Those seats look clean af

@tampabaybuilds6825

6 жыл бұрын

Nicolas Aguilera Thank you! I love em.

Why do people feel the need to make negative comments...wtf is wrong with ya'll....anyways it's a nice car, enjoy it brother.

@BHBLAP

28 күн бұрын

Because they wish they had his ride instead of walking 😂😂😂

Wow. After seeing all these racing videos, I realize that Mexico looks a lot better than I thought.

@tampabaybuilds6825

4 жыл бұрын

🤣😂

Awesome set up in my opinion I love everything u did to it!!!! Beautiful

One of the most beautiful fourth gen Camaros I've ever seen! Nice work.

@tampabaybuilds6825

6 жыл бұрын

Thank you very much!

@christopherperry3213

6 жыл бұрын

brandon mobley are you blind ?

Hey hey!! Sweet ride!! That's cool Jeremy tuned my cammed 2010 single cab. Cool video man👍🏼

I love the color, mine is the same. It used to look a lot like yours except mine has tan interior. So yeah, your cam is really holding you back. You have LS6 heads (I wish I had some) and your cam has -10 degrees of overlap which means you could flow a hell of a lot more air with a mid size cam without sacrificing drivability. My recommendation, not that you are asking, lol, is something like a Brian Tooley Racing stage 2 N/A cam. It is 227 / 234 on 113lsa and around .600" of lift. 4.5 degrees of overlap means you will maintain engine vacuum and would be easy to tune. You should always match your converter to your cam and your cam to what you want out of your car. Look at your dyno graph and see what RPM peak torque is made. You want your converter to stall about 500 RPM below that. Your current cam would be fun with a 2500 to 3000 stall and a mid size cam would want 3200 to 3600. My '00 Z28 is running stock heads, LS6 intake, long tubes, cat delete, and a 6.5 degree overlap mid size cam and I'm making 375 whp on a conservative tune. I went with a Yank SS3200 converter and a Level 2 Performabuilt 4L60E good for 750 whp. At a roll I smash the gas and grab 2nd gear at 5500 RPM. It is a lot of fun to never, ever be in a dead zone of my powerband. Best of luck!

Normally I much prefer these with the SS hood, but… I don’t know if it’s the colour or what… but this is probably the NICEST late model 4th gen Z28 I’ve ever seen. The colour is just amazing. I wouldn’t change a thing about it aesthetically. I know this is an older video, but I hope you still have this. I have an 85 IROCZ Z28, a 94 Z28, and a 2010 SS.

@tampabaybuilds6825

7 ай бұрын

Thank you! Unfortunately I don't have it anymore but I think about this car way more than I thought I would. I put so much time, effort and thought into everything I did to it. Comments like this make me smile still :)

@GamerPastHisPrime

7 ай бұрын

@@tampabaybuilds6825 hope you get one again. 95 Z28 was my first car, I loved it, and it unfortunately caught fire (wanted to be a Firebird I guess). Luckily I only had a few very minor burns, and melted hair on the right side of my head (a quick haircut and all was good), lol. That was in 2006, and I dreamt and dreamt about that car all the time because I missed it so much. Finally grabbed the 94 Z28 last summer. It’s not the exact same, but it’s pretty close (basically just doesn’t have leather, which I could easily change). Maybe one day that will happen for you too!

Very nice car. Love F-body cars especially the LS 4th gens. Have a 2000 6spd WS6 myself, have the same fear of the 10 bolt LOL! My best time is a 13.3 @ 105.79mph with full suspension work, lowered 1", OE size Nitto NT555, GMMG catback, and SLP lid. Your car build is close to what I want to do with mine. I should be able to get my longtubes and OR/Y done this winter, can't wait. Have a good one!

@tampabaybuilds6825

6 жыл бұрын

DarrenWS6 Very cool! Good luck with the build. Once you start, it seems like the mods never stop (combination of obsession and things breaking) lol.

Very sharp!!! It’s hot that you can name all your engine upgrades.. you lost me there because I have no idea what any of it means but it’s hot 😂💪🏾🤙🏾

I just bought an 02 ss 6 speed it’s my dream car and I love it!

@bhcamaro2002

3 жыл бұрын

Awesome!

That would be a heads cam intake car not a fully built engine...

@amirking1935

2 жыл бұрын

instablaster

Which performance shop did you go to for the cam swap? I live in Tampa

Ignore the hating comments. This is a nice car! Thank you for sharing it with us.

@tampabaybuilds6825

6 жыл бұрын

Haha gotta have selective hearing when posting to the internet. Thank you!

Nice car dude. I have a 98 z28 with the track package. I only have an slp lid with bellows and original exhaust. Soon I should put on headers and exhaust and it should wake it up. Spoiler and aero kit really keeps it stuck to the road at high speed ie 80 mph plus. I was thinking of getting a corvette and still might but I think I will keep this camaro. Its just too much fun without much expense plus you don't see too many on the road nowadays.

Beautiful car it's nice to see love for something besides an ss or ws6.i just picked up a 99 trans am about 3 months ago going through it and bringing it back to life it's sad how people treat these cars. I would be very interested in your list of parts and price if it's not too much trouble about to go through mine just kinda lost. First build for me.

My ac compressor seized up and shredded my belt yesterday ); any way to bypass it? i dont use ac anyways. its a 96 z28

honestly unsure if you meant full bolt on? also have one of these, they're fun lol! I'm just wondering why you went with a blower cam from the LSA instead of a cam designed for n/a use? unless boost is planned? 👀

Looks and sounds good man! 02 SOM here!!

@bhcamaro2002

3 жыл бұрын

Nice!

Nothing like a Camaro! The poor man's vet

@TreyGoose

5 жыл бұрын

Its funny u say that cuz 90s camaros and vettes go for the same price on the street😂5k-10k. At least where I live

@v3rde776

5 жыл бұрын

Camaros got the same engine as the corvette every year but cheaper and have a lil more room...nothin wrong with that!!!

Cool Drifting 🔥🔥🔥🔥

How did u get those seats?

Who did the seats for you?

Very very good man 🤘🏻

I love the car dude! But you should add a smooth bellow to make more rpm but your choice and it will add a bit more horsepower

Should have went with aftermarket heads and I guess more cam! 380 seems light for all that work on heads with new cam!! Slap some trick flows or something breathing over 250 cfm

Last generation of American muscle to have balls

Nice ride

Have a good 4l60e out of a 4 generation Camaro in Tampa/Bayshore

Sounds so sweet.

For the cost that guys gave me, I could put on an edelbrock supercharger for almost the same as heads and cam. Its crazy what they charge in virginia for that work.

What rear end did u go with. My ls1 was hitting 10s .. And my 10 bolt rear is going out . No more spray for me I'm running on motor now .

@tampabaybuilds6825

6 жыл бұрын

Went with Motive performance 3.42 gear and pinion set. An entire rear end replacement was out of my my budget. I made another video reviewing the rear end and new transmission, you should check it out if you're making changes.

I like it .... looks good ...

Sick car bro

@tampabaybuilds6825

5 жыл бұрын

Thanks!

Nice car

We have one of these but it's an ss, grey and different exhaust. But I kid you not you have the exact engine setup we have even the headers are the same😂

Nice car bro. I see a lot of hate for the 4 speed auto but my Diablo sport tune makes my automatic hit HARD... And you won’t spill your beer.. lol..

@mikeverything4098

4 жыл бұрын

Speed Razer I’m bouta cop an 01 with an auto where and how much is that diablo sport tune at

@chrisfallivene7404

4 жыл бұрын

@@speedrazer2000 no way thats crazy can you put a link to that

@Camaro254

3 жыл бұрын

You need a stall

Beitiful car I need a buy one of those

Nice job. Why only 380 H.P. ? I would have thought more around 430 or so

Beautiful build! I'm trying to figure out what color to paint my fbody. Subscribed!

I think we have a slightly bigger cam tho

Hey, do you remember what that colour is called? Sadly I wrote off my 94 Z28 a few weeks back.... looking at a new one, which is black, but it might need painted. My other car is black, so I may look at something different. I'm thinking either the stock quasar blue they came in at the time, or something like this.

As soon as you upgrade that car you need to upgrade the transmission at least with a good transmission cooler A lot of times they get hot and that's when they burn up just get the biggest trans cooler you could get. tThe derale transmission cooler is perfect you'll be good sicker all day

YES YES YES DO IT AGAIN DO IT AGAIN!!!!!!

I still love the car

Hey are you in the Tampa Bay area ? im currently working on my 94 T/A. 6spd LT1,i also have a 93 Lt1 Z28 auto if my cam choice and head work works out imma gonna treat the Z to more power ! The LT1 sounds badass . If yall are in the area it would be nice to get together get an F body club going . Anyway GR8 video

@tampabaybuilds6825

6 жыл бұрын

Hey, yes I am in Tampa. I'm part of a FB group called "Florida camaro and firebirds", they sometimes do gatherings and f-body cruises if you're interested in going that group.

I got a 2004 Corvette C5 .. with baby cam and 799 heads longtibes xpipe .. but stock mufflers I made 380whp and 420lbs torque .. it's a a4 auto .. fun car and very street happy I love it .

Love me my 2002 Z28 ....

No wonder the rear end and trans is going out.wow

Hate black rims but that's a clean maro

What do you think I’m gonna put a cat back with no muffler on my stock ls1 trans am ws6 too loud or is it a good idea

@tampabaybuilds6825

5 жыл бұрын

It'd be too loud for my taste. Needs some sort of restriction to avoid sounding raspy

@austinkerzisnik8750

5 жыл бұрын

TampaBay Builds thanks for the reply I already bought the deleted muffler slp so it’s whatever I won’t mind the drone or the noise

@motocrossadict1

5 жыл бұрын

Fuck it! It’ll sounds gr8.

@TreyGoose

5 жыл бұрын

@@austinkerzisnik8750 keep the resonators☝

Faster than a Mopar

Nice car bro. I think you're missing on more power.... would def get it tuned/dynoed again. 02 SS M6 with lid, long tubes, slp LM put down 341RWHP on a Mustang dyno. I know you're A4 and probably an earlier model year 4th gen but with those mods you should be way over 400RWHP.... probably in the range of 420-440RWHP. Good luck and you're right streetability is very important so it's understandable if you dialed the tune down a bit to make it like stock.

@scottwilson599

5 жыл бұрын

Ughh there is no way he's going to be anywhere near 440rwhp in an automatic with a baby cam of 216/224 and a set of ebay ls6 heads with a 200 dollar port job. Get real.

I have a LS1 with just bolt ons lsx 92 mm throttle body and intake mild comp cam Texas speed port polished heads long tubes built 6 speed putting down 440whp no where near built ether

It's beautiful but go with 17s all the way around with wider tires in the back!

@tampabaybuilds6825

6 жыл бұрын

Thank You! It's got 18x9s all the way around with Hancook ventus V12, 265s.

YEEEEEEEEET!

4th's Rock!

@bhcamaro2002

3 жыл бұрын

🤟

I would say horse power is low for all that. I’ve got a 02 WS6 with full kooks heads into true duel exhaust with a SLP box with the rubber tube connected to the Throttlebody. Tuned and it made 365hp without H/C/I. Btw mine is a m-6 too.

@speedrazer2000

Жыл бұрын

I love the kooks headers but man they are Expensive.. 👍

you got catched by the algorythm

My best time Stock with just a K&N filter was 13.12 @108mph ... 4-speed Auto ...

@trillrifaxegrindor4411

5 жыл бұрын

it probably would've went 13.12 without the k+n

@richki.24

5 жыл бұрын

@@trillrifaxegrindor4411 , probably.

😂😂😂 my rear end is going out and trans is slipping...... floors the shit out of it leaving parking lot 🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️

That color is nice as hell what color is that?

@tampabaybuilds6825

6 жыл бұрын

Carlos Ramirez Thank you. I believe it's called medium red. You dont see too many in this color so it's pretty unique, which I love.

You should lower the suspension on the car it would make it handle and drift better!

@bhcamaro2002

3 жыл бұрын

I agree

I mean I’m going thru these comments yes I see what everyone is talking about with all the mods yes he should have more power but at the end of the day it’s his car these were the last best Camaros they ever came out with funny thing is I had an 02 SS 35th anniversary I sold it I for 10k I Kept up with hellcats, ate up mustangs for breakfast so 🤷‍♂️ 5.7 LS1 6 speed I love it😍😍

@bhcamaro2002

3 жыл бұрын

Damn should've kept it but yes they're underrated on power and value

Was pretty cool till he said it was a automatic

@ozzymilch

4 жыл бұрын

He did say he was making the car his...

@francowolfmurd9758

4 жыл бұрын

Oscar Milch lemme guess you can’t drive manual just like this guy huh😂😂

@ozzymilch

4 жыл бұрын

FrancoWolfMurd Trying to, my dad taught me and I’m still trying to get the hang of it, just got my learners permit

@Crazyarnold12

4 жыл бұрын

Omg no manual, MANUAL SUCKS IN MY OPINION!

@themmaboom8045

3 жыл бұрын

Manual is cool for a weekend car or if you dont live in the city lol

How much do you think the motor build cost ya

@tampabaybuilds6825

6 жыл бұрын

02Maro SS Much more than I expected, I easily doubled my budget. I planned on doing just cam and headers, but since the heads had to come off to replace the lifters, I ended up doing a lot more. Total parts were about 2500 and labor was about 2400. If you're interested in doing a similar build, I should still have a complete list of parts and prices to do it right (including all gaskets, springs, lifters, pushrods...etc). Let me know and I'll dig it up.

@02maross90

6 жыл бұрын

TampaBay Builds That’s not too bad I defiantly wanna do a build like yours that car sounds amazing did a shop do all the work ?

@tampabaybuilds6825

6 жыл бұрын

Yes I had a shop do the work. I can attribute about half the cost to labor...

Jeremy!!!!

I’m not being a hater it’s not my car... But if you lower it and put some chrome C5 wheels on it. It would be perf 😍

What brand are your headlights? Where did you order them from? Thanks.

@tampabaybuilds6825

3 жыл бұрын

They were ebay headlights, not sure sorry

@anonymouslegion4928

3 жыл бұрын

Halo I have the same ones on my 98 Z28 also fully built

Nice camaro bud. You should lower it a little though. I've got a complete BMR suspension on mine, lowering springs, lca's, adjustable panhard bar, subframe comnectors, etc.

@JK-li7fp

6 жыл бұрын

Drive it Like ya stole it Do you have long tubes? Curious about clearance issues.

@driveitlikeyastoleit55

6 жыл бұрын

JK yes kooks long tubes. They fit pretty good, although if you car is lowered your gonna have to be careful over speed bumps and such. It's worth it though.

@tampabaybuilds6825

6 жыл бұрын

Exactly why I don't want to lower it. I have the TSP catted Y pipe so it's pretty thick. There's not a whole lot of wiggle room for lowering it.

@bhcamaro2002

3 жыл бұрын

Nice 4th gen!

1st time I'm ever seen a Honda Z-28 #tuner

@tampabaybuilds6825

6 жыл бұрын

LOL! What?

@enginelife8449

5 жыл бұрын

Christopher Perry yeah what?

That's a typical setup not 'fully built'. But even then it looks like 245 tires and a clapped out 10 bolt he's talking about.

Get a performabuilt lvl 2 4l60e and triple disc 3600 converter thank me later.

Nice car man, but see this is what gets me. You have heads, cam, oil pumps, and a bunch of other stuff and got 380hp. I've got a 98 TA auto, with full slp intake and exhaust. ( cold air, MAF, ls6 intake, LT's, high flow cats, y pipe, and loudmouth 1) and I had it tuned and put on a dyno and now it's at 370rwhp. Maybe it differs car to car, but shouldn't your car make a lot more power? I dont know, maybe I just got a freak car that happened to make more power then others.

@tampabaybuilds6825

6 жыл бұрын

Agreed! Even my drag times some people with full bolt ones are close to me, idk what it is. Granted it was 105°F when I dynoed, but still, it definitely seems lower for everything I did to it. If I had gone bigger cam, would of easily put me in the 400s though.

@DickVanNiggz

6 жыл бұрын

6605jeremy every dyno reads different but that sounds like a very happy dyno, especially through an auto

@scottwilson599

5 жыл бұрын

@@DickVanNiggz Ya its called a bullshit dyno. 370rwhp with just headers on an a4? Lol riiight. I bet his car doesn't run any faster than like high 12s. This guys car runs low 12s, prolly could get high 11s with a better 60 foot time.

Yo man nice car and good content but you are very tense. Relax dawg

@tampabaybuilds6825

6 жыл бұрын

Mason Keener Lmao! I definitely was. I wanted to re-do this video but then it started blowing up with views. Im getting better haha just did a video on my review of the transmission and rear end I got. Thanks for watching man!

@masonkeener6902

6 жыл бұрын

Haha I understand just keep making vids it's good stuff my man you would easily blow up I'll keep watching

1:12 OH MY FAULT

15 lsa cam??? What the fuck?

Sick f body love it

Hey I have a similar color ss

MMMMIIINNT

4L80E?

@tampabaybuilds6825

6 жыл бұрын

4l60e

@wannabejeeper

6 жыл бұрын

No, I mean would that have been an option?

@tampabaybuilds6825

6 жыл бұрын

Ohh. I did the research and there's quite a bit of modification that needs to happen in order for it to work. I went with a race built 4l60e (made a video review) and I'm happy with it so far.

@MICKSHRED

6 жыл бұрын

He could have, those wwee used in heavy duty trucks.

My 10 bolt has been 10.81@125

@tampabaybuilds6825

6 жыл бұрын

Wow, that's impressive. It's hit or miss with these 10 bolts. New trans and rear are going on tomorrow! What do you have done to yours?

@CamaroRick

6 жыл бұрын

My previous 10 bolt went 11.2 @125 with a lazy 1.78 60ft Broke it a week later spraying a 200 shot

Mexico my a$$.. Nice car thou.

Nice car tho

H/C/I is definitely not fully built...

but they do need a BiGGer rear different.

kzread.info/dash/bejne/f2uItsmKnLO1YZs.html this is the link to the video.

I'm near Tampa bay My 98 t/a will freight train ya.

@tampabaybuilds6825

6 жыл бұрын

andrew paul Just got new rear end and built trans installed. Are you FI?

Mexico? Looks like the road by Tampa Executive Airport. Lol

@tampabaybuilds6825

5 жыл бұрын

Lmaooo!!

@paullewis935

5 жыл бұрын

Be quiet snitch

Love the build and much local love tampa bay!!!!!! Looking forward to boosting my fbody check out our page

the gap on the headlight though....

@BigDaddyElusive

4 жыл бұрын

Ebay headlights

@Multi8384

4 жыл бұрын

whatsabubbler yea for some reason u see that alot on 4th gen camaros aftermarket headlights

I understand that autos are better for drag racing but i rather have a manual

@bhcamaro2002

3 жыл бұрын

Same here

should have got the t56

@daltonandrew168

4 жыл бұрын

Agreed. But they are stupid exspensive and getting harder to find everyday.

@bhcamaro2002

3 жыл бұрын

Agree

It’s an automatic though😢, 6 speed for the win

@p71owner53

5 жыл бұрын

IOG Volts that’s what I say

@p71owner53

5 жыл бұрын

Mechanix TheName yes your right on the track but driving around going through gears etc your in control of the car 💯

@joeyporter3356

5 жыл бұрын

IOG Volts I Just said that too smh 😂

My 02 LS1 SS Camaro came with the LS6 intake. Its also got a mild cam, LS6 stage 2.5 heads, LT Headers, street converter stalling at 2700 RPM, chromoly drive shaft and rebuilt 10 bolt with 3.73 gear. Also has full tubular UMI suspension front to back including K-member, front upper/lower a-arms, torque arm, driveshaft loop, rear control arms, pan bar, strut bar etc. It ran 11.3@119 with no weight reduction on a 17 inch street wheel and low profile drag radial. I'm upgrading to a drag pack and 4000 stall converter and looking to run 10s in 2018. kzread.info/dash/bejne/iKGbq7yoXdbLdrQ.html

@tampabaybuilds6825

6 жыл бұрын

Nice! I need some suspension work. I just got the trans and rear end fixed but only ran 12.2 at the track. I was hoping to drop into the 11s.

@mustgofasterracing6248

6 жыл бұрын

What converter you running and at what RPM are you shifting?

@mustgofasterracing6248

6 жыл бұрын

Did you rebuild the rear with stronger axles. If not you will need to. I am doing a rebuilt trans with my new converter. You need to get HP Tuners and record data to see where your converter is actually stalling. It is likely not stalling where rated. You need to know where it is stalling exactly, so you can know what room for improvement you really have.

Man you should’ve got a 6speed lol

@bhcamaro2002

3 жыл бұрын

True

thats super slow for all that work done ive got headers x pipe exhaust tune that runs 12.50s all day in SRQ btw

@mateseshko1684

3 жыл бұрын

who asked?

@markm4596

3 жыл бұрын

Stfu

@speedrazer2000

2 жыл бұрын

Mike, you need to put that car on your channel… 💯‼️

Not “fully built”🤦🏻‍♂️

@terryfonz4603

4 жыл бұрын

Stock bottom end with cam and supposedly head work??? That’s not near fully built!!!

380 whp and 370 ft lb… little low for a cammed ls1… little much for a 4L60E…

@tampabaybuilds6825

2 жыл бұрын

Truth!

@johnmcknight6221

2 жыл бұрын

No and no

@speedrazer2000

2 жыл бұрын

4L60E Can handle 500 HP. No guarantees tho… 😄

I hate to say it but those headlights fit terrible