Complete Dirtbike *TEARDOWN* Yamaha YZ250F (Engine Locked Up)
Автокөліктер мен көлік құралдары
Motocross Yamaha YZ250F with Locked Engine Complete Teardown
This bike had no maintenance done in its life, and it makes the disassembly difficult (pivot shaft on the swingarm is seized and rusted to the frame)
So we pull out the big guns and we take everything apart, from the swingarm, to the forks and we disassemble the engine to see why it’s locked
Tell me if you like the video or if it helps you! 🔧✌️
Join me in my projects: bit.ly/2Wd2L5Y
Live updates of the build on Instagram: / tristandurandbuilds
LINKS OF PARTS AND TOOLS USED IN THIS VIDEO:
- Bearing Puller Set (perfect for pilot bearings in blind holes): amzn.to/2OAWEXJ
- Motorcycle Flywheel Puller Set (worked on my Yamaha): amzn.to/2PTeqG5
Hi I'm Tristan!
I live in New York and when I'm not working on my fitness clothing line (yoked.net) I DIY with intensity 😅
For now, I restore wrecked, neglected or simply damaged motorcycles. So I disassemble, weld, machine and fix those bikes so they can go back on the road!
Join me in my projects: bit.ly/2Wd2L5Y
Live updates of my builds on Instagram: / tristandurandbuilds
If you have any questions write them in the comments and I'll make sure to help 👍
Thanks for watching!
#YamahaYZ250F #motocrossteardown #motocrossrebuild
Пікірлер: 60
Thanks for documenting your work!
@TristanDurandBuilds
3 жыл бұрын
I’m glad you appreciate that Chris 👍
This is amazing how aren’t you famous yet?!
@TristanDurandBuilds
2 жыл бұрын
I need to post a lot more often to get KZread famous, and it’s not possible as a man operation, editing videos is insane time wise… but I like the finished result 👍
Dope channel ! I’m subbed and can’t wait to see the next .... your content , editing , and communication , is very detailed clean and organized , plus I was thinking about getting one of those presses for my garage myself I might add , but thx for sharing the video it’ll be very helpful to a lot of us garage guys .😃
@TristanDurandBuilds
3 жыл бұрын
Thanks a lot Allan, that’s the channel for garage guys 👍
Love your content you should be wayyyyyy more famous!!!!
Danm !!! Génial je kiffe aussi la version anglaise! Très beau travail pour les vidéos! Smart !
@TristanDurandBuilds
3 жыл бұрын
Thanks 👍
After watching all youir videos in french, Im about to do it again in english just for personnal improvements, and I also think that I will never watch you in French again, there's lot a vocabulary on thesse videos, thumbs up ! Nice job Tristan !
@TristanDurandBuilds
3 жыл бұрын
Thanks for the comment Zachary 👍
very underrated channel you put great effort into this video and it is barely even exceeding 500 likes i subscribed enjoyed this!
"Wawawa-wa-wait"!! Lol love it!!
@TristanDurandBuilds
2 жыл бұрын
I do too
Oh man! Congrats for all those channels. Another French improving his technical English wording. Bravo pour tout ce boulot de montage et la clarté des tes explications ! Both channels subscribed! 👍🏻 Go On! 🤘
@TristanDurandBuilds
3 жыл бұрын
Thanks a lot Sylvain, et merci pour ton soutien ✌️
hehehehe its common for those shafts to seize up! Good start for this series mate! The rest is gonna be a piece of cake! I have faith in you :D
@TristanDurandBuilds
3 жыл бұрын
Yes I think this was the hardest, that thing was so stuck 😮
Using map gas worked great for me removing my swing arm bolt on 2001 yz250f. Popain gas is not hot enough.
I love the videos but I think a little less music and more information would be better
I have a yz250 f 2001 And could not get swing arm bolt out. Having a press is great but most people cant afford or have room for one. I used a map torch and socket extension to get mine out. Heat up bolt hole for awile then hit it with extension and it should pop out did it with mine. Good luck
Je me reregarde même tes vidéos en version anglaise ! Je vais finir bilingue !😅👌
@TristanDurandBuilds
3 жыл бұрын
That’s exactly what’s going to end up happening 👍
@fabinew7517
3 жыл бұрын
mdr ,pareil 👍
Oh my dude, buy a tusk case splitter / crank installer. It will change your life.
Tristan bought a bearing press finally whoop whoop
@TristanDurandBuilds
3 жыл бұрын
I did 👍 On Black Friday (it’s been sitting in it’s box since 😅)
That crank wtf it been butchered have faith in you Tristan
@TristanDurandBuilds
3 жыл бұрын
Yes that bike was really nicely put together 😅
You are a genius bro, I wish I had a friend like you. I bought the of these recently but it isn't running. The crank would not engage,what do you think is wrong or what should I check??? Anyone's help would be appreciated greatly.
@TristanDurandBuilds
2 жыл бұрын
You may have the same problem as me: bottom end bearing on the rod shot. That means taking the engine completely apart 🔧
Is there a washer that goes in between the transmission and bearing? I have a 04 YZ450F and the 5th gear is skipping. Seen video where you said dont forgot this washer when you was putting a engine together once and you said that. I think it was your video lol
Must not that expensive.Crankshaft and piston.And refining the cylinderwalls.Good work.Which state you live in?
@TristanDurandBuilds
3 жыл бұрын
You can see on the video I bought more than just a piston and crankshaft... 😅 I'm in NY ✌️
Pediste un quit para una del 2014 para ariva ??
@TristanDurandBuilds
2 жыл бұрын
🤷🏻♂️
very good crankshaft , bent? explain why .................thank you
@TristanDurandBuilds
3 жыл бұрын
HI 👋 I talk about it in the video, I show the broken bearing 👍
Where is the best place to order a 250 Yamaha YZf engine head
@TristanDurandBuilds
2 жыл бұрын
I’m not sure but you should definitely look at eBay and if you absolutely want new I would check partzilla 👍
Getting parts for a 2001 yz250f is impossible. Trying to get parts for it in 2022 is one peice at a time no rebuild kits that would make it cheaper. So if i were you dont bother getting a 2001 or older yz250f because parts are getting limited to none existent for them what a shame sucks to be stuck with this yz250f 2001 for that reason only.
How much do you think the engine weighed?
@TristanDurandBuilds
2 жыл бұрын
A dirt bike engine isn’t that heavy, I would say less than 100lb
Mais pour cois tu le fait en francais
@TristanDurandBuilds
2 жыл бұрын
🤷🏻♂️
Do anybody know.. When I turn my petcock switch on, don’t no gas flow down to my carb
@TristanDurandBuilds
Жыл бұрын
Sounds like your petcock is clogged by debris. Remove the tank, take the petcock off, clean the tank with hot water, put a new petcock in.
@dionbray4048
Жыл бұрын
@@TristanDurandBuilds Thank you for the help
@dionbray4048
Жыл бұрын
@@TristanDurandBuilds I forgot to mention that when I take the tank off..and I turn the petcock switch the gas flows out perfect…It’s just when I connect the line to the carb there’s no flow at all
@TristanDurandBuilds
Жыл бұрын
@@dionbray4048 well, there is no flow if your carb float is shut… the float maybe shut because it’s seized or simply because the float bowl is already full of gas…
@dionbray4048
Жыл бұрын
@@TristanDurandBuilds thanks again
Where u live ??
@GOON4GOD_OO
22 күн бұрын
He lives in New York
@sevaslee4865
22 күн бұрын
@@GOON4GOD_OO na already sold the bike
super crunchy ? my bad
@TristanDurandBuilds
3 жыл бұрын
Super crunchy indeed 😨
Nice vid, except for the horrible music...
@TristanDurandBuilds
3 жыл бұрын
Apparently it’s hard to make everybody happy 😅
Ой-ёй-ёй. Ты русский что-ли?
Are you gonna spend 5k on it then sell it for 3k ?