My girlfriends car would flash the high beams when the indicators cancelled. Eventually the indicators stopped working altogether. The headlights themselves were then on constantly and wouldn't turn off and the window wipers stopped working. We bought a replacement light switch stalk for £24 and I replaced it thanks to this video. Problem solved, thanks. So please note that the wiring on the left stalk can also cause issues with the wipers on the right stalk!
@terrystewart84944 жыл бұрын
Front wipers were not working. Knew it was not motor or fuse. Followed this vid for the wiper stalk and cleaned the tracks with meths and a quick rub with 0000 grade wire wool. All fixed and £130 saved to spend in the pub once the lockdown is over!
@davecrooks2609 Жыл бұрын
Thanks for a well done video. I found that releasing the wiper stalk (not removing!) makes access to the white plug a bit easier. The bottom half of the cover can be removed for better access but the top half has wires attached Take photos all the way so reassembly is easier.
@rbrbr261Ай бұрын
Thank you. Perfect video allowed me to get my main beam from nothing to 100% working again.
@tim-64935 ай бұрын
Thanks for the video! I had some issue’s, the headlight switch, the fog light switch and my wipers didn’t work. In my case, one of the wires inside the stalk was broken. With a needle i was able to get it out of the plug and i managed to get a fresh piece of wire into the plug. Everyrhing is working now!
@hmabarros19893 жыл бұрын
Hello there. I'm from Portugal and I have a renault modus with the same problem. I did the same steps that you maked and it works!! Thanks a lot for the video
@Grcbyte
3 жыл бұрын
Boa, eu fiquei com o problema hoje de ligar o pisca e aceder os médios ao mesmo tempo.. num Clio3, mas vim ver só como se abre e tira o manípulo!
@paulinemccarthy15393 ай бұрын
You just saved me 200 euros for a new dimmer. My 07 Clio has exactly the same problem and I follow you and now it’s perfect ❤👍
@quofb9 ай бұрын
Legend. Thank you. Warning to anyone buying replacement parts off ebay - there is a green connector version and a white connector version - they are not interchangeable! Flipping the little roller around and cleaning it all up did the job - here's hoping it goes another 16 years
@dw8477 Жыл бұрын
Useful thanks and also lead me to fix a wiper issue I would not have thought was linked. Wipers would only work when activating the washer jets, no function of any normal rain speeds. Then the light switch became very temperamental, sticking on or off etc. The link was the red wire loom linking the light stalk to the wipers where there was a broken wire. Bought a non gen one of ebay for £22 (Renault was £177!) and fixed both issues.
@stelfc538410 ай бұрын
Nice one you helped me sort my heads lights out,,,, an your calm voice helped me alot lol 👍🏻👍🏻
@CarlosFandango73 Жыл бұрын
Thanks for this. We bought a replacement brand new stalk for £30 but off the back of you describing the problem. Thanks so much. 👍
@robert7951310 ай бұрын
This video is awesome. Everything is working perfectly after this fix. Thanks.
@Super.YT_ Жыл бұрын
Big thank you mate. I bought a second hand stalk and needed to know how to fit it. Thank you so much.
@cortijocaballo2 жыл бұрын
Nice one mate. Worked a treat and lights back to normal!
@WaynesMundo2 жыл бұрын
Thanks man! This made changing it really easy on my 2006 MK3 Clio.
@zigajager5184 жыл бұрын
Thank you soooo very much Sir... This video has helped me a lot and saved me about 100 euros... I did exactly as you did and now switch works perfectly!! Thanks again :)
@mirdza10513 жыл бұрын
Thank you for saving my money :) It s really not hard to do it, just listen step by step!
@dixonj.g.3998 Жыл бұрын
Hi there, I just wanna say thank you Mr John, I've found this video superb, truly useful, so I've fixed a serious lights problem after watching it! Thanks mate. Blessings!
@mickp42814 жыл бұрын
Thanks John. I've been persauded to have a go myself now :)
@Alan-jl3jh2 жыл бұрын
Thanks so much for taking the time to post this. You just save me quite a bit of work.. :-)
@w0ode1982 жыл бұрын
Hi there!, I just wanted to pop by and say thank you very much for this video. I did exactly what you stated and it also fixed my issue. I was lucky as I had proper contact cleaner spray from farnell here in my lab so I used that instead of the IPA. I decided to give everything a clean where it was mechanically switching.
@kulic123454 жыл бұрын
Professional video.I solved problem thanks to you
@chauho35833 жыл бұрын
Very helpful video, you can run the connector wheel on the sandpaper few minutes.
@davecrooks2609 Жыл бұрын
Just finished servicing the switch but the cause of malfunction turnsout to be 1 of 10 wires broken at the switch plug. I gut the plug end to reveal the clip and soldered the wire to the exposed clip. High magnification was required! Assembled on the car and all working. I've ordered a new switch to replace the repaired unit which will be backup.
@johnmathias9892
Жыл бұрын
The quality of the electrics on the stalks is outstandingly poor. Renault should be ashamed of themselves!
@zorandimitrievski943 жыл бұрын
Excellent video. Thanks
@deatharmy36844 жыл бұрын
Thanks a lot. Flasher works again. 😍
@zoltandamo77853 жыл бұрын
Hey! It works finally! Thx for the vid! 🍻😊
@user-ih5lb6ik4v Жыл бұрын
Давно искал такой ролик, спасибо !
@killagorilla86352 жыл бұрын
Good job u deserve a like and more subs 👌🏾💯
@kevinroche612611 ай бұрын
Thank you so much, worked perfectly
@TheLuckydan922 жыл бұрын
dipped beams not working, replaced the lightbulbs, useless, all others are fine, changed relay and checked all fuses.I also did as you in the video. Still when i start engine, position lights came on but dipped beams not. Every time i reconnect batttery, autolight activates by its own. What can it be?
@JamesRobinson1975 Жыл бұрын
Thanks very much for sharing.
@rjamsbury13 жыл бұрын
I have a load of issues on my Kangoo stalks so will be having a go at disassembly and clean up. I'll let you know how it goes!
@johnmathias9892
3 жыл бұрын
Check the loom between the two stalks for broken wires at the plug ends. Ebay list new replacement stalks pretty cheap now.
@rjamsbury1
3 жыл бұрын
@@johnmathias9892 thanks 👍
@rjamsbury1
3 жыл бұрын
Well colour me amazed! I've only gone and done it! 😁👍🙏 I had issues on both stalk pods so took both out and dissembled them. My 2009 Kangoo didn't have rollers just spring contacts and I gently prised them out a bit. Just as I was doing the last one, I noticed the loom that connects both pods had three broken wires on the indicator end 😳 My eyes struggle to see stuff that small but I put on two pairs of glasses (really!) and could see the ends were just pushed into scissor grips. So I picked out the old ends, pressed the wires back in, re-assembled and everything works! Hallelujah, can't say how happy I am and grateful for your video.
@predictionandtips2 жыл бұрын
I have problem here ..When I put indicator on the lights turn on...ok I havw this problem over a year nothing wrong happend till today some smoke coming out form the back of my stering whell but on the wiper stalk side ...any idee what can be the problem,m
@mykeltifreeland3 жыл бұрын
Bro, you just saved me £400!!!
@seanesslemont6332
3 жыл бұрын
£400?
@millwallfan06 Жыл бұрын
Hi could you do a video on how to repair and prevent the small red wires on the loom that connect to the green connector from falling out and causing all kinds of problems, that would be amazing. But thanks for this video too I learnt how to take the stalk apart
@alexanders64433 жыл бұрын
Danke für Video
@user-rr6di3de7m Жыл бұрын
what about indicator right is not connected well.
@anonymous-dk1is3 жыл бұрын
In my case it was only one little (thin) red cable shortened a bit and pinned again to connector.. on left side lights/flasher showed 10:00 (10th min) - wipers and lights fault (no fault flashing)
@jda18953 жыл бұрын
Any ideas on the name of the connector where I can get hold of a new one? 4 of the wires have disconnected and I don't have access to a soldering iron
@demosintheuk9526
3 жыл бұрын
Go on ebay and search for Clio MK3 stalk. Some of them comes with the connector wire
@Norfirion04 жыл бұрын
I had the same problem and i fixed it thanks to you, but fornsome reason my hornnand comands on the steering wheel stoped working and all the plugs are conected, if u know how to fix that reply me.
@johnmathias9892
4 жыл бұрын
Check the wiring loom between the two stalks for breaks at the plug ends. You will have to resolder with a fine pointed soldering iron and fluxed fine wire solder.
@djmaxy705
3 жыл бұрын
Did you fix it. I went to a scrapyard and picked up a new stalk all worked fine until i realised my horn does not work anymore. Should i just give the old one a clean and pit it back in?
@millwallfan06 Жыл бұрын
Also if reconnecting these small wires do I need to expose metal when conexcting or will they go in with coating
@johnmathias9892
Жыл бұрын
You need to solder it back on to the connector from memory
@rks017_mk23 жыл бұрын
My full beam was difficult to turn, always just flashing instead of actually staying on. Recently it’s given up completely, reckon it’s the same issue and this will work?
@tompajus1034
3 жыл бұрын
I have the same problem right now. Have you tried this method?
@rks017_mk2
3 жыл бұрын
@@tompajus1034 replaced the entire thing for like a tenner from eBay tbh, if I was going to the effort of cleaning it all might as well just replace it with a new part for that price. Super easy to do though
@kenl1068Ай бұрын
2006 Clio, Headlights don't come on when steering wheel is straight, when you turn left the left headlight comes on, when you turn right the right headlight comes on, do you think this fix would sort it or would there be another problem?
@johnmathias9892
23 күн бұрын
Well there is a feature that turns on an additional light in the headlamp cluster when you turn a corner in the Clio I had.
@kenl1068
23 күн бұрын
Car is stationary, not sure if it's the switch or something else?
@kaiserrule4 жыл бұрын
One troublesome car, doing my head in. Fuse box relay burnt out smfh!!
@nathanevans1553Ай бұрын
Hi. Do you know the name of the red connector wires that you disconnected at the start??
@demosintheuk9526
Ай бұрын
Not sure they are called sorry. There is another video someone else did after me that shows the initial disassembly in more detail.
@demosintheuk9526
Ай бұрын
kzread.info/dash/bejne/gmV42aNmlZDYh9Y.html
@nathanevans1553
Ай бұрын
Ok thanks anyway 👍🏻
@curtismercer30354 жыл бұрын
My windscreen wipers won’t turn off?!! Will this be the same?
@johnmathias9892
4 жыл бұрын
I am not sure but inspect for fault in the wiper stalk or wiring between the two. I couldn't find a relay that controls the wipers but there is a control box behind the glove compartment that might affect the wiper operation as well as the central locking.
@PersonWithYouTubeAccount
4 жыл бұрын
Did you find a fix to the wiper problem? I currently have this problem too
@curtismercer3035
4 жыл бұрын
Joel F. No mate, I’m going to get the full stick from a scrap yard and see if that does the trick, just an easy plug in and unplug job I think 🧐
@PersonWithYouTubeAccount
4 жыл бұрын
Ha think I will do the same. I tried another wiper motor and have the same issues so it's definitely the stalk or wiring
@andreaspersson282
4 жыл бұрын
the wiring was the problem on my car, those little tiny wires was snapped of. i Think about 3 of them was broken bit could be soldered back on
@williamstarr82934 жыл бұрын
Hi genuine request I don't trust myself doing this where abouts are you? Would you consider doing this for me if I travel to you and pay you depending on where you are?
@daytona1212 Жыл бұрын
Why would there be grease on the contacts at 4:37?
@johnmathias9892
Жыл бұрын
Good question. Apparently it is dielectric grease which protects the contacts. see kzread.info/dash/bejne/rJyglcSFqsrXaaQ.html
@daytona1212
Жыл бұрын
@@johnmathias9892 Ah, might be, thanks. But why only on one of the contacts? I wonder if there's also grease on that contact, in a brand new unit. It would suprise me if that's the case. Maybe I can find another video about cleaning this unit.
@daytona1212
Жыл бұрын
@@johnmathias9892 I just watched another repair video, and it looks like there's grease on that contact too, so problem solved. 😁
Пікірлер: 78
My girlfriends car would flash the high beams when the indicators cancelled. Eventually the indicators stopped working altogether. The headlights themselves were then on constantly and wouldn't turn off and the window wipers stopped working. We bought a replacement light switch stalk for £24 and I replaced it thanks to this video. Problem solved, thanks. So please note that the wiring on the left stalk can also cause issues with the wipers on the right stalk!
Front wipers were not working. Knew it was not motor or fuse. Followed this vid for the wiper stalk and cleaned the tracks with meths and a quick rub with 0000 grade wire wool. All fixed and £130 saved to spend in the pub once the lockdown is over!
Thanks for a well done video. I found that releasing the wiper stalk (not removing!) makes access to the white plug a bit easier. The bottom half of the cover can be removed for better access but the top half has wires attached Take photos all the way so reassembly is easier.
Thank you. Perfect video allowed me to get my main beam from nothing to 100% working again.
Thanks for the video! I had some issue’s, the headlight switch, the fog light switch and my wipers didn’t work. In my case, one of the wires inside the stalk was broken. With a needle i was able to get it out of the plug and i managed to get a fresh piece of wire into the plug. Everyrhing is working now!
Hello there. I'm from Portugal and I have a renault modus with the same problem. I did the same steps that you maked and it works!! Thanks a lot for the video
@Grcbyte
3 жыл бұрын
Boa, eu fiquei com o problema hoje de ligar o pisca e aceder os médios ao mesmo tempo.. num Clio3, mas vim ver só como se abre e tira o manípulo!
You just saved me 200 euros for a new dimmer. My 07 Clio has exactly the same problem and I follow you and now it’s perfect ❤👍
Legend. Thank you. Warning to anyone buying replacement parts off ebay - there is a green connector version and a white connector version - they are not interchangeable! Flipping the little roller around and cleaning it all up did the job - here's hoping it goes another 16 years
Useful thanks and also lead me to fix a wiper issue I would not have thought was linked. Wipers would only work when activating the washer jets, no function of any normal rain speeds. Then the light switch became very temperamental, sticking on or off etc. The link was the red wire loom linking the light stalk to the wipers where there was a broken wire. Bought a non gen one of ebay for £22 (Renault was £177!) and fixed both issues.
Nice one you helped me sort my heads lights out,,,, an your calm voice helped me alot lol 👍🏻👍🏻
Thanks for this. We bought a replacement brand new stalk for £30 but off the back of you describing the problem. Thanks so much. 👍
This video is awesome. Everything is working perfectly after this fix. Thanks.
Big thank you mate. I bought a second hand stalk and needed to know how to fit it. Thank you so much.
Nice one mate. Worked a treat and lights back to normal!
Thanks man! This made changing it really easy on my 2006 MK3 Clio.
Thank you soooo very much Sir... This video has helped me a lot and saved me about 100 euros... I did exactly as you did and now switch works perfectly!! Thanks again :)
Thank you for saving my money :) It s really not hard to do it, just listen step by step!
Hi there, I just wanna say thank you Mr John, I've found this video superb, truly useful, so I've fixed a serious lights problem after watching it! Thanks mate. Blessings!
Thanks John. I've been persauded to have a go myself now :)
Thanks so much for taking the time to post this. You just save me quite a bit of work.. :-)
Hi there!, I just wanted to pop by and say thank you very much for this video. I did exactly what you stated and it also fixed my issue. I was lucky as I had proper contact cleaner spray from farnell here in my lab so I used that instead of the IPA. I decided to give everything a clean where it was mechanically switching.
Professional video.I solved problem thanks to you
Very helpful video, you can run the connector wheel on the sandpaper few minutes.
Just finished servicing the switch but the cause of malfunction turnsout to be 1 of 10 wires broken at the switch plug. I gut the plug end to reveal the clip and soldered the wire to the exposed clip. High magnification was required! Assembled on the car and all working. I've ordered a new switch to replace the repaired unit which will be backup.
@johnmathias9892
Жыл бұрын
The quality of the electrics on the stalks is outstandingly poor. Renault should be ashamed of themselves!
Excellent video. Thanks
Thanks a lot. Flasher works again. 😍
Hey! It works finally! Thx for the vid! 🍻😊
Давно искал такой ролик, спасибо !
Good job u deserve a like and more subs 👌🏾💯
Thank you so much, worked perfectly
dipped beams not working, replaced the lightbulbs, useless, all others are fine, changed relay and checked all fuses.I also did as you in the video. Still when i start engine, position lights came on but dipped beams not. Every time i reconnect batttery, autolight activates by its own. What can it be?
Thanks very much for sharing.
I have a load of issues on my Kangoo stalks so will be having a go at disassembly and clean up. I'll let you know how it goes!
@johnmathias9892
3 жыл бұрын
Check the loom between the two stalks for broken wires at the plug ends. Ebay list new replacement stalks pretty cheap now.
@rjamsbury1
3 жыл бұрын
@@johnmathias9892 thanks 👍
@rjamsbury1
3 жыл бұрын
Well colour me amazed! I've only gone and done it! 😁👍🙏 I had issues on both stalk pods so took both out and dissembled them. My 2009 Kangoo didn't have rollers just spring contacts and I gently prised them out a bit. Just as I was doing the last one, I noticed the loom that connects both pods had three broken wires on the indicator end 😳 My eyes struggle to see stuff that small but I put on two pairs of glasses (really!) and could see the ends were just pushed into scissor grips. So I picked out the old ends, pressed the wires back in, re-assembled and everything works! Hallelujah, can't say how happy I am and grateful for your video.
I have problem here ..When I put indicator on the lights turn on...ok I havw this problem over a year nothing wrong happend till today some smoke coming out form the back of my stering whell but on the wiper stalk side ...any idee what can be the problem,m
Bro, you just saved me £400!!!
@seanesslemont6332
3 жыл бұрын
£400?
Hi could you do a video on how to repair and prevent the small red wires on the loom that connect to the green connector from falling out and causing all kinds of problems, that would be amazing. But thanks for this video too I learnt how to take the stalk apart
Danke für Video
what about indicator right is not connected well.
In my case it was only one little (thin) red cable shortened a bit and pinned again to connector.. on left side lights/flasher showed 10:00 (10th min) - wipers and lights fault (no fault flashing)
Any ideas on the name of the connector where I can get hold of a new one? 4 of the wires have disconnected and I don't have access to a soldering iron
@demosintheuk9526
3 жыл бұрын
Go on ebay and search for Clio MK3 stalk. Some of them comes with the connector wire
I had the same problem and i fixed it thanks to you, but fornsome reason my hornnand comands on the steering wheel stoped working and all the plugs are conected, if u know how to fix that reply me.
@johnmathias9892
4 жыл бұрын
Check the wiring loom between the two stalks for breaks at the plug ends. You will have to resolder with a fine pointed soldering iron and fluxed fine wire solder.
@djmaxy705
3 жыл бұрын
Did you fix it. I went to a scrapyard and picked up a new stalk all worked fine until i realised my horn does not work anymore. Should i just give the old one a clean and pit it back in?
Also if reconnecting these small wires do I need to expose metal when conexcting or will they go in with coating
@johnmathias9892
Жыл бұрын
You need to solder it back on to the connector from memory
My full beam was difficult to turn, always just flashing instead of actually staying on. Recently it’s given up completely, reckon it’s the same issue and this will work?
@tompajus1034
3 жыл бұрын
I have the same problem right now. Have you tried this method?
@rks017_mk2
3 жыл бұрын
@@tompajus1034 replaced the entire thing for like a tenner from eBay tbh, if I was going to the effort of cleaning it all might as well just replace it with a new part for that price. Super easy to do though
2006 Clio, Headlights don't come on when steering wheel is straight, when you turn left the left headlight comes on, when you turn right the right headlight comes on, do you think this fix would sort it or would there be another problem?
@johnmathias9892
23 күн бұрын
Well there is a feature that turns on an additional light in the headlamp cluster when you turn a corner in the Clio I had.
@kenl1068
23 күн бұрын
Car is stationary, not sure if it's the switch or something else?
One troublesome car, doing my head in. Fuse box relay burnt out smfh!!
Hi. Do you know the name of the red connector wires that you disconnected at the start??
@demosintheuk9526
Ай бұрын
Not sure they are called sorry. There is another video someone else did after me that shows the initial disassembly in more detail.
@demosintheuk9526
Ай бұрын
kzread.info/dash/bejne/gmV42aNmlZDYh9Y.html
@nathanevans1553
Ай бұрын
Ok thanks anyway 👍🏻
My windscreen wipers won’t turn off?!! Will this be the same?
@johnmathias9892
4 жыл бұрын
I am not sure but inspect for fault in the wiper stalk or wiring between the two. I couldn't find a relay that controls the wipers but there is a control box behind the glove compartment that might affect the wiper operation as well as the central locking.
@PersonWithYouTubeAccount
4 жыл бұрын
Did you find a fix to the wiper problem? I currently have this problem too
@curtismercer3035
4 жыл бұрын
Joel F. No mate, I’m going to get the full stick from a scrap yard and see if that does the trick, just an easy plug in and unplug job I think 🧐
@PersonWithYouTubeAccount
4 жыл бұрын
Ha think I will do the same. I tried another wiper motor and have the same issues so it's definitely the stalk or wiring
@andreaspersson282
4 жыл бұрын
the wiring was the problem on my car, those little tiny wires was snapped of. i Think about 3 of them was broken bit could be soldered back on
Hi genuine request I don't trust myself doing this where abouts are you? Would you consider doing this for me if I travel to you and pay you depending on where you are?
Why would there be grease on the contacts at 4:37?
@johnmathias9892
Жыл бұрын
Good question. Apparently it is dielectric grease which protects the contacts. see kzread.info/dash/bejne/rJyglcSFqsrXaaQ.html
@daytona1212
Жыл бұрын
@@johnmathias9892 Ah, might be, thanks. But why only on one of the contacts? I wonder if there's also grease on that contact, in a brand new unit. It would suprise me if that's the case. Maybe I can find another video about cleaning this unit.
@daytona1212
Жыл бұрын
@@johnmathias9892 I just watched another repair video, and it looks like there's grease on that contact too, so problem solved. 😁
well i never the proclaimers drive a clio
Just buy one from a scap yard
Thanks very much for sharing.