CLEAN JEEP CHEROKEE XJ ON 37s. ALL YOU NEED TO KNOW!
Last night I visited my friend Javier at Karnage Motorsports Miami. He has a clean Jeep Cherokee Sport XJ, 2000 very similar to mine, but he is working on taking this build to the next level. Starting with trimming the fenders, swapping the axles for a set of dana 44, SYE, 6.5 long arm lift kit and a set of very aggressive 37x13.50r17 tires. YES! I had the opportunity to see this BEAST! in person and It was great!. Pretty much what I am planning on doing with my project Jeep XJ.
Make sure you follow Javier on Instagram @jc.xj and on youtube: jc.xj as well.
LINK TO GET MY HEADLIGHTS ON AMAZON BELOW. FREE SHIPPING RIGHT NOW!
amzn.to/2NSLpHR
AS ALWAYS SUBSCRIBE TO THE CHANNEL! DROP A LIKE AND LEAVE A COMMENT!!! SEE YOU SOON FAM!
Music Info:
Track: Dread Pitt - Reckless (ft. C.) [NCS Release] Music provided by No Copyright Sounds.
[Dreadpitt] • / therealdreadpitt • / dread_pitt • / dreadpitt
Say Good Night by Joakim Karud / joakimkarud Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0 creativecommons.org/licenses/b... Music promoted by Audio Library • Video --- • Contact the artist: music@joakimkarud.com www.joakimkarud.com/ / joakimkarud www.joakimkarud.com/use-my-music/
Пікірлер: 111
Hey Guys! I forgot to mention I just created an Amazon Store for the channel! I've been adding products that I've used in the past as well as parts that I think are great additions to our Jeeps! go check it out and let me know what you think. Follow this link www.amazon.com/shop/vehicle_tribe
@gasperajdnik5627
5 жыл бұрын
Cheers mate
@pvmwarchief
5 жыл бұрын
I live close by the palmeto 5minutes from carange motorsports lets meetup check out my project jeep @jeeplifejesus main ig @savagejesusj
@ryanchenier-poulin8570
4 жыл бұрын
Wj upgrade then from wj to track hawk haha love the jeep; ♡♡
sweet jeep, its the same as mine. I have the Hanson off road rear tire carrier and its very nice. If i could do it again though i'd prolly buy the jcr.
I have the same jeep my brudda and wen mine grows up I wanted it to be just like yours,awesome jeep,
VEHICLE Tribe captions working thank you 😆 guy have a good night JEEP Dreams 👍👍👍 C😎😎L
That's a cool rig for sure but the cut and fold is great for causing rust issues, cut my rear 1/4s out completely and welded in some 1/8" plate,works great and no worry about rust.gonna do a reverse mini tub on mine next for 35s get more room then the cut fold on the rear wheel wells
Looks awesome! I’m going to try and fit 35s with a 3.5” lift on my 2-door XJ. Pretty much am going to have no up travel.
Парень! Ты строишь мою мечту!!!!!!👍👍👍
I saw that jeep behind the XJ at Jeepfest in Ohio. That thing was sweet. Nice XJ man!
Love seeing all the tntcustoms stuff
That is clean, damn nice rig.
My XJ is same color and has a 6.5 long arm on 35’s
Not sure about the build, because I'm not noligable about jeeps... However I love the XJ's! These jeeps are my favorite! 👍
That's a bad ass looking truck...
How's the front axle truss holding up? I only ask cuz those are some cold welds.
Nice XJ 👍
Awesome vid bro
@VehicleTribe
5 жыл бұрын
Elijah Tomlinson thank you man!
Nice XJ.
Nice Cherokee!!!! My 1999 Xj has almost 350,000 miles and just like new....
@VehicleTribe
5 жыл бұрын
Bob Quattrini damn 350k!
What is the measurements for a six and 1/2 inch lift with Rusty's adjustable control arms on a 98 XJ Jeep Cherokee?
No flex, just rub boi!
Great lookin build. I need to work on my XJ
@ooVEXXXoo
5 жыл бұрын
Yeah yo do. And I need to get mine ready for events
@robbiebreaux5221
2 жыл бұрын
We all do. They are never finished.
First hell yea!!!!!!!
@VehicleTribe
5 жыл бұрын
Julio Rodriguez there you go! Lol
Where'd you but the Ultimate 44?
I need tail lights for my xj any recommendations
So what happened with the problems on your previous video?
How much do you think the entire build would cost
What gears are you running in order to turn 37s. I'm looking at changing from 33s to 37s this winter on my 99 xj but I have the stock gears right now and stock shafts.
@lol123321123321
Жыл бұрын
5.13s is as deep as you can go on stock axles. It used to be 4.88s. I ran 4.88s with 33s and now 35s. Also it's a ax-15 5 speed. I'd want 5.38s for 37s personally
Where did he get the 37’s?
How many miles per gallon you get on her bro?
I know Javier i went to elementary, middle and highschool with him
He needs to fix the angle on his rear shackles. Should be at a 45° angle towards the rear of the jeep.
@VehicleTribe
5 жыл бұрын
undefinedglory6661 yeah he is aware of that. There are some fine tuning to do still.
@yerwrng
5 жыл бұрын
You fix rear shackle angle by adding a rear cross member a link bridge and 4 control arms in a triangle configuration... you don't put money into leafs .
@ssouthboundpachyderm
5 жыл бұрын
Ah yes every xj must have a four link or else it’s crap yes?
@yerwrng
5 жыл бұрын
@@ssouthboundpachyderm no but spending a ton of cash on leaf springs when its super easy to link the rear makes leafs a waste of cash
@VehicleTribe
5 жыл бұрын
yerwrng don’t know how your Math works, he is using the same Leafs from the previous lift kit he had, only purchased the shackle relocation from RC that is around $200 and welded the U-bolts eliminator kit (very inexpensive) in total he spent less than $350. Now, you compare those $350 with over $1.2K that cost a true 4 link with the cross member and coil springs? Don’t know you but I would definitely stick to the leafs for now until I get enough money to upgrade.
How many miles does it get
Maxbilt trail tails on that wrangler. So sick
Look at that welding 6:14
@nathanflecke9635
5 жыл бұрын
I am a professional welder and that is disgusting
@FatChicken56
5 жыл бұрын
@@nathanflecke9635 im not a professional welder and i agree
@seniorxj2931
5 жыл бұрын
HOLY BUGER WELDS!
@gregnorvell9730
4 жыл бұрын
I see they took some advise from ole' Jimbo, just smear that weld around and paint it black!
For sale?? Price??
Nice....
Hi
Nice.... Cool XJ. Should do well at Bear Island (if it's still open). Lots of deep mud. Another Florida native with a YT channel is Rusty411. Check it out. Lots of content between all you guys. Just subbed to his channel. I'm always looking for XJ content. Thanks for sharing.
I bet that room smells like yummy new tires, mmmmm
@VehicleTribe
5 жыл бұрын
OH YES!
Still have the 4.5 parts? I'll take em
@VehicleTribe
5 жыл бұрын
Brian Baker I believe so, send him a DM @jc.xj
Javier tiene canal en youtube?
does rough country 4.5 actually mean larger? my 4.5 Zone seems a lot smaller than that, but im on 33s not 37s lol
@pvmwarchief
5 жыл бұрын
That's why brother
@ososugiru
4 жыл бұрын
here he's sitting on 6.5" he was on 4.5".
No room to flex it out.
How much down travel left on those shocks?
@VehicleTribe
5 жыл бұрын
WhoIs MichaelLazar these are not the shocks he is gonna use.
@mayk3lll
5 жыл бұрын
VehicleTribe oh so he’s not gonna use the fox shocks on it
@VehicleTribe
5 жыл бұрын
WhoIs MichaelLazar no, he is gonna use single Fox without the reservoir for 6”+ lifts. 👍🏻
Yooo hmu on those parts
i want that roof rack
Looks nice but rear axle to far back..
@VehicleTribe
5 жыл бұрын
Stephen Carr wait until he cut and folds the rear you’ll see that makes sense to push it back for more flex and room in the back.
Lmao the steering didnt wven move the tires. Old stock still going lmao
Bugger
The huge wheels look like a mullet hair do on an XJ. Bad image for overland units.
Had the jeep for three yrs now? You mean now? Not earlier or later... but now. You had it lifted for 2 yrs? But not now?
Plz keep cutting up clean Jeeps. Makes mine more valuable :)
I'll take the cargo rack if you can ship it...
@VehicleTribe
5 жыл бұрын
Aaron Birtcher send him a DM @jc.xj maybe you guys can make it work 👍🏻
For a jeep being built with this kinda money envolved and in nice shop youd think it would be set up much better for real world wheeling. Lots of cool stuff but seems executed all wrong. Looks more like a pavement pounder.
cherokee lift 6,short arm?
@VehicleTribe
5 жыл бұрын
rigs offrods he was waiting for his long arm kit to arrive)
@rigsoffrods9386
5 жыл бұрын
@@VehicleTribe I do not know English, so I asked in the comments, sorry!
@VehicleTribe
5 жыл бұрын
rigs offrods oh sorry, no problem, I thought you have missed that part, he just put the short arm for now to take some measurements while he waits for his long arm to arrive.
@rigsoffrods9386
5 жыл бұрын
@@VehicleTribe ok thx!
@kenskens69
5 жыл бұрын
Really mesurement with short arm , i will think they know that will not work with long arm my be im Confuse....
What color is that?
@liamstinson5414
3 жыл бұрын
Red
What’s the smallest lift u can run and have 35s ?
@camaroboi13
4 жыл бұрын
hayen hinkl depends on how much cutting you want to do. 6.5” on 35s would work with cutting. 37s are kinda dumb for realistic off roading, you give up quite a bit of flex to look cool. 3.5” on 32s, 4.5” on 33s, 6.5” on 35s.
@camaroboi13
4 жыл бұрын
hayen hinkl depends on how much cutting you want to do. 6.5” on 35s would work with cutting. 37s are kinda dumb for realistic off roading, you give up quite a bit of flex to look cool. 3.5” on 32s, 4.5” on 33s, 6.5” on 35s.
35s and 37s are not an upgrade.
no rock rails on the xj? 🙄 of course.
@ryandix1004
4 жыл бұрын
Ryker don’t really need them in Florida
Not enough fender clearance and those look suspiciously clean underneath for off-road Jeeps.
@tylorarcher8439
5 жыл бұрын
M Printz a lot of shops require vehicles to be clean before pulling into a garage
@camaroboi13
4 жыл бұрын
tylor archer clean is one thing, looking like you’ve never been on dirt is something else
DEATH TRAP WILL BE ROLLING OVER NO DOUBT, GREAT HIGHWAY MACHINE LOL.
What happened to the channel?
Stance Yes Tires No...just an opinion
Green card please?
Pavement princess still never see the dirt
@VehicleTribe
5 жыл бұрын
Scott West it’s funny how you don’t even know the guy or follow his build and you throw this nonsense comment here...🤦🏻♂️
Jeep porn ahhhhhhhhhhhhhh
Shop is a wreck