Cleaning or Replacing the Front ABS Wheel Speed Sensor - Peugeot 307
Автокөліктер мен көлік құралдары
How to remove, clean and replace the front ABS sensor (wheel speed sensor) on a 2001 to 2008 Peugeot 307. The replacement part number is 9652310580. NOTE: If you're only cleaning the ABS sensor there's no need to remove the wheel arch liner. Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🛠️ Front ABS Wheel Sensor ~ amzn.to/3wev850
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.co.uk
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.
Пікірлер: 55
Just bought an 18 year old 307. Never imagined I would find such great videos for a car this old an cheap! Keep up the good work man.
@screwsnutsandbolts
3 жыл бұрын
Thanks, will do! :)
@michaelfawcett7843
2 жыл бұрын
yes these car are good to work on at home
Exactly what I was looking for :)
High level of showing what to do and filming it. Congrats 😊
@screwsnutsandbolts
10 ай бұрын
Thank you !
Excellent video; really well produced. Thanks!
@screwsnutsandbolts
Жыл бұрын
Thank you !
Excellent well shown and explained 👍
@screwsnutsandbolts
2 жыл бұрын
Thank you !
Good job, thanks 👍👍
@screwsnutsandbolts
3 жыл бұрын
No problem 👍
Great Vid thanks a lot...hope was so easy to do the same in my C5
@screwsnutsandbolts
Жыл бұрын
No problem 👍
Many thanks master, my warning abs/esp light just came up. I presume it's dirty.
@screwsnutsandbolts
3 жыл бұрын
It's one of the possible causes
@toxmaster1
3 жыл бұрын
You should check with some diagnostic tool what error is in memory. Recently have same abs/esp error sometimes, diag tool shows problem with rear right wheel sensor.Removed, cleaned sensor and magnetic ring on bearing, spray sensor connector with contact spray and no more esp error.
@michaelfawcett7843
2 жыл бұрын
BUD CHAINGE them they cost £11.00 on eBay
Good video
@screwsnutsandbolts
3 жыл бұрын
Thanks
Hello there. In my Peugeot 307 Bva automatic transmission vehicle, I am getting an error in the speed information from the abs. The gear goes into malfunction mode. Is abs sensor cleaning enough? what else can I do. thanks
You may use air flow sensor cleaner.
all the way through i was screaming brake disc wear - i couldnt possibly have put the wheel back on without doing a brake service after seeing those discs!!!😱
@screwsnutsandbolts
Жыл бұрын
The video was only focused on the the sensor and the steps needed to replace it.
@jase171973
8 ай бұрын
You should see mine. As long as the mot guy doesn’t flag it then they are good. Manual states min thickness.
Hi , I changed the tires and now is making a noise when i break and the ABS light turn on. Are'you guess something alse happned when the guy changed the tires?
@screwsnutsandbolts
2 жыл бұрын
It's possible, but I'm not sure what could be causing the noise. I would take it back to the guy who changed your tires and explain the problem
Is the half-shaft ring on the bearing located? Is it available as a replacement part?
@screwsnutsandbolts
10 ай бұрын
This video might help you: kzread.info/dash/bejne/hqiC1qaelrqyfdo.html
just one thing my friend are the rear abs sensor s the same , but one bolt s upper part of sensor and other bottom part of sensor
@screwsnutsandbolts
2 жыл бұрын
The front and rear sensors are not identical but they are replaced in a similar way
@michaelfawcett7843
2 жыл бұрын
@@screwsnutsandbolts thank you bud
i change sensor but still nothing changed on speedometer!!could it be fuse in fusebox because i see that there is fuse of 10A which are for speedometer
@screwsnutsandbolts
Жыл бұрын
This is not a speedometer sensor. This is a wheel speed sensor for the ABS braking system
@Mr11ESSE111
Жыл бұрын
@@screwsnutsandbolts hmm,i ask some mechanics and they sayed it is related with speedometer sensor for models from 2006-09 and newer got under engine speedometer sensor
@Mr11ESSE111
Жыл бұрын
@@screwsnutsandbolts they cheat me then, i was thinking same as you but they see my number of chasis and say ed its not speedometer sensor under engine then this on wheels !! i will see tomoroow under car
@screwsnutsandbolts
Жыл бұрын
Good luck !
@Mr11ESSE111
Жыл бұрын
@@screwsnutsandbolts i will need it,i see thst fuse can be problem too and tgere is fuse for speedometer too
is it on same place speed sensor on Peugeot 207 too?
@screwsnutsandbolts
2 жыл бұрын
I'm not sure, sorry
@Mr11ESSE111
2 жыл бұрын
@@screwsnutsandbolts i ask some mechanics and seems that older 207 2006 -09 have on the wheels sensor while redesign 09-12 have under engine
@screwsnutsandbolts
2 жыл бұрын
Thanks for the info
@Mr11ESSE111
2 жыл бұрын
@@screwsnutsandbolts i must check on mine 207 is that is true on tire /wheel to see is it so or not because i have same problem with no speedometer working
How many ABS sensors are the car in total?
@screwsnutsandbolts
2 жыл бұрын
I think there's two at the front and two at the rear
Ima li neko. Iskustva sa Pežo 206 HDI 2000 kub 2001 godište sa kilometar satom neradi jedno kilometar pa proradi sta li je riknulo❓
@salihsabanovic6161
Жыл бұрын
Jesil riješio brt
so plug are hidden behind plastic arch
@screwsnutsandbolts
Жыл бұрын
Yes they are
@Mr11ESSE111
Жыл бұрын
@@screwsnutsandbolts i hope it is same for 207
Only dam issue here is thd Gap I find
@philipmaguire9209
2 жыл бұрын
Gap sensor is set 2mm... perfect as soon as you take it off .. abs light triggers have to get dam 2mm right ✅
No need whatsoever to remove the liner. Access the plug is factored in to its design.