get them painted if you can and coat them after that, the only way to keep them looking good. Regards, Y.
What do you think of spraying tar remover. (Applies to iron remover too) then cover them with ph neutral snow foam? So it can dweel longer and maybe it the iron / tar remover can be more effective?
With Q²M Iron yes, with Q²M Tar it’s not efficient. Regards, Y.
How do i maintain the towels?
Wash them with hot water and Q²M TowelWash. Regards, Y.
Why didnt u rinse the wheel first
Because I wanted to use the Q²M IronWheel cleaner to it’s full potential. Diluting it with water doesn’t make performance better. Regards, Y.
Wet coat is cool but only lasted a couple of weeks for me . One wash with bh auto foam and it was gone .
Well, I would say that’s pretty strong, first off all because of how ease it is to apply versus the performance you get out of it. Some foams are very strong and this can be good but also has downsides. It’s not the first time I see rubbers loose their looks and performance after so called strong foam products. Regards, Y.
How do I wash my big drying towel after using a ceramic spray as drying aid
A gentle machine wash with Q²M TowelWash with 30 degrees Celcius is all you need. Regards, Y.