Thank you, my hang up was the magnets. Your illustration put me at ease. I will complete my installation now.

@HeritageFarmsTexas

3 жыл бұрын

Good luck. I’m happy the video helped you.

Looks great! This was perfect timing for us, we are actually in the market for one of these. Thanks for posting. God bless y’all👍

@HeritageFarmsTexas

4 жыл бұрын

Homestead and Hustle - thanks for watching. Amazon is where we got this one.

Awesome video very helpful, I was debating on purchasing this unit, but after watching this I’m sold. Beautiful place you have!!!

@HeritageFarmsTexas

3 жыл бұрын

Hope it works well for you. You may have to tinker with it to make it work. So far so good on our end. Time will tell.

Nice: I’m going to try it! If so my customers will love it 👍🏽

@HeritageFarmsTexas

3 жыл бұрын

Good luck. So far so good.

Nice, really nice. Looks good, opens up the area around the corporate offices. Coco approves well done.

@HeritageFarmsTexas

4 жыл бұрын

Life Behind A Cow - thanks. We have really enjoyed it so far. Need to finish the conduit now.

Thank you for the video Scott, I just got my in and will try to install it this weekend, still nice weather here in Texas.

@HeritageFarmsTexas

3 ай бұрын

Good luck! We still like ours.

For additional security, you should install a "U" bracket on the pillar so that when the gate is in the closed position, the gate will slide into the U- portion of the bracket . This secures the gate from being lifted off the track (swung in or out like a door on a hinge), which would allow someone to gain access to the property.

@HeritageFarmsTexas

2 жыл бұрын

Yes. It needs one. We thought about it but never got around to installing it.

@isawrichvarga

2 жыл бұрын

excellent point. I hadn't even thought of that

@lissetteperez5999

Жыл бұрын

@@HeritageFarmsTexas love your videos what type of electric cable did u used?

I'll just say besides the awesome tutorial on the gate opener. You have a beautiful place sir. Thanks for sharing!!

@HeritageFarmsTexas

3 жыл бұрын

Thank you. I’m a DIY kind of guy. We have worked hard over twenty plus years to get the “corporate Offices” in shape. I’d hire out big projects and do the finish work myself. Appreciate it.

Thank you from Guatemala this video helped a lot

@HeritageFarmsTexas

Жыл бұрын

Thanks hope it helped out.

Good job on this. I never have I stone of these before but it looks simple to me I’ll be installing one for a friend of mine. He said the previous owner removed the old one so it may have existing electrical. I enjoyed watching the video 😎😎😎

@HeritageFarmsTexas

3 жыл бұрын

Thank you sir. Glad you enjoyed it.

Two things.1. Kimber is getting so big. 2. Good review. You did good on it.

@HeritageFarmsTexas

4 жыл бұрын

Hamiltonville Farm - Thanks Hank. Yes, she is growing daily. I’m so glad this project is almost over. It really transformed the backyard. Still have conduit and final wiring to do. On the downhill slide.

Get the extended warranty when buying these available from Amazon at checkout! I did as 2 years later the motherboard needs replacement. Opener will sometimes work and sometimes not. I have 6 remotes and all gave the same non functioning results, so it wasn't the remotes. Testing of the unit got it working occasionally but only if the remote is no more than 1 feet from the unit. I've been paid already from the insurance and motherboards are available from Aliexpress or Ebay for about 60$. When it was working, it was opening about 8-10x per day and I was able to activate from about 300' away... very happy with the results.

@HeritageFarmsTexas

3 жыл бұрын

Thanks for the advice. Probably a good item to buy insurance on.

Nice setup too! About to install me an automatic slide wooden fence!

@HeritageFarmsTexas

2 жыл бұрын

Good luck. Thanks for watching.

thank you for your advise!

@HeritageFarmsTexas

14 күн бұрын

My pleasure!

Hi from New York and thanks for your video... Good looking!!!!! 👍Now I'm convinced that I can do that installation by my self.... 🤞😎🇺🇸

@HeritageFarmsTexas

4 жыл бұрын

Thanks for watching. It was challenging. Instructions are somewhat limited. Good luck. So far, the unit is working well.

@arthurs7299

4 жыл бұрын

👍😉🇺🇸

This review helped out alot✌

@HeritageFarmsTexas

2 жыл бұрын

Glad you liked it. The gate opener is still working great.

@kaloosh2639

2 жыл бұрын

So well worth the money,special if its still in use,would you possible know the model number or is it written in your video description?✌

Hi there, nice and easy, your way of talking texan its just amazing , viva texan,....the explanation was great , thanks

@HeritageFarmsTexas

4 жыл бұрын

Luis Costa Thanks for watching. Appreciate it.

@luisemanuelalmeidacosta8666

4 жыл бұрын

Good health for you and family , keep positive with great videos, bless you all.

Awesome. It also looks pretty quick. I am in the market for one and didn't want a SLOW one.

@HeritageFarmsTexas

3 жыл бұрын

Thanks for watching. I’m happy with it so far.

Nice. I am working in mybgate now.Thank you for the video

@HeritageFarmsTexas

2 жыл бұрын

Thanks for watching. Good luck on your project.

Gracias por tu video es exactamente lo que necesito 🙏

@HeritageFarmsTexas

2 жыл бұрын

Thanks for watching.

Very nice looking place. That gate will be really nice to have privacy. I like what you did in front of your truck with the garden that sets the whole place off. As far as that gate code.... Ahh.. I think I will check in at the regular hotel hahaha

@HeritageFarmsTexas

4 жыл бұрын

Thanks for watching and we appreciate the feedback. I’m just glad this project is coming to a end. It was more work than I expected.

😮 ohhh thank for I found this video this is the exact gate my husband’s trying to install thanks😮‍💨 …..will be sure to like share and subscribe ☺️✌🏾

@HeritageFarmsTexas

Жыл бұрын

Thanks. Glad it could help out.

I have one of those but have a problem with the gate opening on its own sometimes. Any ideas what could cause the problem ?

Good review, thanks alot bro

@HeritageFarmsTexas

3 жыл бұрын

Appreciate you watching. Hope it was helpful.

What beam sensor did you use and how do you wire it?

Fine job. I bet you could do a great Hank Hill impersonation!

@HeritageFarmsTexas

4 жыл бұрын

Gary Doherty - thanks for watching. 👍

Thanks a Lot

@HeritageFarmsTexas

2 жыл бұрын

Hope it helps. Thanks for watching.

Love automatic gate openers! We have a dual gate swing opener - unfortunately there's a dead relay channel (after 6 years of flawless operation) but I don't have schematics to definitely diagnose the problem. Can't replace it right now. Sigh. Take care and stay safe.

@HeritageFarmsTexas

4 жыл бұрын

Thanks for watching. We love it so far. Hopefully you will get yours working again.

@BrainStormAcres

4 жыл бұрын

Heritage Farms Texas it looks like you have more than enough room for the sliding action! We’re looking forward to how well it works for you.

Hello just bought this unit… can you tell me if the power cable came with the unit and what other tools are needed for installation thank you

Usted a instalado un CO-Z Swing???

How far did you place your motor base from your fence gate? The instructions does not mention any measurements for the placement of the motor with respect to the fence. I am ready to pour the cement pad for the base, but not sure exactly how far I need the motor to be from the fence. Nice video, very informative .

Very good 👍🏻

@HeritageFarmsTexas

Жыл бұрын

Thanks for watching.

Wonderful video!! Can you explain what is the bottom rail on the concrete? Thank you

@HeritageFarmsTexas

4 жыл бұрын

Manuel Lopez - thanks for watching. The bottom rail is literally a rolling gate rail. You can buy them from any fence supply co. You cannot find that at Home Depot or Lowe’s. Has to be a fence co.

Great videos. I bought one of these for a customer. We’re doing a fence and auto gate. Really excited too. Did you have to buy wheels for your gate? Also does it require the concrete pad? No problem if it does because concrete work is my bread n butter. Thanks again for the video and the troubleshooting tips.

@HeritageFarmsTexas

2 жыл бұрын

Hello, thanks for watching. Yes I purchased wheels for the gate and welded them on. I have a gate video guild on my channel. Yes, you need a concrete pad / anchors for motor, lots of torque. Hope that helps.

I made some gate openers when i worked at a fab shop Motor and gear box wss $150 Belt drive over chain for safety the chain is atached to a rolling gates. Someone could just use a garage door opener to open ea gate with rollers No sensors need

@HeritageFarmsTexas

3 жыл бұрын

Thanks for watching. Appreciate the comments. 👍

@ipwee

3 жыл бұрын

I made my gate opener out of a chamberlain garage door motor and old bicycle parts for the gears. It has been in service for 26 years. It's getting a little tired so I ordered one of the co-z openers. Hopefully, it lasts as long as my frankenopener.

@garybrown9719

3 жыл бұрын

@@ipwee nice ingenuity

@ipwee

3 жыл бұрын

@@garybrown9719 TY Truth is, I'm cheap and back then the gate openers were north of a thousand bucks.

Thanks for the video. My Co-Z gate opener has been working for 4 years, all of the sudden, it only works in one direction. We opened the motor box, manually moved a switch up and down, we can make the gate work one direction, but not the other direction. By moving the switch down, it reverses the direction the gate opens/closes. Something is off. We now pulled open the key/lock handle, disengage the automation and open/close the gate manually. Have you had such experience?

@HeritageFarmsTexas

11 күн бұрын

No I haven’t. I’d check to see if both of your magnets are aligned. Good luck. That’s a good run.

another great video but, how do you adjust/ turn on the automatic close feature?

@HeritageFarmsTexas

4 ай бұрын

Thanks. I think there is a switch on the board for either 30 or 45 second intervals.

your video are great well explain i am looking a remote antenna to work with this product so i can get a far range to operate remote

@HeritageFarmsTexas

3 жыл бұрын

Sorry, I have no recommendation On a remote antenna.

Hi, you mentioned you have it hardwired now. Have you done anything in the event of a power outage and you are on the other side of the fence and cannot get to the manual release?

@HeritageFarmsTexas

10 ай бұрын

Good question. We also have a walk through gate. In the event of power outage, we can walk though side gate, then manually open the slider. Thanks for watching.

Is that Hank from king of the hill narrating there?? Awesome job!

@HeritageFarmsTexas

2 жыл бұрын

Haha, I’ll take that as a compliment. Appreciate you watching.

Hi Guys,Can I have the measurement from the motor plastic cover to the farthest end of the middle sprocket bearing?

Where did you buy the metal gate? Having a hard time making sure the hardware will work with the gate. Thank you!

@HeritageFarmsTexas

3 жыл бұрын

Hello, we made the gate by welding two fence panels together. We have another video that shows us building the gate. Hope that helps. Thanks for watching.

How did you do the extension cord trick?

@HeritageFarmsTexas

Жыл бұрын

Hello, that was just a temporary test. It’s hard wired now.

They could have designed this much cleaner and simpler if they had had magnets that you could clamp on the chain itself, with the open/close sensors mounted inline with the chain.

@HeritageFarmsTexas

8 ай бұрын

Thanks for watching.

I purchased two of these same Co-z machines. I too have a problem with the infrared sensor working backwards. I too have my gate set up just like yours. The instructions does say how to run the chain on center sprocket. My question was..... Did you switch the direction of the gate switch on the CPU Board along with the direction of the chain on main sprocket or was the only change made was the sprocket deal? I’m getting ready to install the open gate opener today. Thanks. Good video by the way! Adrian,

@HeritageFarmsTexas

3 жыл бұрын

Thanks for watching. My only change was to the sprocket. Good luck.

@frankperuchini2123

2 жыл бұрын

You have to wire it in a normally open state not normal closed

How do you pair another remote to it

@HeritageFarmsTexas

9 ай бұрын

You can program multiple remotes. Just have to hit pair button on control panel. Not bad at all. Good luck.

Does it come with all components for complete installation if sensor adjustment is not required

@HeritageFarmsTexas

3 жыл бұрын

You only get the motor unit.

Hello. Where did you find the ground guide ?

@HeritageFarmsTexas

3 жыл бұрын

You should be able to get them from any fence supply company. I think they’re called sliding gate track.

Where do i connect th ir sensor, red, blue, green and white wires to, my gate is not motion

@HeritageFarmsTexas

Жыл бұрын

Hello, I’m not sure. I’m not an expert. I just kept doing trial and error until I figured it out. Good luck.

I bought this same unit, It did not come with the safety sensor, any ideas!

@HeritageFarmsTexas

3 жыл бұрын

Hello, check out my other video on the “Enforcer” gate sensor install. Thanks.

Hi Where do we can buy that sensor that detect that a person walking by.

@HeritageFarmsTexas

3 жыл бұрын

Vhamper to bumper Emerson Hello, Amazon. Thanks for watching

I couldn't make to work this motor, just opened 3' and stop, can you help me?

@HeritageFarmsTexas

11 ай бұрын

Thanks for watching. Sorry, I’m no expert. Just a home owner. I would check your magnet brackets to make sure they’re aligned. That was my biggest issue. Good luck.

Hey wat was the brand and model.of the safety switch...heard u mention "Enforcer"

@HeritageFarmsTexas

2 жыл бұрын

Hello, it was the enforcer brand. I have a video posted just on the sensor and there is a I tire of the box I. That video. Thanks for watching !

Does this come with motion sensors? I have kids and don’t want it to close on them. Does it have a retraction meaning if the gate accidentally hits something it will open back up? Thanks

@HeritageFarmsTexas

4 жыл бұрын

Kevin T - hello, thanks for watching. The opener does not come with any sensors. You have to buy one separately. There is no retraction from “Touch”. The way this one works is just like a garage door, once the beam is broke, the gate opens and stops. Hope that helps.

Hi i have question how i can installing the sensor

@HeritageFarmsTexas

2 жыл бұрын

Hello, I’m not a professional installer. I just installed mine. What is your question?

Hi, Very grateful for you. What is the fair installation cost in the suburd? Thank you

@HeritageFarmsTexas

2 жыл бұрын

Hello, thanks for watching. Not sure as I’m a DIY kind of guy.

How does the gate stay upright? Thank you

@HeritageFarmsTexas

2 жыл бұрын

Hello, I have other videos on my channel that show how we built the gate and rollers. Check them out. Thanks for watching.

Is this machine still working for you after one year of use? How's it holding up?

@HeritageFarmsTexas

3 жыл бұрын

So far so good. I’m shocked, but has worked flawlessly. Good luck.

Good Video. There is no customer service at CO Z. You have to figure out yourself. I would like to see troubleshooting video on youtube.

@HeritageFarmsTexas

3 жыл бұрын

I agree, the info is very limited. It was very frustrating for me to figure it out. Once I did, it’s been OK. They’re terrible for support.

The orange cord works just fine until you hit it with the lawnmower a few times, lol. I like the price and as you found out, you buy cheap and from China, they almost never give you good directions. Great review.

@HeritageFarmsTexas

4 жыл бұрын

Just Mike - thanks for watching. Yes the extension cord is temporary until I could prove to myself I could make it work and all the trouble shooting is finished. Now that it is performing well, I will start running conduit and do the final electrical work.

@justmike57

4 жыл бұрын

@@HeritageFarmsTexas You have a wonderful looking place there. I guess I was thinking of myself, so many things I want to get done, but good enough for now and run to the next project. you have a great day there in Texas.

@HeritageFarmsTexas

4 жыл бұрын

Appreciate the feedback. I can totally understand. My wife is asking me daily about that orange cord. Haha.

I feel your pain... No instructions. Ours won't shut off closing driving me crazy trying to figure it out.

@HeritageFarmsTexas

3 жыл бұрын

It was frustrating for sure. Once we figured it out, it’s been great so far. Thanks for watching.

the motor in my co z seems to get stuck, only turns a little bit, is it broken or is this something to be configured?

@HeritageFarmsTexas

3 жыл бұрын

Alberto Mendoza - hello, I’m really not sure. Sorry. I’ve had no issues with mine so far.

@sdironworks

11 ай бұрын

I have same problem, just open 3'.

What about the track to slide de gate

@HeritageFarmsTexas

2 жыл бұрын

Hello, thanks for watching. I’m not sure I understand your question. What bout the tracks? They’re called gate tracks and are available from fence supply companies. You cannot buy them at Home Depot or Lowe’s. Hope that answered your question.

Did you have to cut the power cord to make it work, thats how my installer did, i was little upset installer didn't use the regular electric wires cable for the power

@HeritageFarmsTexas

3 жыл бұрын

Hello, thanks for watching. I’m not sure what cord you are referring to. We hard wired ours using standard romax and placed it in conduit. Hope that helps.

@ferndogg4427

3 жыл бұрын

@@HeritageFarmsTexas ok looks like an regular orange extension cord

@HeritageFarmsTexas

3 жыл бұрын

Hello, When we first installed it, we did use an extension cord. After we got it working, we hard wired it. Thanks.

Can you provide me what safety sensor you use?

@HeritageFarmsTexas

3 жыл бұрын

Hello , it’s listed In The video. We also have a separate video on The sensor. Check out our video playlist. Thanks.

Great video sir but your limit magnetic are not right is the reason you had to put the chain over the sprocket instead of under the sprocket the correct way. In the closed position the magnetic goes on top and in the open position magnetic on bottom.

@HeritageFarmsTexas

2 жыл бұрын

Thanks for watching.

Can you program this gate opener with you car homelink?

@HeritageFarmsTexas

3 жыл бұрын

Hello, I do not believe so. There was nothing in their directions. It does operate like a garage remote though. I may play around and try that. Good idea.

Can you use a wooden fence with this gate Opener?

@HeritageFarmsTexas

3 жыл бұрын

Hello, yes it should work with several types of gates. In theory. Depends on width, weight,etc.

Which one is better. Pinion or chain? Can we add a board for smartphone?

@HeritageFarmsTexas

3 жыл бұрын

Hello, I’m a fan of the chain. As far as adding a smart phone, I have no clue. Sorry.

Hi Scott, Is this compatible with HomeLink?

@HeritageFarmsTexas

2 ай бұрын

Hello, not sure. We were not able to make it work. But that could just be use. We just keep key fob in car. Works fine.

what kind of power cord do you use and how long is it? Thank you

@HeritageFarmsTexas

Жыл бұрын

Hello, it is hard wired.

@tuanvucohan.9901

Жыл бұрын

Thank you

Please can the board be reset

@HeritageFarmsTexas

3 күн бұрын

I’m not sure how to do that. Can you just disconnect/reconnect the power?

Is it safe? Can someone open the gate without the remote and release key?

@HeritageFarmsTexas

Жыл бұрын

Hello, define safe. It’s pretty safe, but if someone wants in, they can ram the gate and knock it off the track. It’s more of a deterrent than anything.

How’s the gate opener working ?

@HeritageFarmsTexas

3 жыл бұрын

Hello, we are about an year in and it’s been great. I’d highly recommend again. Especially for the money.

Looks good is it still operating ?

@HeritageFarmsTexas

3 жыл бұрын

Hello, Yes we have had it for over 6 months now and so far so good. Time will tell. Thanks for watching.

Does it auto closed?

@HeritageFarmsTexas

7 ай бұрын

Yes. After 15 or 30 seconds. Depending on what you select.

Can you add a pad lock ?

@HeritageFarmsTexas

Жыл бұрын

Hello, I’m sure you could. Thanks for watching.

Why not try solar panel?

@HeritageFarmsTexas

2 жыл бұрын

Thanks for watching. Solar would be a great option for a remote location. We have power close by, so we went with standard electricity. Good question.

Does it still work perfectly after almost 4 years?

@HeritageFarmsTexas

3 ай бұрын

Yes it does. I would have never thought it. But it does. I’ve had to replace a key fob, but all in all it works. Keep in mind my gate is fairly light and rolls extremely easy. I think a heavy gate would tax it.

@matteovettorato8401

3 ай бұрын

@@HeritageFarmsTexas Look, my gate weighs approximately 250/300kg so it shouldn't have any problems

hey Question what kind of wheels did you go with?

@HeritageFarmsTexas

3 жыл бұрын

Hello, they came from a fence supply co. They’re designed to roll on that track. They’re very heavy. Not sure if a brand name. Sorry.

@joshriddle4797

3 жыл бұрын

@@HeritageFarmsTexas i did not know if they where steel or like brass

@HeritageFarmsTexas

3 жыл бұрын

They’re steel. Very heavy. However, they’re not rusting. Wonder if they have a coating on them? Definitely not stainless or brass.

remote can program 4 diff things - like what ?

@HeritageFarmsTexas

2 жыл бұрын

I’m assuming garage doors. Other gates?

Hey i install one of the this gate open but it didn't come with a timer for automatic closing does the retro reflective sensor have a timing system with it

@HeritageFarmsTexas

3 жыл бұрын

I think the opener has a timer built in to close after 30, 45 or 60 seconds. It’s one of the slide switches on the panel. Your owners manual should show it. Good luck.

Just the control board for my gto sl2000 is $300

@HeritageFarmsTexas

2 жыл бұрын

Thanks for watching. Appreciate it.

Where is your company i can t find a way to talk to CO-Z/

@HeritageFarmsTexas

3 жыл бұрын

Hello, I don’t have a co. I’m a individual who installed this unit at my house.

Mine stop working within a year

@HeritageFarmsTexas

3 жыл бұрын

Hello Kay, sorry about that. I’m going on year #2. If it would last two or three years, I’d be happy. We will see. Sorry yours didn’t last that long.

i know my buddy has a lift master paid 1700 thats just crazy eagle is a little more cheaper at 1200 then you have these china made but lets face it most of the name brands are made in china anyways so i am going back and forth between eagle and something like this my money is tightning up tho

@HeritageFarmsTexas

3 жыл бұрын

I’m 9 months in and so far so good.

Could keep the Dogs out of it ??

@HeritageFarmsTexas

Жыл бұрын

Thanks for watching.

YOU'LL BE LUCKY IF YOU GET 2 MONTHS OUT OF THAT GATE OPENER..

@HeritageFarmsTexas

4 жыл бұрын

Well, we are at the two month mark. So far so good. I agree with you, it’s not a long term unit. If it last 2 years I’ll be shocked. Thanks for watching.

Get what you pay for

@HeritageFarmsTexas

3 жыл бұрын

So far, it’s all good. Knock on wood. Thanks for watching.

Buy American..ought to be ashamed of yourself.

@HeritageFarmsTexas

2 жыл бұрын

I’m smiling all the way to the bank. Thanks for watching.