Wow ive learnt more in 1 video than anyone has ever tried to teach me. Very text book and very informative. Thank you!!

@ACDodd

2 ай бұрын

Excellent, watch the rest of these it will teach you a lot more

Good to see plenty of youngsters taking an interest

Loved the demo day last year, must have watched you tune about 4 minis, so educational

Thank you for sharing your expertise. Your videos are excellent.

great info . always educational to watch you videos.

Very interesting stuck jet can't wait for next video

@ACDodd

2 ай бұрын

It’s actually quite common

Wish there was a ❤ button not just a like 👌🤟

Are you trying to get hello fresh to sponsor you, great video as always look forward to the rest

@ACDodd

2 ай бұрын

No, definitely not, just a complete conincidence

Adrian do you stock stickers ? Would like one for mine when i get my mini tuned at mini medic event . Cheers

@ACDodd

2 ай бұрын

Yes

very interesting video their on the coil and if fitted with the right one runs better and better spark through the rev range cheers

Is there a way to check the dwell on an electronic dizzy without that meter? I’m running an electronic ignition with a 3ohm accuspark coil. But my low end power is rubbish. I quite often have the blip the throttle several times to bring the revs up before I pull away.

@ACDodd

2 ай бұрын

Poor low end power is usually associated with too much cam timing and too high a rocker ratio for your needs. What can and rocker combination are you using?

@Hagrid123

2 ай бұрын

⁠thanks! The cam and rocker are original. It’s always had poor low end power. I’m currently trying to get it going again after a rebuild. It’s firing at 10°BTDC (with no vac advance) and I’ve reset the carb by winding it until the jet is level with the bridge and then winding it out two whole turns (12 flats) and I’m struggling to keep it running.

@ACDodd

2 ай бұрын

@@Hagrid123your engine simply needs a thourough tune as shown in these 4 videos.

@Hagrid123

2 ай бұрын

Thanks again. I’ve only got a colour tune to sort the mixture. Will that give me good enough results for now?

@ACDodd

2 ай бұрын

@@Hagrid123 install a wideband gauge then you know exactly what is going on all of the time