I bought a new Gen3/6spd for my project. I was thinking the 2yr warranty was a benefit, but from what I hear... it’s only if it’s installed by a Ford Tech.

Imagine if you can take 2 clapped out Coyotes, do some cutting and welding on both the blocks and heads as well as porting and polishing the modified factory heads and you have you're self a 6.2L Coyote V10.

I just budget build my 68 f100 short bed for under 20k. 2000 bucks for an f150 coyote, conteol pack, 400 bucks for a tr3650 with clutch and flywheel, champ radiator, crown Vic front end, explorer 31 spline traclock rear ended, and a $600 4 link from Ridetech with Coilovers all around. I pulled it all apart, powdercoated from the frame up. I’m building a 68 Mustang fastback which will be all new stuff. I will tow the mustang with the truck 👍

I never buy used... but... the one time I did thought I was getting a good thing turned out to be extremely frustrating. Bought an engine and transmission only to find out the package was not even close to the mileage the guy told me. Did every bit of homework I could think of and that whole mess has cost me about 8000.00 and my project delayed by years because now I dont have the money to get what I need. I know several ppl that have great luck, but I didnt. So from now on, only new for me.

Would love one in my '95!

New Gen 2 crate package worked perfect for my 53 and it was priced just right at $12,500 with a warranty!

@jthet2001

2 жыл бұрын

Transmission included?

@larryhobgoblin6172

4 ай бұрын

i got a f150 gen 1 from facebook for 1000$, swapped a few parts out to make it comparable with the mustang coyote and had it in the car for half the price of just your motor lol

A gen 2 with low miles is only around $5K though. Although it’s not quite as good as a gen 3 it’s still arguably the best bang for your buck if you’re on a budget.

@theshark2804

3 ай бұрын

Ill take a gen 1 if it save me cash

You got all teary eyed thinking about a wrecked Mustang with a Gen 3. It’s okay Bruh. Happens to me too

If I had the money I would definitely put the 5.0L Coyote V8 in my 1996 Ford F150.

Makes sense, since you know the used 1 has 90% probability rate of being beat on. 👍

Smart decision.👍

Sounds good to me. I'll take two.

That makes sense!

Amen. Go new. Used = Someone else’s problems!!

Thanks

For a couple grand extra seems like the way to go

My friend Mike's 07 V6 Mustang could you a 5.0L Coyote V8 to replace his 4.0L V6.

I paid $3500 for gen 1 with 44k on it, and that included a the 4x4 6R80. it's not running yet ;) so I can't comment on if it was a mistake, but it seemed more logical for a used motor for me.. building it in my garage for myself - not a show truck. time will tell. also, If I had a $80k roadster frame (as shown in the video) it really wouldn't make sense to skimp on the used motor.

…ALL KIDDING ASIDE, if I had the money to do this conversion from FatFender just the way you Guys do em up and money left for nothing else, I’d do it in a flat second. Y’all make em look as if Ford was making these old F100s themselves today. Probably better actually.

Now if only if they had a 7.3 crate kit. I been leaning towards newer powertrain into my 90 bronco

@rainbowpup9377

10 ай бұрын

Hey I gotta 90 bronco too and I’m thinking about swapping it… you got any suggestions or tips or anything you could give me?

Hell with a control pack ID get a holley ecu

And you can make mtr and transmission and everything work?

I agree New Motors all the way nothing used going in my truck

Can you mate a 10speed to the voodoo 5.2

What chassis is that in the video or what is it for?

I'm tryna throw one of these in my 95 tbird

Do you have a Coyote engine for sale?

Is that 18k for motor and transmission

@FatFenderGarage

2 жыл бұрын

Motor, trans and control pack

First

Y'all don't care cause it sound like y'all just drop engine them go

Yawn on the 5.0 coyote bore is 3.63 by 3.63 stroke Really and a big 600 hp I'll stick with my 351 Windsor pushed out to 427 with a DoaE block with a Supercharger from a lighting as well in a Nice Cam from comp cams and all down in a 95 GT Wise people that have that Coyote don't want No part of it and Dynos out at 875 hp and want more 351 windsors is the Only way to go And a Hole lot less plastic Coyote motors is Fords joke Totally in a 3900 pound Mustang Lmao

@FatFenderGarage

10 ай бұрын

I think people want them for different reasons. I think we can agree on that.

LMFAO who cares if its new or used when you building the motor soo lilies wouldn't matter folks selling cars rite with over 200 thousand miles

None... Buy a L.S. engine...