Video may be a year old but still helping people today , considering doing my first build on these engines completely stripping down and rebuilding in the shed! Videos like this really help alot! Cheers ✌

@mastersmods

2 жыл бұрын

That's exactly why I do the videos I do. I always say - if I can help one person then I'm happy. Good luck with it mate 👍

What a legend, this has helped me diagnose so many issues! Thanks!

@mastersmods

2 жыл бұрын

Glad to of been able to help 🙏

Points well made! I’m new to all this lark as I bought myself a st500 not so long ago - so thanks for the vid🤙

@mastersmods

2 жыл бұрын

Most welcome mate glad to help people. How you finding the St so far?

@markfivecortina5730

2 жыл бұрын

@@mastersmods I quote Borat in Kazakhstan accent “ I fuckeeng laav it’ . (I hope that comes across okay and not racist at all I really mean that) . What a great car. Thee best birthday present in ever.

great advice and well said about the drive shafts bud

@mastersmods

3 жыл бұрын

Ha ha cheers pal

Good vid mate great advice 👍🏻👍🏻

@mastersmods

3 жыл бұрын

Thank you mate, hopefully others think the same 😏

Imtereatsing info about the dash, hope that’s one problem I don’t suffer, at least I now no where to get it sorted if needs be. Thanks👊🏻

@mastersmods

3 жыл бұрын

At first I didn't think the problems I was having could be sorted by some soldering problems in the dash clocks, but I was happily wrong.

@J_I_Was

3 жыл бұрын

It is very simple fix any one can do on their own check my insta post you can see instagram.com/p/CF5Yay1nJhu/?igshid=1wapn2wl5bu15

@mastersmods

3 жыл бұрын

@@J_I_Was nice one

@J_I_Was

3 жыл бұрын

@@mastersmods good videos m8 I'm going through some 👍

@mastersmods

3 жыл бұрын

@@J_I_Was thank you 🙏 let me know what you think on any of them 👍🏼

This video is as informative as it's dull. Cheer up chap! More energy!

@mastersmods

Жыл бұрын

🤣🤣🤣 sorry mate that's just me, dull 😆 I'm not really one of these shouty loud types unfortunately

@nuryruso4525

Жыл бұрын

@@mastersmods mate don't mind me, be yourself, be happy! Love the ST 💪

Good information vid. Bought mine in 2009 and its still going strong. And bizarrely doing 17mpg around town is worth it. Great car for those who want to have fun.

@mastersmods

Жыл бұрын

I do miss mine tbf

@NuttyBusDriver

Жыл бұрын

@@mastersmods what did you sell it ?

@mastersmods

Жыл бұрын

@@NuttyBusDriver yeah mate over 12 months ago 🤣

@NuttyBusDriver

Жыл бұрын

@@mastersmods Can I ask why you sold it. ?

@mastersmods

Жыл бұрын

@@NuttyBusDriver quickest and easiest answer is the vxr is quicker with the same mods

Fantastic video 👍

@mastersmods

3 жыл бұрын

Thanks dude

Not sure if mentionned, video just popped up in my feed, but crank case ventilation will always go woosh. Most people have it at about 80k km. Mine had it at 60k km. It will almost always break and make a very, very annoying hissing sound and sometimes force your st into safety, low turbo pressure mode.

@mastersmods

3 жыл бұрын

That's good info to know Tim nice one 👍🏼

Like the video, just a side note, you could argue that like your last comment about the driver and if they drive the car hard being the cause of the drive shafts failing is the same for the cylinder walls cracking through driving the car hard all the time 🤷🏼‍♂️

@mastersmods

3 жыл бұрын

My argument to that would be this, my cars original owner from new, drove like an old lady and it wasn't until 142,500 miles that it went. Also if you watch GCM's video on getting his lock mod done, the guy doing it says "it's the ones that are garage queen's that tend to fail the most, the ones that are thrashed about that don't" for me, the liners cracking is a lot more common than drive shafts regardless of how the cars driven. Another way of looking at it would be, when you go look at an ST, what would you ask first - has it been block modded or how many drive shafts you been through? So again, for me anyways, liners trumps drive shafts

@jonmarsh1653

3 жыл бұрын

@@mastersmods yeh fair point I do remember watching gcm’s video now when he got his done now you mention it so I stand corrected 👍 Maybe I’ll thrash mine a bit more to be on the safe side then lol. Mines only done 83000 and still ok with no block mod. Revo stage 1. I did get the revised oil filter housing installed though with a genuine Volvo one. Definitely worth doing.

@mastersmods

3 жыл бұрын

@@jonmarsh1653 I didn't say thrashing it would stop it happening, so don't say it's my fault if it does go 😂 I think these engines are a lottery tbh. My understanding of these engines, even before I bought my car, was it's a luck of the draw because of how they were made. Some had too much taken off the cylinder walls, meaning they'd be more susceptible to fail

i'm about to buy my ex wifes st found you video very informative thanks m8 always said i wouldn't buy her pile of crap but she gave me a deal too good to refuse but after watching your video i don't know if its worth buying it as it already had the bonnet catch problem for the second time.

@mastersmods

3 жыл бұрын

All comes down to price, mods and service history really. If you know the car then it's going to be better than buying from the unknown

Bloody good video that!

@mastersmods

3 жыл бұрын

Thanks 👍🏼

I'd add lacquer peel on EO cars especially. I couldn't find one without it. 🙁

@mastersmods

3 жыл бұрын

Very true that mate. In honesty there's a lot of things I could of added but I didn't want to make the video too long that it just bored people to death 😂

I bought mine with the bonnet fucked. i just pulled the front part off and use a long screwdriver to twist the catch. 3yrs ago that was. 1st fix was steering pipes, i salvaged pipe work 30, 60 to fit with fluid. Then the dodgy front end wabble crept in, i was swapping wheels, banging discs to no evail. with the full service came a drive shaft 380 all in buzzin!! now its the eratic throttling carry on. right pedal unit en route 31 pun used, may try the swap my self 1st.

@mastersmods

2 жыл бұрын

Money pits ain't they

nice one bud.

Ive had my ST 9 years, was totally standard when I got it, the only problem Ive had was the alternator. Ive been running Dreamscience Turbo X+ for 5 years and no problems whatsoever. Although to be fair a lot of the standard stuff has been replaced with uprated stuff

@mastersmods

3 жыл бұрын

Fair play mate, I think every car has their problems over time. If yours has been looked after then will prob treat you well

Been looking after my son's ST for past 6 years and it's doing my head in..its running a stage 2 tune....4 bonnet locks...last one I fitted was like two sliding bars of plastic..works a dream been in 2 years and works great and cheap as chips...2 pairs of wishbones...clutch and DMF and whilst g/box was out pinon and diff fell down inside box... numerous ABS/Traction control faults...wheel bearings...drive shafts the list is endless...still chasing ABS/traction control issues...works fine for a while then comes on again...affects engine mapping...oil pressure gauge stops working and gearbox solenoid kicks in making it difficult to engage 5/6...changed wheel sensors..goes away for a while then back again showing as wheel sensor A...it's doing my head in not being able to locate what is tripping this fault...

@mastersmods

2 жыл бұрын

Could it be a wiring issue?

@richardmessenger9474

2 жыл бұрын

@@mastersmodsthanks for reply...have done the obvious checks of the wiring for damage..connectors cleaned...ect...it's currently on my drive again with burst heater hose which has those stupid plastic twist connectors that go brittle....(am old school whats wrong with a bit of hose and two jubilee clips..😝😝)...when I was tracing the leak underneath found inner CV boot split and whilst removing driveshaft found wishbone ball joint worn..only renewed this 18 moths ago..when stripping the driveshaft found the tripod ball joint is also knackered..it's never ending.....am going to check condition of connector block on abs module for green mould or corrosion same with connectors on ECU to eliminate the obvious...have also brought a pair of front wheel sensors and will change them and see what happens after that..👍👍

@mastersmods

2 жыл бұрын

@@richardmessenger9474 good luck mate, hope you find it and sort it 🙏

@richardmessenger9474

2 жыл бұрын

@@mastersmods many thanks...👍👍Finished drive shaft and lower wishbone today..the Micky mouse heater hose connections are a nightmare to get them to lock in place... fitted a matched pair of front wheel sensors and disconnected the ECU to check condition of connection pins...found about 6 of them at one end covered in some form of brown staining...cleaned it with some carby cleaner and soft nylon brush...cleared fault codes management light now off but traction control and ESP lights still on...a quick road test and lights now off😄😄..vehicle running correctly and fingers crossed it stays that way...only time will tell...👍👍

@mastersmods

2 жыл бұрын

@@richardmessenger9474 that's brilliant news and well done for finding that!

My experience, 12 yrs owner , alternator went first, then wishbones ,oil diaphragm ,2 bonnet catches, 4 springs ,front wheel bearings, original driveshafts and clutch.59,000 miles, no block mod ,its talked about more than going, and last week someone drove in to the side of it and insurance probably going to right it off😒

@mastersmods

3 жыл бұрын

Ah man that sucks 😟 Most of mine were based off of personal experience and what I found in general that people talk about on the fb groups

@razerbaz

3 жыл бұрын

@@mastersmods update car is now being repaired 😎

@mastersmods

3 жыл бұрын

@@razerbaz ah yes love that!

8 years, all standard, was a 2nd hand. 2 turbo repairs Rear wheel bearings CV joints Bonnet catch

@tigershav

3 жыл бұрын

how much did the turbo repairs cost you?

Need a video of map sensor and symptoms lol

@mastersmods

2 жыл бұрын

kzread.info/dash/bejne/qXmbyMecfa7FlMo.html

Got a EML light thats just popped up on the dash no idea what could be the reasoning to it any idea what it could be if anyone knows could you let me know ASAP cheers

@mastersmods

9 ай бұрын

Have you got access to a code reader? Could be anything

Spent around 11 grand on mine and sold it a couple of years ago. Now I'm after another one 🤣

@mastersmods

3 жыл бұрын

11k, ouch. I'd personally hate to sink that much into a build but hey if you got it, spend it cuz you can't take it with you haha

@M_F754

3 жыл бұрын

@@mastersmods That was on the engine. I paid just over 8 for the car. I wish I could track it down to be honest and buy it back. The engine could withstand 1000bhp, I'd love to get it back and do a big turbo on it and put a new gearbox in with uprated bearings and quaife diff. It's nice to dream though eh 😂

My cluster went yesterday 🤣 absolute pain in the arse

@mastersmods

2 жыл бұрын

I feel ya pain pal. Its a nightmare when they go 😭

Had new coils, plugs and new map sensor 2 months ago,cars been running great again , last week was driving home the car started loosing power and cutting out , with a message engine malfunction speed limited mode, completely out of the blue, turned it off waited 2 mins started back up got 100 yards and done the same, you experienced anything like this? No other warning lights or anything seemed to run fine apart from just cutting out

@mastersmods

3 жыл бұрын

Yeah I did. Couldn't accelerate very much and sometimes would just cut out all together. Mine was the dash cluster. The solder dries out in the back of the cluster and doesn't make a solid connection. Try smacking the top of the dash next time it happens. Seems to help for a while if it is the cluster.

@VELCRO666

3 жыл бұрын

@@mastersmods thank you mate really appreciate it

@VELCRO666

3 жыл бұрын

@@mastersmods it was woth my mates garage didn't look at it for a day went completely dead so I'll let him know this too thank you

@mastersmods

3 жыл бұрын

@@VELCRO666 no problem buddy, hope you get it sorted 👍🏼

Do you have the diagram for the boost pipes

@mastersmods

2 жыл бұрын

I don't mate I'm afraid, Google is your best option

Great video my oil filter housing is making a noise on start up then go's away... Dose this cose engine damage?

@mastersmods

3 жыл бұрын

Thank you. It will do if you carry on using the car mate yeah

@djbrad1000

3 жыл бұрын

@@mastersmods glade I watched your video then I double check buy taking oil filter cap off just after start up... Only makes that sound for about 3 mins 👌🎄

@mastersmods

3 жыл бұрын

@@djbrad1000 hmm, might not be the oil filter housing then mate

@djbrad1000

3 жыл бұрын

Yeah it's NOT done some more digging and it's just a belt whinny or something on start up. So all good for now thanks for replys

@mastersmods

3 жыл бұрын

@@djbrad1000 that's good news mate 👌🏼👏🏼

Hi bud my brother is having a problem with is one it is in limp mode and the abs light is on do u know what it could be?

@mastersmods

9 ай бұрын

Is the engine management light on?

@williamfilms4423

9 ай бұрын

@@mastersmods no it is not I don’t think I will check with him when he back

@mastersmods

9 ай бұрын

@williamfilms4423 I'd say it's likely to be a sensor. MAF, MAP or boost solenoid. At the same time, I'm no mechanic lol

Can broken Oil diaphragm broke something else if is faulty? i hear whining noise when idle

@mastersmods

3 жыл бұрын

Pull the dipstick out, if it stops then the diaphragm is torn. If that is the case then you shouldn't be driving the car at all as it can cause more damage to the internals of the engine

@user-gd1mm7gw8k

3 жыл бұрын

i have to try that, i got same whining noise. Thx for info

@gg7335

3 жыл бұрын

@@mastersmods Ok i think its only alternator belt sound.. i take dipstick off and nothing hapens. and i open oil cap and no sound differences, so i think i dont have Oil diaphragm fault. And oil pressure is around 1/2 when warm engine and idling.

@mastersmods

3 жыл бұрын

@@gg7335 should sit between the 1/4 and the 1/2 glad its not the diaphragm tho

I have a question. When i change the throttlebody, do is need new software. Or is it self learning?

@mastersmods

3 жыл бұрын

If upgrading to RS throttle body then I think it does need mapping in

@stylo8133

3 жыл бұрын

@@mastersmods Just wanne change the old one for a new part. I heard that you might need software. But i think it is for the old Volvo 2.5 engines around 2000/2003

@mastersmods

3 жыл бұрын

@@stylo8133 should be fine then mate

@stylo8133

3 жыл бұрын

@@mastersmods thanks

I need help with vac lines

@mastersmods

2 жыл бұрын

What you need help with dude?

Friend I have a problem with the turbo and I think it's the solenoid can you pass me some mail to send you a video for you to see Please

@mastersmods

2 жыл бұрын

I'm on Instagram, link in the description

Who doesn’t wanna give it full beans from low down?? I have those dream science motorsport S9 driveshafts and they’ve been fitted a year n now I’m suddenly getting vibration from the left hand side ffs

@mastersmods

3 жыл бұрын

That's not good is it pal, could it be something simpler like tracking out or tyres?

@davecozzie1

3 жыл бұрын

@@mastersmods no mate.. i have hardrace engine mounts gearbox mount and lower arms aswell n if i just drive steady it doesnt vibrate so much.. its possible but should find out at weekend 1 way or another

@davecozzie1

3 жыл бұрын

@@mastersmods tyres are a month old ps4s

@mastersmods

3 жыл бұрын

@@davecozzie1 defo points towards the shafts then 🙈

@davecozzie1

3 жыл бұрын

@@mastersmods i wished it was tyres 😂😂👍

My number one would be it’s a Ford lol 😂

@mastersmods

3 жыл бұрын

Hahaha yeah should of started with that really shouldn't I 😂

You missed the esp system fault.. that’s the most annoying one

@mastersmods

3 жыл бұрын

Tbh mate I missed a lot off but I only remembered them after I'd posted

Got to be honest I daily my ST on 125k miles I red line every gear everyday no block mod I smash the pants off it pop and bang the shit out of it they are bulletproof in my opinion only problem iv ever had is head lights not auto adjusting and just pointing at the floor, bit of rust on arch that’s it, see so many people crying about a block mod and driveshafts saying their crap...if your un happy with the car sell it and move on. Simples

Had a st remapped biggest bag of shit going so many problems with it I’ll never buy a ford again

@mastersmods

3 жыл бұрын

😂

Crap car thats almost 20 years old and just sounds better than a normal ford focus. The people on the street wont know thats a £7,000 ST theyll think its just another £2,000 focus😂

Ford fucked up the original volvo engine! To be fair the st isnt a proper volvo engine! They went from a 83mm bore to a shit 81mm bore! Why fuck up a good engine ford!