Cleaning the Pellet Stove - ComfortBuilt HP22N
Тәжірибелік нұсқаулар және стиль
My previous video showing the feature of this stove can be found here:
• Comfort Bilt HP22-N Pe...
In this video, I show how to clean the ComfortBilt HP22N Pellet Stove. I perform this process every 4-5 days during the heating season.
We selected the HP22-N model since it will heat up to 2500 square feet and has a larger hopper and will hold up to 80 pounds of pellets. This means we can go much longer operational time and more days before needing to fill it.
Here is a link to the stove we purchased.
Comfortbilt HP22-N Pellet Stove
amzn.to/485R7LY
PowerSmith PAVC101 10 Amp Ash Vacuum
amzn.to/4a6WFra
Filtrete Air Purifier/HEPA Filter:
amzn.to/3RXQZYl
Disclaimer: The links above are affiliate links. This means that if you click on these links and make a purchase, I will receive a small commission from the vendor. There is no price increase when using this option! These small commissions help to keep my channel running and producing similar videos. Usage of these links is greatly appreciated.
Пікірлер: 7
One way to get a lot of pellet dust is to buy from a vendor who does not properly store the pellets, because when the pellets get damp, they break down into pellet dust. I had this problem with some Home Depot and Tractor Supply pellets. Hardwood pellets do not seem to be readily available here in Northern AZ.
Nice job. Very informative. I just installed the same stove last night. I like your magnet idea on the side panels.
@jimginnyohio
4 ай бұрын
Thank you. I’m sure you’ll love it!
I had no idea it was so technically operated how much electricity does it take to start and run.
@jimginnyohio
5 ай бұрын
Yes, the Comfortbilt folks really put a lot of engineering into the stove to insure it is efficient and safe to operate. It uses 520 watts when igniting. Otherwise, the normal operating power usage is only 150 watts.
Have you messed with the feed rate settings at all?levels 1-5. if so, could you post them here? thanks
@jimginnyohio
4 ай бұрын
Hello. Sorry, but I haven't messed with the feed rate settings at all. My stove has been set at the default setting since the initial installation. Since things seem to be working fine as they are, I didn't want to mess something up by changing that. If you learn anything about that, I would love to hear though! Thanks!