No video

Co-z gate opener install 8-28-20

Gate opener DIY project. Took about 2 days and simple to set up.

Пікірлер: 20

  • @84848AR
    @84848AR Жыл бұрын

    How do I set the auto close after its been open?

  • @virgilsalazar7479
    @virgilsalazar74793 жыл бұрын

    thank You , I will double check that !

  • @AJG1227
    @AJG12278 ай бұрын

    Is it still working well?

  • @champion18bass51

    @champion18bass51

    8 ай бұрын

    Yes it is still working great! Happy with it.thanks for watching.

  • @melissadavis9527
    @melissadavis9527 Жыл бұрын

    Would like to know about programming the remote.

  • @champion18bass51

    @champion18bass51

    Жыл бұрын

    There is a learn button in the control area, push that then the button on the remote until it's activated.

  • @joseaparicio4943
    @joseaparicio49432 жыл бұрын

    Hi does the back sensor Detect the top or bottom magenet

  • @champion18bass51

    @champion18bass51

    2 жыл бұрын

    Hi thanks for asking great question. In my situation the bottom magnet is the one when the gate is fully closed the top magnet stops the gate when it is fully open.

  • @randallbrown6239
    @randallbrown62393 жыл бұрын

    Do you see any problems developing in an ice and snow area? Winters here in Southern Ohio can get a bit brutal at times.

  • @mattalexander54

    @mattalexander54

    3 жыл бұрын

    I could see how deep snow or ice could affect it, mine has worked great for almost a year best thing I've done.

  • @ferndogg4427
    @ferndogg44273 жыл бұрын

    How do you program visor remotes

  • @mattalexander54

    @mattalexander54

    3 жыл бұрын

    I'm not sure what you mean about visor remotes but there is a learn button on the circuit board that you use on each remote to be programed.

  • @captaingreatvalue3176
    @captaingreatvalue3176 Жыл бұрын

    Hello just bought this unit… can you tell me if the power cable came with the unit and what other tools are needed for installation thank you

  • @champion18bass51

    @champion18bass51

    Жыл бұрын

    No power cable comes with it, you can hook up you own or just hard wire it in. Lots of tools

  • @captaingreatvalue3176

    @captaingreatvalue3176

    Жыл бұрын

    @@champion18bass51 hey thank you I was able to cut a thick extension cord according to a friend of mine who is a master electrician and problem solved my gate was not made for gate openers so a lot of jankyness had to be done to make it work I posted a video of you want to see the results lol 😂

  • @virgilsalazar7479
    @virgilsalazar74793 жыл бұрын

    I installed two motors one in front and back of the hse (100’) synced two remotes to each motor why do both gates work at the same time

  • @mattalexander54

    @mattalexander54

    3 жыл бұрын

    The remotes are on the same frequency.

  • @NDSTraveller
    @NDSTraveller4 жыл бұрын

    But is it rioter proof?

  • @mattalexander54

    @mattalexander54

    4 жыл бұрын

    prob not, but i have other options for that.

  • @NDSTraveller

    @NDSTraveller

    4 жыл бұрын

    @@mattalexander54 You and me both bro... :-)