This was the second time using the harbor freight concrete mixer and this time we got some Lemi-shine to test. Does the Lemi-shine really make a difference, you be the judge...
Жүктеу.....
Пікірлер: 29
@garygiannini5945 Жыл бұрын
Now that's a tumbler! I have so much brass I see a concrete mixer in the near future!!
@GeorgiaTrappingandFishing2 жыл бұрын
Boy that’s a load of brass! That worked really well 🙂👍👍
@johnshandloading7907 Жыл бұрын
Tread, I don't know how I never saw this before today. What an awesome video!
@Tread70
Жыл бұрын
Thanks John
@Pappy70648 ай бұрын
I can't believe I watched 4 minutes of rinsing brass.
@jcm45905 жыл бұрын
Now that's the way to do it👍 Willie Bulletman sent me.
@WV591 Жыл бұрын
I like the fact it is so benchtop portable, ;-) Good job
@Tread70
Жыл бұрын
Great for the benchtop 😁
@duanepayne180511 ай бұрын
Go easy on the Lemi-Shine and don't leave them in water with the lemi-Shine overnight or it will discolor the cases.
@FilthyAngryIrishPeasant Жыл бұрын
KILLER. Maybe using a very powerful (not destuctive) to the still soing brass in an ultrasonic cleaner might bust up the really dirty cases. Brass is out of sight now.
@saltsea94997 ай бұрын
What are you using as your screen? That looks sturdy.
@Tread70
7 ай бұрын
I believe my Dad made it out of expanded metal.
@Jean-sc1bw6 ай бұрын
Wet cleaning without decapping is not the way to go. In a short time, primer will corrode in the casing. Resizing will just blow the primer bottom - scrapping the case.
@Tread70
6 ай бұрын
If you think that....
@breannestahlman595311 ай бұрын
Super idea! Leni shine ? ? ? Not my country, what is it, what is the composition? Green liquid is hand dishwashing I suppose?
@Tread70
11 ай бұрын
Dish soap and citric acid powder(lemishine) minimal on the citric acid like 1/2 teaspoon for this large load.
@KrugerrandFarms2 жыл бұрын
OOPS! OOPS! I saw a 380 case in there !
@Tread70
2 жыл бұрын
That is highly possible, re-sort after cleaning as well
@smsgtbulldog2 жыл бұрын
I think the Lemi-shine made a difference
@Tread70
2 жыл бұрын
I think so too...thanks for watching.
@jamespollard16705 жыл бұрын
You don't mess around when cleaning brass .
@gpav1 Жыл бұрын
How big is the mixer? 4.3cu.ft or bigger??
@Tread70
Жыл бұрын
Red harbor freight small mixer
@gpav1
9 ай бұрын
@@Tread70 if you can believe…. This just showed up on my feed…. Crazy slow
@talibanking2 жыл бұрын
No stainless media?
@Tread70
2 жыл бұрын
Nope, probably would polish them up, but wasn't worried about polish just clean. Polished doesn't shoot any better or worse than dull. Thanks for watching.
@chrismclaughlin6202 Жыл бұрын
So the primer pockets are still nasty... Must deprime first.
@Tread70
Жыл бұрын
For Pistol ammo, just do yourself a test. Deprime 10-20 and clean as you do. Then, don't deprime the same amount and load the same. Then go to your range and shoot the first five of each over a chrono, and what difference is made. You can make a video, shoot the next five at 2 targets at the same distance and show what the difference is.
@maxball6388
9 ай бұрын
Depends on cleaning method. I deprimed a batch of .38 and then dry tumbled and it was a pain in the ass getting the pocket free of debris
Пікірлер: 29
Now that's a tumbler! I have so much brass I see a concrete mixer in the near future!!
Boy that’s a load of brass! That worked really well 🙂👍👍
Tread, I don't know how I never saw this before today. What an awesome video!
@Tread70
Жыл бұрын
Thanks John
I can't believe I watched 4 minutes of rinsing brass.
Now that's the way to do it👍 Willie Bulletman sent me.
I like the fact it is so benchtop portable, ;-) Good job
@Tread70
Жыл бұрын
Great for the benchtop 😁
Go easy on the Lemi-Shine and don't leave them in water with the lemi-Shine overnight or it will discolor the cases.
KILLER. Maybe using a very powerful (not destuctive) to the still soing brass in an ultrasonic cleaner might bust up the really dirty cases. Brass is out of sight now.
What are you using as your screen? That looks sturdy.
@Tread70
7 ай бұрын
I believe my Dad made it out of expanded metal.
Wet cleaning without decapping is not the way to go. In a short time, primer will corrode in the casing. Resizing will just blow the primer bottom - scrapping the case.
@Tread70
6 ай бұрын
If you think that....
Super idea! Leni shine ? ? ? Not my country, what is it, what is the composition? Green liquid is hand dishwashing I suppose?
@Tread70
11 ай бұрын
Dish soap and citric acid powder(lemishine) minimal on the citric acid like 1/2 teaspoon for this large load.
OOPS! OOPS! I saw a 380 case in there !
@Tread70
2 жыл бұрын
That is highly possible, re-sort after cleaning as well
I think the Lemi-shine made a difference
@Tread70
2 жыл бұрын
I think so too...thanks for watching.
You don't mess around when cleaning brass .
How big is the mixer? 4.3cu.ft or bigger??
@Tread70
Жыл бұрын
Red harbor freight small mixer
@gpav1
9 ай бұрын
@@Tread70 if you can believe…. This just showed up on my feed…. Crazy slow
No stainless media?
@Tread70
2 жыл бұрын
Nope, probably would polish them up, but wasn't worried about polish just clean. Polished doesn't shoot any better or worse than dull. Thanks for watching.
So the primer pockets are still nasty... Must deprime first.
@Tread70
Жыл бұрын
For Pistol ammo, just do yourself a test. Deprime 10-20 and clean as you do. Then, don't deprime the same amount and load the same. Then go to your range and shoot the first five of each over a chrono, and what difference is made. You can make a video, shoot the next five at 2 targets at the same distance and show what the difference is.
@maxball6388
9 ай бұрын
Depends on cleaning method. I deprimed a batch of .38 and then dry tumbled and it was a pain in the ass getting the pocket free of debris