Contact us at the V8 Speed & Resto Shop to chat about your Bronco ideas! Http://www.v8speedshop.com or 314.783.8325 today.

Beautifully done as always!! Love these Coyotes in older Fords. I would love to put one in my '68 Cougar to make a Coy-Cat. Also loving the podcast! Has actually inspired me to do some sanding & priming on my rusty old car while listening. Finally using my N99 mask for what it was made for!

@bilbobaggins4710

4 жыл бұрын

Do it man...Git her dun 🙋

@V8TV

4 жыл бұрын

That's great to hear, glad you like the podcast! BTW, it can be found on www.v8radio.com for those unfamiliar. Thanks for the kind words!

Nice work!!

Such a nice up grade and a quality install from the guys at V8 Speed and Resto shop....always look forward to what's going on in the shop.

Sweet ride. !! Amazing installation. Truly professional. Now if I just had coin to do a 67 cougar. Ah!

Love the Bronco Coyote combo, beautiful little pony 🙂

@V8TV

4 жыл бұрын

Thank you 🤗

Fantastic upgrade solid work

@V8TV

4 жыл бұрын

Thanks 👍

like the truck and motor..but i think i would have done a 351 / 408 stroker and it would have fit nicely ...but still cool..way better then a crappy LS swap

@bilbobaggins4710

4 жыл бұрын

Yeah they're garbage that's why they have been put into everything...Guys are adding turbos with 800hp on stock bottom ends

@merc-ni7hy

4 жыл бұрын

@@bilbobaggins4710 let me put it this way ..the LS is a good motor..but not for any fords..i'm a ford guy./.i would never butcher up a ford to put any chevy motor in it.ford windsors are also a very good motor and will make lots of power too

might be worth mentioning a 302 cubic inch motor is the older version (same displacement) as a 5.0 liter coyote. oh what difference metric makes. Great looking uncut rig. Awesome work by the team. That truck looks amazing.

@V8TV

Жыл бұрын

Thanks for the kind words!

Great work guys.

@V8TV

4 жыл бұрын

Glad you enjoyed it!

Gettem , Kevin

Definitely want something like this as a daily driver.

@V8TV

3 жыл бұрын

It's entirely possible with the upgrades we made. The owner drives it a lot!

@ET74019

3 жыл бұрын

@@V8TV keeping that in mind...next project is the money lol

Amazing! What transmission and transfer case was used?

Mo Poweh Baby

That's a nice Bronco! What kind of suspension lift, body lift did you end up putting on it? Also, what tire size is on it? Whatever you guys did looks great, just wanna know the winning combination. Thank you!

What a baby ..what bluebis it? ..❤

I have a 75 Bronco and looking to do something similar. Am I correct in thinking that other than the wheel well modifications, the engine fit? motor mounts lined up? Great video!

I have a 73 I am interested in doing this only with a automatic transmission

Are you using a t-5 transmission

I need a coyote in my OBS not too many OBS trucks with coyotes

I don't know if it's possible but I would love to an engine swap of the new Ford Bronco with a 580HP Aluminator 52XS! Who's with me?

@V8TV

2 жыл бұрын

It would fit, but it would be a handful to drive!

Is the coyote justa 4 valve bored out crown vic motor...looks very similar

@V8TV

4 жыл бұрын

The Coyote is similar, but improved in many ways to the previous Mod motors. Here's an overview... 5.0 L Coyote The 5.0 L; 302.1 cu in (4,951 cc)[13] Based off of the architecture of the 4.6L and 5.4L Modular V8’s, the "Coyote" V8 is the latest evolution of the Modular engine.[14] Ford engineers needed to design a V8, specifically for the Mustang GT, that would compete with the GM 6.2L LS3 used in the new Chevrolet Camaro, and the new Chrysler 6.4L Hemi ESF in the Charger, Challenger, and Grand Cherokee. Since this engine replaced the already popular 4.6L and 5.4L Modular Engines, this engine had to remain close to the same physical size of the outgoing 4.6L, and share other specifications with it such as bore spacing, deck height, bell housing bolt pattern, etc. in order for the engine to utilize existing Modular production line tooling (the source of the 'Modular' designation for the engine family). The result was the 5.0L Coyote, which produced roughly the same amount of power as its competitors, but with a much smaller displacement. To strengthen the block enough to handle increased output, webbing was extensively used as reinforcement in the casting, rather than increasing the thickness of the walls. The intake plenum was also situated low between the two cylinder banks to meet the height constraint, thus the alternator traditionally placed low and center was moved to the side of the engine. It shares the 4.6 L (280.7 cu in)'s 3.937 in (100.0 mm) bore spacing and 8.937 in (227.0 mm) deck height,[15] while bore diameter and stroke have increased to 92.2 mm × 92.7 mm (3.63 in × 3.65 in), respectively. The engine also retains the 4.6 L's 5.933 in (150.7 mm) connecting rod length, which produces a 1.62:1 rod to stroke ratio.[16] The firing order has been changed from that shared by all previous Modular V8s (1-3-7-2-6-5-4-8) to that of the Ford Flathead V8 (1-5-4-8-6-3-7-2).[16] Compression ratio is 11.0:1, and despite having port fuel injection (as opposed to direct injection) the engine can still be run on 87 octane gasoline. The Coyote features all new 4 valve DOHC cylinder heads that have shifted the camshafts outboard, which allowed for a compact roller finger follower setup with remote hydraulic valve lash adjusters and improved (raised) intake port geometry. The result is an intake port that outflows the Ford GT intake port by 4 percent and the Yates D3 (NASCAR) intake port up to 0.472 in (12.0 mm) lift, which is the maximum lift of the Coyote's intake cams. Engine redline is 7000 rpm.[16] The Coyote is Ford's first implementation of its cam-torque-actuated (CTA) Twin Independent Variable Cam Timing (Ti-VCT) in a V8 engine, which allows the powertrain control module (PCM) to advance and retard intake and exhaust cam timing independently of each other, providing improved power, fuel economy and reduced emissions. The engine is assembled in Ford's Essex Engine Plant in Windsor, Ontario, using existing Modular tooling.[17]

Looks like the Gen 2 with 435 HP not the Gen 3

I have a 91 I love more than my girl. How much guestimate to put a coyote in it? Labor etc. It doesn't have to be accurate just a best guess

How much for the upgrade?

@V8TV

4 жыл бұрын

Hello Dee, we received your inquiry and will be getting back to you soon to chat about your Bronco ideas. Thanks!

Don’t take it off road w a k&n filter!

7-14-20 Duly noted youtube any search of Bronco today will have a Jeep add. Now piss off.

A 408 with AFR heads would stomp the living snot out of that Coyote at a fraction of the price.

@V8TV

4 жыл бұрын

In a drag race situation, it's possible. However, we have to consider the goals of the car and customer. He's not about having the fastest 4-wheeler on the trail. He wanted reliability, good power, and great economy... something the 408 would have trouble with by comparison. Good feedback.

@413x398

4 жыл бұрын

@@V8TV Do you have any idea how many pushrod engines have provided those criteria for Bronco owners over the past decades? The Coyote is oversized (mods to engine bay decreases value of vehicle), overweight, and lacks comparable off-idle torque, which is critical for low-speed maneuverability. Economy? Let's see how much money was spent on the engine and all the necessary associate components and the labor involved, and then figure out how many centuries it would take to come out ahead at the gas pump versus the Windsor.

@V8TV

4 жыл бұрын

You sound like someone who just wants to argue, but we're not up for that today. Have a great weekend!

@413x398

4 жыл бұрын

@@V8TV No, I'm someone who doesn't buy into the Coyote as the Holy Grail for anything Ford. It has its place, but a classic Bronco isn't it. People "argue" all the time on YT. It's called an opposing viewpoint.

@V8TV

4 жыл бұрын

Thanks for not arguing. Too many times people insist on their own viewpoint and don't accept any other ideas.

9