this has been one of the smartest moves i've seen good job

just had the same idea today, really cleaver way of doing it. Great work kudos

And I have to say this this is brilliant. If you could streamline this into an easy to install kit at an affordable price, you would be basically a sole provider for a much sought after and highly useful product. I cant think that anyone with a hobby cnc wouldn't want one of these. I know I would and I'm only just starting with a cnc router

@RapidChangeATC

Жыл бұрын

I have actually done what your looking for check it out on my channel you can get my e-mail from the about spot on my channel if your interested in knowing more also I will be putting out a new video soon

@Max-tj7bp

5 ай бұрын

This has been done by rapidchangeatc

I need one! Thanks fo a nice video.

Very great job!!😊

interessting that the spindle has enough torque to tighten that nut i tought of a system that engages some sort of geared motor / impact driver on the back since the aircooled spindles have a shaft that goes trough

Bardzo dobre rozwiazanie. Bedzie zastosowane w moich frezarkach. Zauważylem że należy dać ogranicznik miedzy frezem a tulejką, gdyż bez tego frez może wchodzić głebiej.

@bogas78

8 ай бұрын

masz moze wiecej informacji o tym rozwiazaniu bo tylko dwa filmy sa na youtube a zero jakichs informacji jest to gdzies na jakiejs stronie moze opisane ?

most brilliant way, thank you so much for sharing this with us ❤

Brilliant!

Yes, I love it

Brilliant! Simple design and yet so effective! Did you ever measure with a torque wrench the Nm by reopening it manually?

Cool!

Love it

Hello friend, that tool change system works for a CNC workbee 1515 xpro v5

Great ❤.. what is this things that have springs and screw or unscrew the spindle

Nice! I will try an iteration. Looks quite promising. An affordable alternative. Spindle does the work in forward and reverse. Now I have to upgrade my grbl controller. Maybe someone has figured this out for grbl as well.

@bukunmioyedapo45

8 ай бұрын

Fluidnc can and also if you can write the gcode, you can run that without a tool change command option.

@pg9112471

8 ай бұрын

@@bukunmioyedapo45 sweet! Like a macro... yes, of course! Thanks for the tip.

Genius system. Any more update videos coming up?

What program are you using on your CNC Router? your job is very nice 👍👍👍.

Nice job! but I am curious as to why you haven't taken this further..?? I just put out a video using a similar principle and just found your video so I'm curious thanks

Thank you very much for showing your ATC. It is a fantastic idea. How do you get the Probe to run after the Change? Thanks for sharing.

@pascaljean2333

Жыл бұрын

It is a basic gcode edit. You can find many tutorials online

This looks interesting and a cheap way to change tools. How reliable is it? What happens when the tool gets stuck when trying to release it?

it very very creazy !!! good good good ..en francais/quebecois : c'est vraiment calicement malade ton asti de truc de fou !

@cirilazenko3212

3 жыл бұрын

Easy and very useful.

Как сказал михаил трафимович калашников. все гениальное просто. сделать сложно лего сделать легко сложно. Отличный вариант огромное спасибо.

@groottree3923

5 ай бұрын

хуйня полная этот вариант.

Hi Cirila, i discovered this evening your atc video..very interesting...does it work under GRBL and how do you know if spindle 's is closed ? thank's a lot philip

Hola tiene a la venta su proyecto?

Hello really very interesting and it seems to work very well is it possible to have the plans dxf and or solidwoks and the code for mach3 please thank you very much 👍👍👍👍👍

Had this idea a couple of year ago for my PCB-mill, always assumed the torque would be to low. There's something similar, more refined called Rapidchange. He seems to be using the inertia of the motor spinning to up the tightening torque. The rest seems about the same. I will probably do something similar for my PrintNC. Thanks for the vid, great work.

@AntiVaganza

4 ай бұрын

Keep in mind, Rapidchange did not exist when this video was uploaded...;). Still, they seem to want to patent it. Not sure how they can do that when there's prior art out there. Unless it's their retention mechanism only as they mentioned he had to figure out a different way than "just" using a hex seat like here.

This is really cool! Is that spring loaded? How does it work?

@i_make_thing

4 ай бұрын

I could be wrong on this but the springs are to help with thread engagement. The spring pushes the collet into the spindle and sorta sucks it in. This can (probably) help against stripped threads.

Does it works if I don't have reverse spindle?

top sua troca automatica de fresa MAGAZINE

This is really slick. How do you ensure the end mills stay in the endmills? Do you only use endmills with of the larger diameter with a tight fit in the collet? For instance 6mm shaft on a 5-6 collet.

@cirilazenko3212

Жыл бұрын

I use all kinds of endmills, from 1mm in up. End collet from 1mm in up. Even tools for engraving .... Never had any serius problems.

@TheRainHarvester

Жыл бұрын

​@@cirilazenko3212 How does it work?

@ray-charc3131

10 ай бұрын

Bigger ones are heavier and will slip out from collets

Amazing, Please share the Post Processor file

Hello, could you give me more information regarding the tool change please?

Hi i love the work is there a way we could replicate this ? I would love to install one on my machine!

How did you make that

can you please send me the dxf for your assembley i want to try your idea

Can you please send me the 3d drawing if you do t mind? This is really nice one for my hobby CNC work.

How are you getting enough torque on the collet so the endmill doesn't pull itself out?

@gizmoguyar

7 ай бұрын

From the looks of it. The cuts he's taking are so extremely light, it's probably not putting much force on the tool.

@manifesto.c

6 ай бұрын

Shhh... let him think he is an engineer

@BryanHoward

6 ай бұрын

I’m sure he quickly found out cutting anything thicker and the bit will pull right out. I got a video on my channel cutting 1/4” polycarbonate and it pulled right out after making some tiny holes. Thought I had it torqued down enough. @@manifesto.c

@manifesto.c

6 ай бұрын

@@BryanHoward hope he found it out not on 24k rpm... would be sad

@BryanHoward

6 ай бұрын

Regardless, anyone that has written gcode and the mechanical to do stuff like this knows how challenging it is. Congrats on getting it this far. Stepping up to an ATC will be easy.

Ste pripravljeni izdelati set za prodajo ?

HI! Very cool idea! Can you share files and code to do it please ?!

como que foi feito esse suporte ?

bel sistema ai la possibilita di mettere i file per la costruzione per un futuro?saluti sarebbe bello vedere altri video

Amigo voce teria algum desenho com as medidas ?

Can you tell me how you control the indexing of the collet nut?

@crimpers5543

6 ай бұрын

No

please can you help me my system dsp a11 i hope you do that thank you

fantastic, exactly what i had in mind, Cirila, do you have any drawing as i would like to add this to my CNC?

Hey, maby u use linuxcnc ?

Hi can you share files to do it please and instructions for cncjs or the software you use

@cirilazenko3212

Жыл бұрын

Send me mail. bojan.dolgan@siol.net

a geniale ou je peut trouver ce systeme de changement outil ?

Can you share new video, and what is your cnc controller?

@cirilazenko3212

Жыл бұрын

What in the particular do you want to see ? Mach 3 and most common board connected by parallel port with computer.

Are you using a basic vfd and spindle?

@cirilazenko3212

Жыл бұрын

yes.

Wow really cool. Can you share code to do it ?

@crimpers5543

6 ай бұрын

No

You are going to need a how to video

take my money

Please share more infos

@cirilazenko3212

Жыл бұрын

What kind of information do you wont ?

How do you ensure it doesn't cross thread?

@pascaljean2333

Жыл бұрын

I think the system must be calibrated to be exactly perpendicular to the spindle

Was anyone successful in getting in touch with the guy ? I tried emailing him a couple of times on the email he posted here but never got a reply

how can i get that

A brilliant idea !!! Congratulations. I would like to implement the system in my CNC. Would it be possible for you to send me the mechanical plans and the g-code of the project for the macro by mail? I work on Mach3. Do you need any financial contribution for this matter? Thank you so much.😊

Teach me!

@cirilazenko3212

2 жыл бұрын

Hi. What kind of information you wont ?

is this publicly available?

Nice project, it's a non ATC spindle?

@cirilazenko3212

Жыл бұрын

No, this is normal 1,2 KW spindle

@pascaljean2333

Жыл бұрын

Yes

How did you make this?

@cirilazenko3212

2 жыл бұрын

Hi , It is look wery easy but i lost a lotof time and make many experiments.....

hello $ plans and script tankyou

I do not understand how you ensure the collet is properly tightened 🤯

@cirilazenko3212

Жыл бұрын

It dipends on speed of spindle in the specific operation. You can determinate very acuratly.

Can you post the code used to get it to work?

@cirilazenko3212

Жыл бұрын

Send me mail. bojan.dolgan@siol.net

@DjalilDjalilll

10 ай бұрын

Hello, thank you for your efforts, can you send me the code please?

what is your controller? how did you code it?

@cirilazenko3212

Жыл бұрын

Mach 3.

@cirilazenko3212

Жыл бұрын

You have to made macro for more in formation you can send me mail: bojan .dolgan@siol.net

@cirilazenko3212

Жыл бұрын

Sory: bojan.dolgan@siol.net

Good evening. Where can I see the details of your invention? A very interesting option and I would like to repeat it!

hello $ plans and script 😎

@cirilazenko3212

9 ай бұрын

Hi could you please send me mail: bojan.dolgan@siol.net

It is brillant !!

эта штука не работает. цанга всегда должна быть больше по диаметру, чем фреза. фреза не удержится в цанге, нужен упор. и момента шпинделя недостаточен для затяжки гайки. момент у шпинделя от 0,3 до 3 Нм, а момент затяжки гайки er20 75Нм.

🤣🤣🤣

Don't know how to fix the right torque.

What's the point of this video if there is zero information about this?

The spindle rotation is very large. Someday he won't get to the beginning of the carving and will have a bite.

hello, i'm a person who watched your project "ATC cheap spindle" on youtube, i live in vietnam i am very impressed with what you have created, can you share with me the G-code that do you use it to operate, it will help with my difficulties and i sent you an email. Once again I would like to thank you for your dedication to the CNC community.