Cobra Ford Modular Oil System - Cobra Tech Talk #4
Автокөліктер мен көлік құралдары
Going through everything from installing billet pump gears, rebuilding a oil cooler, setting pickup height and priming the system.
Don't guess on these important oil components. Watch this and learn some simple tips that can save you a lot of time and money!
Cobra Engineering Oil Primer.
cobraengineering.net/primer.html
Boundary Racing Oil Pumps (and other products).
cobraengineering.net/boundary....
Oil Cooler O-ring sizes:
2mm x 21mm
-223
-232 (2 pieces)
-236
-238
Use Silicone O-rings
00:48 Oil Pump
08:38 Oil Pump Install
11:40 Oil Cooler
19:33 Oil Cooler Install
23:15 Oil Cooler Delete
26:43 Setting Pickup Height
39:07 Oil Primer
40:50 Priming the Engine
Пікірлер: 14
That oil prime tool is a must have! 🔥
Hey James, fantastic video. Thank you for the knowledge!
Really cool video with excellent content James! Great job!!
Definitely interested in that priming piece!
Excellent as always James. The oil prime piece is awesome. From a product standpoint i'd love to see what you could do for a crank support - the J2fab piece has its limitations - I like the MFP versions much better but they've delayed the release for the 03/04 indefinitely it seems. You're the man for the job there I think....
@cobraengineering
2 жыл бұрын
I’ll contact MFP and see if I can pick it up
Very interesting. Didn’t know you sold boundary pumps. I need one of those too. So that pickup tube is the standard for cobra’s? Wonder if I should get one? Mine is from an 03 marauder and the screen is partially covered with a baffle or whatever it’s called. Looks restrictive
@cobraengineering
2 жыл бұрын
I literally just set up a deal with Boundary. I’m pretty sure all the new pickups have the smaller opening. That was a older one I had. Just use tin snips and cut it open.
@canadianmarauder1923
2 жыл бұрын
@@cobraengineering ok thanks for the tip. I will cut the baffle off.
@cobraengineering
2 жыл бұрын
@@canadianmarauder1923 I wouldn’t say cut it off. Just open the oval to a circle.
@canadianmarauder1923
2 жыл бұрын
@@cobraengineering 10/4. Thanks again
Is the RTV recommended?
@cobraengineering
2 жыл бұрын
Just a thin film. While making sure none is in the hole.
@jordanwendell6279
2 жыл бұрын
@@cobraengineering may pull mine back off and put some on there then. Just did it yesterday and didn’t put any on