Great visual explanation of the rules, much easier to comprehend when seeing actual rigs and the various modifications.

@slopppy75

4 жыл бұрын

I'm glad it worked out! thanks for the kind words.

This is the only video I’ve seen that has made any real sense of explaining the comp rules. Thanks for the helpful info cause after watching this I feel more confident that I understand what the real deal is a bit more. 👍👍👍

@slopppy75

4 жыл бұрын

I hope your next comp is super enjoyable! Thanks for the comment

@kravenkrawlhobby5438

4 жыл бұрын

Thanks brother

I can’t be the the only guy who took about 12 screenshots through this😭😭 Great job!

Thanks, learned more about these crawler classes in 11 min's than I have in years!!

Thank you so much! I want to build a class 2 but didn't know what needed to be on it. Awesome video, the visuals helped SO much.

The visual aid plus reading the rules really help thank you💯👊

Perfect! Clarifies the rules very nicely. Added a link to your video in 2 RC Crawler FB groups I am in! Thank You!

@slopppy75

4 жыл бұрын

Eric Shanahan thank you for sharing

@ericshanahan8296

4 жыл бұрын

Absolutely! Great info, especially for newer guys to the hobby like me.

OMG THANK YOU FOR THE funky MUSIC!

Awsome video cleared up some questions I had thanks for posting it up man keep up the good videos!

@slopppy75

4 жыл бұрын

Thank you. I’m glad to be of help

Súper knowledgeable getting ready for some first crawler comps and it helped tremendously and stopped me frm looking like a fool right off the bat

Thank you. Extremely helpful video.

Great work mister! thanks for taking the time to make this video!cheers!

@slopppy75

4 жыл бұрын

Thanks for the comment

Thank you! I was looking for a video like this! Off to crawl😎

@slopppy75

3 жыл бұрын

Glad I could help!

Sehr schönes Video, tolle Anlage, super Veranstaltung und top Wetter, was will man mehr !!! 👍👌

Great video, explains allmost everything. Goog job with the pictures! 🤲🏻👍 Thanks for making this!

@slopppy75

4 жыл бұрын

Thank you!

Some of the most beautiful rigs I have witnessed in action . Talent goes a LONG way in this video let alone discussing of the rules of scale rc crawling

@slopppy75

4 жыл бұрын

I've been going out to many comps and running into a lot of great builders and drivers. It still amazes me how talented some of them were. It's awesome to be in the hobby!

Amazing video......I am new to RC and know nothing about the different classes, so this helps a lot.....thanks

@slopppy75

4 жыл бұрын

Thanks for watching

Yeah appreciate you sharing, I have always wondered the difference. I'll watch for more.

@slopppy75

4 жыл бұрын

Thanks Andy. I hope this video answered some of your questions.

WOW! Great job on the Vid man! EXACTLY what I have been looking for and more!

@slopppy75

4 жыл бұрын

Thanks! Glad to be of help

Straight to the play list :)

Thanks for clarifying the rules/differences. Was very useful.

@slopppy75

4 жыл бұрын

Glad to be useful. Thanks for watching

That was a awesome explanation.

Thanks for this, a good explanation of the rules between class 1 & class 2.

ThNm you very much. Very informative

Excellent video! Thank you for clarifying so well.

@slopppy75

4 жыл бұрын

I’m glad to hear that. Thank you

Omg I Loved every minute of this and I learnt a hell alot, Thank you So so much for this valuable information Bro. Absolutely Brilliant 👍😎👍

@slopppy75

4 жыл бұрын

Thanks for the kind words!

Learned a few things that I could not figure out from the written rules! Thanks! Great video and helpful resource! :)?

@slopppy75

4 жыл бұрын

Thank you! I’m glad to hear that

Thank you! Good video! ⚡️

Nice ... Thank you very much for sharing

Great video. Lots of useful information.

@slopppy75

4 жыл бұрын

Thanks. Glad to be a help

Dude. This is gold.

@slopppy75

3 жыл бұрын

Thank you!

Excellent video ! I had to learn that my class2 needs some modification.

Thanks so Much!! I have been working on making my SCX10ll a comp 1 this cleared up so much for me!! You answered all my ??? Thanks

@slopppy75

4 жыл бұрын

I’m glad it helped! Thanks you

An excellent video CRAWLER75, so much to learn, super trucks, big thanks 👍

@slopppy75

4 жыл бұрын

Thanks for the comment

@slopppy75

4 жыл бұрын

Thanks for the comment

Excellent info thanks.

Good video helps alot.

Awesome video very informative and helpful Thks for making and sharing

@slopppy75

4 жыл бұрын

I leaned a lot while making the video as well. Thanks for the comment

Cleared up all kinds of questions I had about some differences between the two classes. Been looking for this for some time now. Thx a ton for doing this video.

@slopppy75

4 жыл бұрын

Great to hear. Mission accomplished! Thank you

Sympa la vidéo 😉

Thank you very much for the Vid... Next project of mine is a C2 rig and i was wishing me Vid like that and you made at perfect at the right Time 👍🏻🤘🏻 ! Thanks a lot because od you i know the rules clear 🤙🏻 ! Best regards from Germany Hannes

@slopppy75

4 жыл бұрын

You’re very welcome. I’m glad to be a help. Thanks for watching and please feel free to share with your crawling friends!

@hs31_5

4 жыл бұрын

@@slopppy75 I already share it but most guys in Germany want to build Scale Rigs... Thats not really my Style... I would love to have C2 Comps in Germany but most Events are Scale Events ... Do you also have a Insta Acount ? Best regards Hannes

@slopppy75

4 жыл бұрын

I don't have instagram. You can always start a class 1 or even class 0 competition. There is class 0 in SORRCA LIGHT rules and it's more strict than class 1. Super scale guys love class 0

Best way to break it all down by showing it on the typical vehicles in each class

@slopppy75

4 жыл бұрын

Thank you.

GREAT INFO MAN!!!!

@slopppy75

4 жыл бұрын

Thank you James

Very good info, I did not know all these specifications between class 1 and class 2, thank you 👍

@slopppy75

4 жыл бұрын

Thank you!

@satorrotas

4 жыл бұрын

@@slopppy75 😊👍

Thanks for your information bro. ❤😮😊

Great video. Really helpful for us new to the hobby.

@slopppy75

4 жыл бұрын

Thank you. 👍

Thank you for the informative video- I am complete noob for crawlers ❤

Helpful.Thanks.

@slopppy75

3 жыл бұрын

Glad it was helpful!

Great vid ty

@slopppy75

4 жыл бұрын

Thank you Sean

The scale and image are the best rc4wd It looks like an attractive product👍👍👍

Very nice video and super sensitive driving. I like the TRX4 chassis very much :)

@slopppy75

4 жыл бұрын

Thank you. Trx4 is very good truck and my comp trucks run on trx4 portal axles. I love them

@WorldControlRC

4 жыл бұрын

@@slopppy75 perfect mixture :)

Thats for this video it cleared up a lot of stuff foe me

@slopppy75

3 жыл бұрын

I'm glad it helped

Great video Just wondering the video show that class 2 trucks with a cage need rear shock hoops attached to the cage. Where does the Gmade BOM fit in with the cantilever rear end ?

Nice video :)

Great video

@slopppy75

4 жыл бұрын

Thanks for watching

Good vidio friend Very good adventure

@slopppy75

4 жыл бұрын

Thanks for watching!

Merci 👍

This is great, can you cover scale points too?

Can you use cantilever suspension on a class 1 flatbed build ? Great video aswell very helpful as am attempting 1st class 1 build.

Awesome video. Really helped out a lot but I do have a question. I have an element rc Enduro Sendero that I swapped out the rear shocks with cantilever shocks, but I have no rear mounts for the body anymore as they don't fit with the cantilever setup. Currently I just use a pair of zip ties to keep the body rear on with the original body mounts on the front. Would this break any rules or is it still good. I haven't had time to try out at a competition yet so I want to make sure I'm good or if I need to re modify it.

very interesting to see the differences to european class definitions I wittnessed so far. Especially how in some regards SORRCA strictly defines the tube requirements for a truggy, but In europe C1 does not allow the trie to portrude from the fenders, basically you can only drive what is considered Street legal in C1..and they always want a a license plate that has to be from the drivers home region. I see positives in all version!

@slopppy75

3 жыл бұрын

your c1 sounds a lot like C0 here. Not official class but it might be in the future

Very interessant video brothers 👍🤙👍

@slopppy75

4 жыл бұрын

Thank you!

Great job on the video mate...🙂🙂🙂 do you have restrictions on electronic on c1 c2 and c3? And gearing ratio or 1st and 2nd speed on the transmission and dig... thanks mate sorry just new on comp build

@slopppy75

4 жыл бұрын

There is no restriction on gear ratio or electronics used in any class. DIG is only on class 3. Let me know if there is specific parts you want to use that could raise a question

Great video man. Keep up the good work. Is there any rules specifying the motor type (brushed /brushless)?

@slopppy75

4 жыл бұрын

You’re good with any types of motor. The motors can’t be mounted on axles however ( MOA - motor on axle is illegal )

@yfellimban

4 жыл бұрын

@@slopppy75 thank you man. Sadly, we just started to have championships here in my country and the rules are just totally different and ridiculous. All my trucks got disqualified for having a brushless sensored system. All the other rules are totally wrong. Not just for crawling as all other races have wrong rules. For example, I've seen 1/8 trucks racing with 1/10 trucks. Short Course trucks racing with buggies and druggies. Monster trucks also race with other categories. Now all this and the still have a rule against brushless motors for crawling. Not going to enter any championship until they evolve.

For C1 on metal chassis rails can we use carbon shock hoops for the rear? Great video! Thanks

@slopppy75

4 жыл бұрын

You can use any material for shock hoops.

Great. I am just concerned about using my proline Ford bronco body that does not fit a stock axial scx10 frame. Can I modify the frame or find a shorter frame

HI im totally new to Crawl comp classes. I just purchased an SSD Trail Finder.. what is the best class for this rig to run on?

is there an in between? class 1.5, minimum front bumper and tires up to 4.73? i think it would be an interesting class. since you would still require class 1 specs such as front windshield and width and a few class 2 contingences' like tire size and front bumper.

oo i see now class 1 most for realistic scale, class 2 more for custom to be push the limit of crawler ability, thanks for explanation

Question I have element enduro sendero with proline cage and mojave front cab is class 2 or can be use on class 1, and nice video

@slopppy75

4 жыл бұрын

Thanks. Proline back cage is dovetailed flat/tube bed. Class 2 only

Great video what does a standard element gatekeeper class as

@trevorcrain9620

3 жыл бұрын

i thnk 2 or 3 because of bumper positioning and lack of body

Does the Redcat Gen8 Axe have a legal C1 chassis? Great Video thanks

@slopppy75

4 жыл бұрын

Yes of course. Portals(Gen8/scx10.3/ trx4) are legal in all classes. Thanks for watching

I am interested in class 2 … question about wheel base … is there a set wheel base for c2 I’m under the impression that it is 12.5” ? I do understand the bumper and chassis combined must be 3” longer than the wheel base .

Are there 1/24th 1/18th scale C1 and C2 competitions?

Cool vid! And I do have a question. For windshields. The TRX4 uses a sticker. Would that be considered a windshield or does it have to be see through (for class 1)?

The Everest gen 7 sport/pro has integrated shock mounts, would it be class 2?

Great video. I have a Vaterra Twin Hammers. I gess it only feet in the class 2? Unless adding wheel whels, and bumpers ?

@slopppy75

4 жыл бұрын

Sorrca states “Tub chassis are allowed, but chassis must be covered by the body and follow all other scale rules per class guidelines. An example of a tub chassis vehicle is CC-01, DF01, Twin Hammers, etc.” I think you can run in any classes as long as you meet all the other requirements

@Labonlabonne

4 жыл бұрын

CRAWLER75 ok. Thank you.

Where does everyone get these little personalized scale plates?

By tire size definition the TRX4 Defender would be considered a class 2 truck at stock. Is that correct? 117mm stock tire is 4.6 inches, video claims 4.19 before moving into class 2. Am i understanding this correctly?

Hi to all. One question. Where would you categorize a car like the vaterra twin hammers. It is also a crawler, but the chassis don’t have rails. About the body, it can be custom made to fit C1 or C2, but the chassis... Also it is front independant suspension and rear solid axle.

What are the specs or rules for sliders or electronic tray slider In order to get the 3 points

I want to build a C2 rig from the SCX10 Pro Kit and would like to do a half cab... what are the rules around the bed area for C2?

Are there certain chassis, tires or other parts that excel, or seem good but actually suck, at these competitions?

The segmemt abought chassis. I have a custom carbon chassis 15 inch long rails.. resembles a few of the pro style chassis I seen in vid. Is their a class 2 rule for a custom 2 rail chassis ...its 15inch long but shock points made in to chassis an its low center gravity skid

I saw my dads truck, sweet!

@slopppy75

3 жыл бұрын

Very cool!

So is the rc4wd c2x REALLY considered class 2 out of the box or does it need more ?

I just got my first rc truck. It's the easy rc 1/18 glacier square body. I'm deciding on getting into rc crawling and competition. I removed my rear bumper for more clearance. Is that against class 1 rules?.

So does the trx6 count as a class 1 vehicle? Just curious thanks.

How about the motor and esc regulation that is allowed and are not allowed? Is it the same ?

As far as a servo mounting what if you have an axial scx10 1 or 2 are you limited to only class 2 than

What class would the Capra be in if I put 2.2 on it?

What wheels are those at 10:19? Thanks!

I think I know the answer but it doesn't really say definitively anywhere... can you cut the chassis to shorten it at all in class 1? It says full length but then also says must be as long as wheelbase.

Excellent video! btw is there any class 0? They would be stock or factory rc rigs? or more a scale rc just like a real 1:1 street legals?? Thank you!

@slopppy75

4 жыл бұрын

evoxer87 class0 is not official but the crawl space Colorado has C0 rules laid out. Basically, hard body only, no trimming, max 4.0” tires and higher scale point cap are the notable differences.

@evoxer87

4 жыл бұрын

@@slopppy75 thank you for the info! 🙏🏼👍🏼👌🏼

Too many rules for me. I just wanna play with my toy trucks 🤣. Great video explanation though.

Are portal axels allowed?

are the new carbon fiber frames C-1 LEGAL...such as BANGGOOD

Any axle restrictions in class 1 or 2? What classes do portals , ie: Trx4 &Gen8 fit into? I know of some groups that bump your truck up 1 class on account of portals. Ie: build class 2 Trx4, & it gets bumped up to class 3 on account of portals. What are SORRCA rules on portals? Thx in advance for any info. 🤙

@slopppy75

4 жыл бұрын

there is no restriction on portals in any class. You can run in c1 c2 and c3. The biggest drawback of portals are less steering angle and elevated center of gravity

INDONESIA🙌

Nice rc crawler course

@slopppy75

4 жыл бұрын

Thank you

@WilsonsGarage330

4 жыл бұрын

Your welcome well done

that's crazy allowing portals on C1