Hello really very interesting and it seems to work very well is it possible to have the plans dxf and or solidwoks and the code for mach3 please thank you very much 👍👍👍👍👍
@mastertashkent4 ай бұрын
🤣🤣🤣
@marceloalessandro13594 ай бұрын
top sua troca automatica de fresa MAGAZINE
@dronesvisionsaeriennes5 ай бұрын
Hi Cirila, i discovered this evening your atc video..very interesting...does it work under GRBL and how do you know if spindle 's is closed ? thank's a lot philip
@giravik5 ай бұрын
The spindle rotation is very large. Someday he won't get to the beginning of the carving and will have a bite.
@TheTecnicamente5 ай бұрын
Was anyone successful in getting in touch with the guy ? I tried emailing him a couple of times on the email he posted here but never got a reply
@Bart_Depestele5 ай бұрын
Yes, I love it
@groottree39236 ай бұрын
эта штука не работает. цанга всегда должна быть больше по диаметру, чем фреза. фреза не удержится в цанге, нужен упор. и момента шпинделя недостаточен для затяжки гайки. момент у шпинделя от 0,3 до 3 Нм, а момент затяжки гайки er20 75Нм.
@danielkainz21446 ай бұрын
Brilliant! Simple design and yet so effective! Did you ever measure with a torque wrench the Nm by reopening it manually?
@davidduparquet52946 ай бұрын
a geniale ou je peut trouver ce systeme de changement outil ?
@user-hf4ju3bn4d6 ай бұрын
Как сказал михаил трафимович калашников. все гениальное просто. сделать сложно лего сделать легко сложно. Отличный вариант огромное спасибо.
@groottree39236 ай бұрын
хуйня полная этот вариант.
@crimpers55437 ай бұрын
take my money
@n00ki7 ай бұрын
Had this idea a couple of year ago for my PCB-mill, always assumed the torque would be to low. There's something similar, more refined called Rapidchange. He seems to be using the inertia of the motor spinning to up the tightening torque. The rest seems about the same. I will probably do something similar for my PrintNC. Thanks for the vid, great work.
@AntiVaganza4 ай бұрын
Keep in mind, Rapidchange did not exist when this video was uploaded...;). Still, they seem to want to patent it. Not sure how they can do that when there's prior art out there. Unless it's their retention mechanism only as they mentioned he had to figure out a different way than "just" using a hex seat like here.
@TheTecnicamente7 ай бұрын
Hi i love the work is there a way we could replicate this ? I would love to install one on my machine!
@massimobellisardi82577 ай бұрын
bel sistema ai la possibilita di mettere i file per la costruzione per un futuro?saluti sarebbe bello vedere altri video
@berkakarcaloglu19157 ай бұрын
just had the same idea today, really cleaver way of doing it. Great work kudos
@rx3dr8787 ай бұрын
Good evening. Where can I see the details of your invention? A very interesting option and I would like to repeat it!
@Totem95198 ай бұрын
What's the point of this video if there is zero information about this?
@RenatoYamamoto4818 ай бұрын
is this publicly available?
@BryanHoward8 ай бұрын
How are you getting enough torque on the collet so the endmill doesn't pull itself out?
@gizmoguyar7 ай бұрын
From the looks of it. The cuts he's taking are so extremely light, it's probably not putting much force on the tool.
@manifesto.c6 ай бұрын
Shhh... let him think he is an engineer
@BryanHoward6 ай бұрын
I’m sure he quickly found out cutting anything thicker and the bit will pull right out. I got a video on my channel cutting 1/4” polycarbonate and it pulled right out after making some tiny holes. Thought I had it torqued down enough. @@manifesto.c
@manifesto.c6 ай бұрын
@@BryanHoward hope he found it out not on 24k rpm... would be sad
@BryanHoward6 ай бұрын
Regardless, anyone that has written gcode and the mechanical to do stuff like this knows how challenging it is. Congrats on getting it this far. Stepping up to an ATC will be easy.
@carlitossierras38088 ай бұрын
Hello friend, that tool change system works for a CNC workbee 1515 xpro v5
@lukaszj78498 ай бұрын
Bardzo dobre rozwiazanie. Bedzie zastosowane w moich frezarkach. Zauważylem że należy dać ogranicznik miedzy frezem a tulejką, gdyż bez tego frez może wchodzić głebiej.
@bogas788 ай бұрын
masz moze wiecej informacji o tym rozwiazaniu bo tylko dwa filmy sa na youtube a zero jakichs informacji jest to gdzies na jakiejs stronie moze opisane ?
@antoninbocan66729 ай бұрын
Hello, could you give me more information regarding the tool change please?
Nice! I will try an iteration. Looks quite promising. An affordable alternative. Spindle does the work in forward and reverse. Now I have to upgrade my grbl controller. Maybe someone has figured this out for grbl as well.
@bukunmioyedapo458 ай бұрын
Fluidnc can and also if you can write the gcode, you can run that without a tool change command option.
@pg91124718 ай бұрын
@@bukunmioyedapo45 sweet! Like a macro... yes, of course! Thanks for the tip.
@davidkal908311 ай бұрын
HI! Very cool idea! Can you share files and code to do it please ?!
@finchere363211 ай бұрын
Great ❤.. what is this things that have springs and screw or unscrew the spindle
@phuongtoantangoc819111 ай бұрын
hello, i'm a person who watched your project "ATC cheap spindle" on youtube, i live in vietnam i am very impressed with what you have created, can you share with me the G-code that do you use it to operate, it will help with my difficulties and i sent you an email. Once again I would like to thank you for your dedication to the CNC community.
@motoka231 Жыл бұрын
como que foi feito esse suporte ?
@JuanCarlosCastro-se4nx Жыл бұрын
Very great job!!😊
@guapetelnen Жыл бұрын
A brilliant idea !!! Congratulations. I would like to implement the system in my CNC. Would it be possible for you to send me the mechanical plans and the g-code of the project for the macro by mail? I work on Mach3. Do you need any financial contribution for this matter? Thank you so much.😊
@Louloulepoux35 Жыл бұрын
It is brillant !!
@procalcosmx1142 Жыл бұрын
Hola tiene a la venta su proyecto?
@lightbody232 Жыл бұрын
most brilliant way, thank you so much for sharing this with us ❤
@lgrfbs Жыл бұрын
I need one! Thanks fo a nice video.
@LibertyWarrior68 Жыл бұрын
This looks interesting and a cheap way to change tools. How reliable is it? What happens when the tool gets stuck when trying to release it?
@gamerpaddy Жыл бұрын
interessting that the spindle has enough torque to tighten that nut i tought of a system that engages some sort of geared motor / impact driver on the back since the aircooled spindles have a shaft that goes trough
@kenf2662 Жыл бұрын
You are going to need a how to video
@aeknarintomDIY Жыл бұрын
Wow really cool. Can you share code to do it ?
@crimpers55437 ай бұрын
No
@ManushaWijekoon Жыл бұрын
Can you please send me the 3d drawing if you do t mind? This is really nice one for my hobby CNC work.
@elderlopescosta449 Жыл бұрын
What program are you using on your CNC Router? your job is very nice 👍👍👍.
@RapidChangeATC Жыл бұрын
Nice job! but I am curious as to why you haven't taken this further..?? I just put out a video using a similar principle and just found your video so I'm curious thanks
Пікірлер
Hey, maby u use linuxcnc ?
how can i get that
How did you make that
Love it
hello $ plans and script tankyou
Does it works if I don't have reverse spindle?
Hello really very interesting and it seems to work very well is it possible to have the plans dxf and or solidwoks and the code for mach3 please thank you very much 👍👍👍👍👍
🤣🤣🤣
top sua troca automatica de fresa MAGAZINE
Hi Cirila, i discovered this evening your atc video..very interesting...does it work under GRBL and how do you know if spindle 's is closed ? thank's a lot philip
The spindle rotation is very large. Someday he won't get to the beginning of the carving and will have a bite.
Was anyone successful in getting in touch with the guy ? I tried emailing him a couple of times on the email he posted here but never got a reply
Yes, I love it
эта штука не работает. цанга всегда должна быть больше по диаметру, чем фреза. фреза не удержится в цанге, нужен упор. и момента шпинделя недостаточен для затяжки гайки. момент у шпинделя от 0,3 до 3 Нм, а момент затяжки гайки er20 75Нм.
Brilliant! Simple design and yet so effective! Did you ever measure with a torque wrench the Nm by reopening it manually?
a geniale ou je peut trouver ce systeme de changement outil ?
Как сказал михаил трафимович калашников. все гениальное просто. сделать сложно лего сделать легко сложно. Отличный вариант огромное спасибо.
хуйня полная этот вариант.
take my money
Had this idea a couple of year ago for my PCB-mill, always assumed the torque would be to low. There's something similar, more refined called Rapidchange. He seems to be using the inertia of the motor spinning to up the tightening torque. The rest seems about the same. I will probably do something similar for my PrintNC. Thanks for the vid, great work.
Keep in mind, Rapidchange did not exist when this video was uploaded...;). Still, they seem to want to patent it. Not sure how they can do that when there's prior art out there. Unless it's their retention mechanism only as they mentioned he had to figure out a different way than "just" using a hex seat like here.
Hi i love the work is there a way we could replicate this ? I would love to install one on my machine!
bel sistema ai la possibilita di mettere i file per la costruzione per un futuro?saluti sarebbe bello vedere altri video
just had the same idea today, really cleaver way of doing it. Great work kudos
Good evening. Where can I see the details of your invention? A very interesting option and I would like to repeat it!
What's the point of this video if there is zero information about this?
is this publicly available?
How are you getting enough torque on the collet so the endmill doesn't pull itself out?
From the looks of it. The cuts he's taking are so extremely light, it's probably not putting much force on the tool.
Shhh... let him think he is an engineer
I’m sure he quickly found out cutting anything thicker and the bit will pull right out. I got a video on my channel cutting 1/4” polycarbonate and it pulled right out after making some tiny holes. Thought I had it torqued down enough. @@manifesto.c
@@BryanHoward hope he found it out not on 24k rpm... would be sad
Regardless, anyone that has written gcode and the mechanical to do stuff like this knows how challenging it is. Congrats on getting it this far. Stepping up to an ATC will be easy.
Hello friend, that tool change system works for a CNC workbee 1515 xpro v5
Bardzo dobre rozwiazanie. Bedzie zastosowane w moich frezarkach. Zauważylem że należy dać ogranicznik miedzy frezem a tulejką, gdyż bez tego frez może wchodzić głebiej.
masz moze wiecej informacji o tym rozwiazaniu bo tylko dwa filmy sa na youtube a zero jakichs informacji jest to gdzies na jakiejs stronie moze opisane ?
Hello, could you give me more information regarding the tool change please?
Amigo voce teria algum desenho com as medidas ?
Don't know how to fix the right torque.
hello $ plans and script 😎
Hi could you please send me mail: [email protected]
Nice! I will try an iteration. Looks quite promising. An affordable alternative. Spindle does the work in forward and reverse. Now I have to upgrade my grbl controller. Maybe someone has figured this out for grbl as well.
Fluidnc can and also if you can write the gcode, you can run that without a tool change command option.
@@bukunmioyedapo45 sweet! Like a macro... yes, of course! Thanks for the tip.
HI! Very cool idea! Can you share files and code to do it please ?!
Great ❤.. what is this things that have springs and screw or unscrew the spindle
hello, i'm a person who watched your project "ATC cheap spindle" on youtube, i live in vietnam i am very impressed with what you have created, can you share with me the G-code that do you use it to operate, it will help with my difficulties and i sent you an email. Once again I would like to thank you for your dedication to the CNC community.
como que foi feito esse suporte ?
Very great job!!😊
A brilliant idea !!! Congratulations. I would like to implement the system in my CNC. Would it be possible for you to send me the mechanical plans and the g-code of the project for the macro by mail? I work on Mach3. Do you need any financial contribution for this matter? Thank you so much.😊
It is brillant !!
Hola tiene a la venta su proyecto?
most brilliant way, thank you so much for sharing this with us ❤
I need one! Thanks fo a nice video.
This looks interesting and a cheap way to change tools. How reliable is it? What happens when the tool gets stuck when trying to release it?
interessting that the spindle has enough torque to tighten that nut i tought of a system that engages some sort of geared motor / impact driver on the back since the aircooled spindles have a shaft that goes trough
You are going to need a how to video
Wow really cool. Can you share code to do it ?
No
Can you please send me the 3d drawing if you do t mind? This is really nice one for my hobby CNC work.
What program are you using on your CNC Router? your job is very nice 👍👍👍.
Nice job! but I am curious as to why you haven't taken this further..?? I just put out a video using a similar principle and just found your video so I'm curious thanks