Love me a dirty D series 😂 Nice seeing you at the wreckers! Collab soon!

@TURBOTRISTO

3 жыл бұрын

Can't wait! I am really gee'd up to do a collaboration , Great to meet you and see you are as cool in person as you are on camera !

@frias2287

Жыл бұрын

Nice one i have eg turbo swap H2BA7

Love the work I've been watching you and because of you I now have a 1996 ek hatchback d16y7 did d16y8 manifold like you and install rev 9 turbo kit runs grate and bye the way be your self who cares about other rude comments your kool dude and give good detail work and your honest

@TURBOTRISTO

3 жыл бұрын

people aren't rude I'm not hating on anyone's comments they guys were right to pull me up on silly stuff i do , my gaol is to make great content and engage with viewers and share knowledge and experiences, thanks heaps for your support Adam

I love this guy! He says I don't recommend driving without a tune, let's give it a full send!

@TURBOTRISTO

Жыл бұрын

Just for you 💚 it still works just would work better if you tuned it

@greedymechanic

3 ай бұрын

@@TURBOTRISTO yeah no tune and still works... on idle or no throttle cruising

I did a WRX turbo on a civic years ago, retained air con, 2.5" turbo back, fmic, tuned with a rising rate FPR and a MSD BTM. Ran GREAT for years no problems never. Spool was perfect around 2500 RPM. Butt dyno says about 180 whp.

@TURBOTRISTO

2 жыл бұрын

Mad that’s what we like to hear

@theedge5584

2 жыл бұрын

Link for rising rate FPR please I can't find one lol.....??????

@CrAzZyTheCodingBoss

Жыл бұрын

@@theedge5584 I haven’t either. Only know about FMU

Old video but I'm subscribing just because of the wholesomeness humbleness and ability to take constructive criticism... This...... This is good content

@TURBOTRISTO

2 жыл бұрын

thanks Drippy , I got thick skin and I love any feed back that helps me keep doing what I love

love your content and it makes me so inspired to start my civic project. thank you very much.

@TURBOTRISTO

3 жыл бұрын

Time to get started Tom! No time like the present

Another inspiring boost application. Gotta say great wrapping down pipe. I would go one step further and wrap the intercooler to throttle body. My build list is almost done but still can't decide on turbo size.

@TURBOTRISTO

3 жыл бұрын

That’s cool man what’s done in your build? Ecu? Built engine? Cam?

Your vids are great, I’ve learnt heaps from watching them and I can’t wait to see what’s in store for your channel👍👍👍👍

@TURBOTRISTO

3 жыл бұрын

Awesome, thank you! Trust me its going to be big alot of cool high end build as well as still doing HEAPS of budget stuff and testing products

Personally I love the content. Honesty goes goes a long way. Respect you and channel

@TURBOTRISTO

2 жыл бұрын

Thanks heaps Gilbert it means a lot

Bro I love u no homo lol. So glad I found ur channel it’s amazing 🙌🏽💪🏽💯 thanks for reading the comments and engaging with your audience it’s important at this stage of KZread

@TURBOTRISTO

3 жыл бұрын

Hahah thanks man I appreciate your support

@ivanjamesjensen3057

2 жыл бұрын

No u.

Love ur vids. Watching from the US in Cincinnati

@TURBOTRISTO

3 жыл бұрын

That’s cool bro happy 4th of July thanks for the support

Thanks for the great work looks great I'm going to do the same just with built bottom end

@TURBOTRISTO

3 жыл бұрын

I would do the ecu first you may not need a built motor

love ur work

@TURBOTRISTO

3 жыл бұрын

Thank you so much 😀thank you brother

Subbed your channel after this video. You interacting with your subs did it for me.

@TURBOTRISTO

2 жыл бұрын

Thanks mate I appreciate it, it means a lot

Good stuff keep it up! 👍

@TURBOTRISTO

2 жыл бұрын

Thanks man

You can rock as much as I need your amazing bro

@TURBOTRISTO

2 жыл бұрын

Haha thanks man! I appreciate you

I wish I lived near you to turbo my AWD DB9 Teggy, well not really near you too many creatures in Australia keep up the good work.

@TURBOTRISTO

Жыл бұрын

Hahaha, I would love to see your car

Beautifully done brother.. Just needed a good tune

@TURBOTRISTO

4 ай бұрын

It sure does

I use a torch and heat the old gasket up on the oil pan. Gets it nice and soft to peel off

@TURBOTRISTO

2 жыл бұрын

Smart thinking man

Watched a few of your videos now, I mainly buy German but have the sudden urge to buy a D16 just to turbo it 🤣🤣

@TURBOTRISTO

Жыл бұрын

Haha that’s awesome I love German cars check out my e30 build

Great work has me dreaming of a del sol turbo build

@TURBOTRISTO

3 жыл бұрын

You can do it man it’s surprisingly easy

@intheclewb2011

3 жыл бұрын

@@TURBOTRISTO it’s just finding the del sol here in Ireland hard to come by a clean one for a good price 😓

@TURBOTRISTO

2 жыл бұрын

its no different here either, most are trashed, if not people want a million dollars for them

Great content my friend. Now you have gotten your self a shop, but you started like a lot of us fix our cars, just a few jack stands and a concrete floor. In some instances dirt floor. No 80 thousand dollars worth of tools. Your videos have give me some hope of turbo my 98 prelude without a tune, just injectors and fuel pump. Here's the quick, it's an automatic. They get a lot of hate in the prelude community because of the transmission. I asked for some advice for a turbo in a prelude chat a while ago, and i thought they were going to come and burn my car by the responses I got. But you give me hope again, just keep it low on the boost, Thanks. from West Virginia USA.

@TURBOTRISTO

2 жыл бұрын

Yeah man you can do it they will all cry when you smoke them in a race! Haha ,

@funnyshoes11

2 жыл бұрын

@@TURBOTRISTO oh man, that would be nice, do you still recommend the T25 you talked about for the H22 or a T3/T4 set up will suffice? Just wondering. More Budget build's would be nice, the civic build's were great man.✌️

@TURBOTRISTO

2 жыл бұрын

@@funnyshoes11 more budget builds incoming this week, for a h22 i would personally put on a gt3076 maxpeeding have a gread turbo in that size and its only a couple of hundred$$$

@funnyshoes11

2 жыл бұрын

@@TURBOTRISTO thanks for answering my friend, i looked it up, and the price for the turbo isn't bad. there's an advantage of water and oil cooled turbo's, i have a F-150 with the Ecoboost engine and has the same system, i read that after you stop the engine, the coolant continues to cool the turbo to stop oil from baking in the bearing's and cause premature failure. Appreciate the advice..✌️

@TURBOTRISTO

2 жыл бұрын

@@funnyshoes11 not a worry my man 🤙🏽🤙🏽🤙🏽

*Fuel pump and injectors a must for any turbo car *i was screaming for you to clean that oil pan I knew it wasn’t gonna weld nice

@TURBOTRISTO

2 жыл бұрын

yeah man I cleaned it a hundred times

Yes cant wait for proper turbo kit for the d16. Bigger is not always better. But my wife says otherwise lol.

@TURBOTRISTO

3 жыл бұрын

Hahaha

@Tasfarmer

2 жыл бұрын

She sure does mate

Let's go down seriessss

@TURBOTRISTO

3 жыл бұрын

Haha yeah boy

@AliMack1

3 жыл бұрын

D series**

Planning on doing this with a rover 213 (civic ef) I'm going to piece my own kit together from scratch after watching a few kits. And a deffo smaller turbo.

@TURBOTRISTO

2 жыл бұрын

great idea man best of luck I hope my videos helped you out

@danielmcginley9745

2 жыл бұрын

funny enough i was thinking of doing this to a r8 shape rover 216 in the UK llol

WATCHIN FROM THE UK, WISH I COULD DO THIS TO MY D14

@TURBOTRISTO

3 жыл бұрын

What’s stopping you

@rsneil81

3 жыл бұрын

@@TURBOTRISTO FINDING THE RIGHT PARTS!

Awsome

@TURBOTRISTO

2 жыл бұрын

this was a fun project

Cool videos cool accent

@TURBOTRISTO

3 жыл бұрын

Thanks Blake appreciate your support

Great D series content! Can you run bigger injectors and aftermarket fuel pump on the OEM fuel rail on the d16y8?

@TURBOTRISTO

3 жыл бұрын

You sure can check out my personal build I’m running a walbro 460 and raceworks 1150cc injectors on the stock rail

@singlecam1892

3 жыл бұрын

Just started my Channel, I’m a bit late but I’m always doing shit to my car and I’ll be posting. I have 450cc on stock rail. I’ll post soon enough

@armandomontero4575

3 жыл бұрын

@@singlecam1892 Cool look forward to watching your channel

@TURBOTRISTO

2 жыл бұрын

still waiting for vids bro :)

Hello from the US, I love watching the D16 content!! I have a 97 Civic DX coupe with the D16Y7. I have been collecting the parts for my turbo build including a Y8 head. I can give a break down of my parts of you want.

@TURBOTRISTO

2 жыл бұрын

Sure man go for it!

@gingersquatch9844

2 жыл бұрын

@@TURBOTRISTO this is what I have so far. Y8 VTEC head, 75mm Wiseco forged pistons, Maxpeeding forged rods, 550cc injectors, Skunk2 pro series intake manifold, ramshorn exhaust manifold, Gt40-10r T4 turbo, 70mm throttle body, 31x12x4 intercooler with 3 inch flanges, Blowoff valve and 50mm waste gate, Walbro 255 already in the tank, dual 3 port control valves for the wastegate and a Speeduino ECU to run it all. I still need to get a cam, flat faced valves, springs and retainers and adjustable cam gear, adjustable fuel pressure regulator and fuel rail, turbo oil and coolant feed lines, monster coils, intercooler piping, wideband O2 sensor kit and a few other things.

@TURBOTRISTO

2 жыл бұрын

@@gingersquatch9844 wow!! Monster turbo monster intercooler piping, monster wastegate -then you have a small fuel pump small injectors and low featured ecu, the fuel system and ecu is good for a small stock sort of set up and low boost like 12-15psi. - your turbo intercooler and wastegate is set up for 40psi and 600hp

@gingersquatch9844

2 жыл бұрын

@@TURBOTRISTO I plan to use a bigger fuel pump and 2250 injectors later in the build, the Speeduino is the 0.4.3 that is compatible with the Teensy micro computer that runs at 600mhz along with having on board micro SD slot for data logging and native canbus support for expansion and communication. I plan to resleeve the block and get a billet crank later and shot for breaking the current record of the D16 at 822.

@TURBOTRISTO

2 жыл бұрын

@@gingersquatch9844 that’s cool speduino is great budget ecu, I know a lot of people that use it

that's a pretty decent outcome for 5psi mate

@TURBOTRISTO

3 жыл бұрын

I was very impressed I would love to dyno it

Best Videos, amazing stuff and most important is Coolest person I have met in australia 🇦🇺. Got advice on my b18c2 spent heaps time and didn’t charge. Such a legend and really a car lover. Respect ❤️👍 Catch up soon 🍻

@TURBOTRISTO

2 жыл бұрын

thanks Shin- you are a champion too , I cant wait to take my mrs to your restaurant

Could you please make a complete turbo kit list for the d16 please? I have a d16y4 ek civic and im looking to turbo it but don't know where to start, or could you link a good turbokit that is inexpensive

@TURBOTRISTO

3 жыл бұрын

I have made several on my channel man look back through the vids one is called tech talk

This is the kind of channel where I watch all the ads so Tristan gets all of the ad money lol

@TURBOTRISTO

2 жыл бұрын

You are the man!!!!!!!!!

hey mate just curious on why you re-located or made a new bracket for the wastegate instead of welding shut the flapper on the turbo side and adding an external gate when the exhaust manifold allows for one cheers

@TURBOTRISTO

2 жыл бұрын

Because the external gate is illegal and the customer didn’t want it, plus the turbo came with a wastegate and he was on a budget didn’t need to spend extra money

Blox makes a map bypass and blox fmu helps a lot 🤙🏻

@TURBOTRISTO

Жыл бұрын

yeah we were experimenting with the budget stuff

Im guessing you would block the map sensor hole, relocate it and get a feed from somewhere else?

@TURBOTRISTO

3 жыл бұрын

Yeah I’m experimenting with that now might do a video on it soon

amazing vid bro! I really want to turbo by d16 but with my strict budget I wouldn't be able to get an ECU or a tune for it. Should i abandon the project or is it do-able with something like a rising rate pressure regulator and more bits? im looking to daily it too with like 7 psi at most maybe 10? any help would be appreciated brother, keep up the NA Civic project loving it!

@TURBOTRISTO

2 жыл бұрын

Thanks man, you can do exactly what I just did in this vid man

Great video!!! However, I have just one thing I have to criticize you about… NEVER allow the pull strings on your hoodie and/or any other loose clothing to dangle like that while peering over and into the motor!!! If one of those strings were to get caught up in one of the pulleys you would be injured for sure. I know that you weren’t hanging all that far down but it’s still a good practice to not allow hanging strings and such. Same goes with metal rings on your fingers, as well. It only takes one time to become complacent and it’s game over!!! I just want to make sure you’re safe, my friend. Cheers from Texas, mi amigo!!!

@TURBOTRISTO

Жыл бұрын

Hey man my little brother lives in Texas ! Yeah you are 100% right it’s a little bit of a trick of the eye one a couple of my videos the strings look like they are really close but I’m 6’3” and when I lean over an engine bay it’s a fair distance away but you are 100% correct best practice is to ditch the strings, like who even pulls the hoodie tight any way?? Hahha thanks for watching mate

Hello I have question on how you did the welding in this video. One, is the plug made of aluminum? Two, what metal is your pan made of? Three, what rod did you use for the weld? I do know aluminum and steel do not weld to one another; so how did you weld the plug to the pan and what rod did you use?

@TURBOTRISTO

Жыл бұрын

It was a mild steel bung on a mild steel pan

@TURBOTRISTO

Жыл бұрын

The down pipe is stainless

Yeeeeee

@TURBOTRISTO

3 жыл бұрын

thanks for the comments and support mate

I need some opinions whether i can turbocharged mazda familia 1.3cc on carburetor system?.

@TURBOTRISTO

6 ай бұрын

You can but it’s a pain in the butt, research draw through carby or blow through carby there is two ways to turbo a carby

Hey Tristan. Would you recommend getting a new turbo setup professionally tuned or will a ecu tune done by myself, assuming done correctly, suffice?

@TURBOTRISTO

Жыл бұрын

Always check it on a dyno with a pro, engines are expensive. And more than the price of paying a tuner, if you have the knowledge to get it running ok then you can cruise it in to a tuner for a check up and fine tune

Why dont you make this fulltime? Amazing work btw keep.it up 🤜🏻💪🏼

@TURBOTRISTO

3 жыл бұрын

That is my goal

@MegaFletch1234

3 жыл бұрын

@@TURBOTRISTO goooood mannnn keep up the work brother .love from the uk 👌🏻💪🏼👌🏻

Really enjoy your content I’ve been learning a lot!, I’m new to boost builds I have a Fully stock 97 CX with a D16y7 I’d like to add this same turbo kit to, question is, would I need any upgraded internals or a trans swap to have it running reliably? Appreciate any info Thank you! 🤙🏼

@TURBOTRISTO

2 жыл бұрын

do not bother with the internals just make sure the compression is even across all cylinders and send it a good tune will be much better than a built engine, in my experience and the experience of two of my friends the 3 of us all had built engines they all blew up not long after building them, i built my own engine and the other two guys paid well over 10k to have motors built and mine lasted the longest, don't build it just tune it and slap the turbo on this car is still running the same set up over a year later and he daily drives the car

@jnino956

Жыл бұрын

Wow that’s opposite of what I was thinking, thanks for the heads up I was almost going to order rods pistons and a cam for the head. I did manage to find a D16y8 head recently for a decent price, I’m thinking of doing the mini me swap and adding boost to that. Appreciate your quick response

hi tristan , i am dani i am in Perth WA , i have ej8 with d16y8 in it and i am actually running similar set up with this turbo set up , same turbo, manifold and probably intercooler kit too, and the question is which downpipe is that, is that fully custom hand made or it’s after market and custom modified to fit? thanks tristan

@TURBOTRISTO

2 жыл бұрын

this down pipe I custom made if you watch the video I show it and mention that I welded it myself, thanks for watching I appreciate the support man

What were those anodized wrenches “new tools” you were using?

@TURBOTRISTO

2 жыл бұрын

They are for AN fittings special alloy spanners so it doesn’t damage the fittings

Any thoughts on adding a twin turbo to a j series?

@TURBOTRISTO

3 жыл бұрын

Maybe one day

Do you have any videos on a boosted d16y5? I’m trying to figure out the difference between boosting a vtec and non vtec

@TURBOTRISTO

2 жыл бұрын

I have heaps on videos on a boosted y8 with vtec

@TURBOTRISTO

2 жыл бұрын

Both have the same results

is there a way to upgrade the brakes to bigger ones from another honda civic that fits?

@TURBOTRISTO

3 жыл бұрын

There sure is check out my over vids

@je6506

3 жыл бұрын

Usually you can use Honda CR-V brakes, but that may not be the case for different models

Ok i have a 1996 honda civic hx d16y5 sohc 5 speed 2door coupe. what all do i need to buy for a turbo to be added

@TURBOTRISTO

Жыл бұрын

You need to watch my videos and they have the answers

Is that a Gen 1 civic i spy? 😍

@TURBOTRISTO

2 жыл бұрын

Yeah man with a b16

What’s needed to turbo a stock Honda other then the kit bov/ wast gate fuel pressure regulator just to run like 7psi like what tuning or chip or do you need timing what’s the cheapest way ?

@TURBOTRISTO

Жыл бұрын

Check out some of my how to videos

Hey Bro, im turboing my d16y4 and i was wondering how n where do u run ur vacume lines for bov, wastgate, fpr, and boost gauge?

@TURBOTRISTO

3 ай бұрын

Back to the intake plenium

I want a sleeper turbo that coppers won’t be able to see do you have any susgestions on kits ?

@TURBOTRISTO

2 жыл бұрын

All kits will do fine, we can cover it in certain ways and paint stuff black ect

where did you get your oil filter relocation kit?

@TURBOTRISTO

3 жыл бұрын

The customer bought it on marketplace , tbh it was junk we replaced all the fittings with raceworks ones the next day as they all leaked

That manifold gives big turbo vibes. I was about to call bs on the no tune thing until I read only 5psi.

@TURBOTRISTO

Жыл бұрын

Yeah man people ask about this type of thing every day on the d series fb pages

7:15 no more scratching around in the dirt for us huh

@TURBOTRISTO

4 ай бұрын

Nah man onward and upward always

Does this thing have a AFR gauge on it? Any idea what the AFR is?

@TURBOTRISTO

Жыл бұрын

Nope and nope, it’s still going strong though

What do you think about putting in rdx 410cc injectors for this engine for 8 psi?

@TURBOTRISTO

3 жыл бұрын

I beleive the d16y8 has bigger injectors or bseries have 240cc injectors these have 190cc

@TURBOTRISTO

3 жыл бұрын

410 would be great

So im interested in parts that u linked in the vid sig! But how does this work since id be ordering from usa and need shipped to the usa? Is the pricing on maxspeedingrods prices in usd? Any help is. Appreciated

@TURBOTRISTO

2 жыл бұрын

They have the same parts on their usa site if you check newer vids of mine there are newer links My man

Did you use a K series slave cylinder to clear the turbo intake?

@TURBOTRISTO

2 жыл бұрын

Nope stock

I have a bone stock 98’ ex 66k miles and has a d16y8, but I’m debating to keep it stock or to mod it :(

@TURBOTRISTO

2 жыл бұрын

Always mod it

Love your vids! Im currently thinking of adding a turbo to my 1.6 sport ep2 civic, i want to use a TDO5HR-16G6/10.5T does anyone if this is possible and if so how i would get my hands on the manifold?

@TURBOTRISTO

3 жыл бұрын

I haven’t seen a turbo ep2 that will be cool man

@kutlee2009

3 жыл бұрын

I have td05hr 16g 1.0.5t on my d16 motor. No body makes a manifold. So I made one and I kep AC. It's a tight fit but it can be done. It's twin scroll, decent sized turbo.

@tristansmith7512

3 жыл бұрын

@@kutlee2009 i have no ac due to radiator breaking so i have a bit more room to work with, but sounds like its a custom manifold job then

@TURBOTRISTO

3 жыл бұрын

@@kutlee2009 that is soo cool man I’d love to see the set up

Hey man are you any good at welding? Is it possible for me to give you the flange and piping and for you to just put it together for me?

@TURBOTRISTO

3 жыл бұрын

sure that depends what you have and need done but i can confidently weld stainless steel and some mild steel I use a tig

@lucaspaulina9727

3 жыл бұрын

@@TURBOTRISTO that’s great man. Love the work, I’ll let you know as soon as I get all the parts

Nice, I got 93 hatch with a d16y8 I wanna turbo

@TURBOTRISTO

Жыл бұрын

go for it man

Hey any chance when you got boost did it like bog or lose power ?

@TURBOTRISTO

Жыл бұрын

No it ran fine and still does the guy daily’s it

My friend wants to get a little more power out of his subaru legacy 2.5 without doing a turbo or ecu upgrades, could I use a small supercharger or is that dangerous, it says it's for 2.0 to 3.5 litter engines. Can I do what you do and just keep it a single bolt on. Thanks.

@TURBOTRISTO

Жыл бұрын

there isnt a lot you can do if you dont want to do the ecu. i would tell him to buy a new car if its too slow,

@TURBOTRISTO

Жыл бұрын

sunbarus are unreliable at the best of times

hey was wondering if you know of anyone in qld that can do turbo installs and tuned for d15z4?

@TURBOTRISTO

2 жыл бұрын

Nate lavender

@gasgasmedia3283

2 жыл бұрын

@@TURBOTRISTO sweet as ill give em a look up thanks heaps legend love your videos

Are you notching the block for those rods

@TURBOTRISTO

Жыл бұрын

It’s stock bro

That turbo blanket was confusing to me at first when I installed my owns as well and the springs weren't quit long enough it was ordered from modern automotive performance

@TURBOTRISTO

2 жыл бұрын

Hey man thanks for watching if you want some forged rods for your eclipse I am giving some away in the next couple of weeks

@3geclipsebuiltperformance883

2 жыл бұрын

@@TURBOTRISTO dude that is awesome bro what length I'm looking to do AWD 2.1 Lust be 162mm with 4g64

@TURBOTRISTO

2 жыл бұрын

these will be for the stock 4g63 but forged and balanced

@3geclipsebuiltperformance883

2 жыл бұрын

@@TURBOTRISTO nice man

What’s the manifold in the picture?

@TURBOTRISTO

Жыл бұрын

Elusive

Could you run AC with a setup like this? I would like to do between 5 and 7 lb and still keep air conditioning

@TURBOTRISTO

2 жыл бұрын

Nah man not really

@ivanjamesjensen3057

2 жыл бұрын

If you are a master pie cut welder with lots of time it will fit. Piture 500 grapefruit slices welded together but the shape it has to be still kills flow. Too expensive to pay someone for that downpipe. Once it fits you still don't hv great workjngba/c u gotta run pusher fan . And flows killed

Any idea on how much power it makes without a tune ?

@TURBOTRISTO

Жыл бұрын

No clue I’d guess around 120kw at the wheels max

Where are you in Australia man I want you to work on mine when you have the chance

@TURBOTRISTO

2 жыл бұрын

I’m in Melbourne mate

Currently looking at this turbo, how has this turbo treated you? Would you recommend this turbo or not? PS: Might leave this same comment on a few of your videos regarding this turbo lol

@TURBOTRISTO

Жыл бұрын

Turbo works fine it’s been nearly two years it’s still going strong

Needs an external waste gate vented to atmosphere ;-)

@TURBOTRISTO

3 жыл бұрын

Yeah it does but not in Australia, this is a sleeper and in Australia you get pumped for that stuff

Hey nice vid confused I thought larger injectors and fuel pump were a must with d series turbo instal ? I hv a d15b vtec and all the turbo parts thought I couldn't put it on until I get injectors and fuel pump *** important anyone know pls****

@TURBOTRISTO

2 жыл бұрын

You can just run really low boost and don’t thrash it

@TURBOTRISTO

2 жыл бұрын

But I don’t advise it

@ivanjamesjensen3057

2 жыл бұрын

Ok thanks ya injectors and engine management/tune are looking to be the most expensive part of doing this by far

Bought a 98 civic with a d16y7 and ordering a turbo kit off max speed is there anything you can tell me I’m going to run into I’m not sure of absolutely everything I’m going to need and can’t find a complete parts list first time boosting anything🙏🏼

@TURBOTRISTO

2 жыл бұрын

i did a video that has around 300k views it tells you everything about the kits and how they work, I advise you to take all the fittings and hoses to a performance parts shop and replace them with high quality fittings other than that you cant go wrong

@austinleonard7766

2 жыл бұрын

@@TURBOTRISTO know anyone I could get a base tune from not trynna spen 4K lmao it’s gonna be a good budget build I already have an extra d16 and a 5 speed just gotta save and buy kit and other tinkets

@TURBOTRISTO

2 жыл бұрын

@@austinleonard7766 a base tune for what software

Wasson on man sick as videos just wondering I’ve got a d14a4 non tec and I’ve put a turbo on it what’s the best I can do without a tune to keep it safe ? Cheers man

@TURBOTRISTO

2 жыл бұрын

Good fuel pump and fuel rev low boost under 7psi and send it

@TURBOTRISTO

2 жыл бұрын

Gap the spark plugs to 0.8mm

@georgeclements7530

2 жыл бұрын

@@TURBOTRISTO sweeet as I appreciate it you got Facebook so I can show you a couple videos ?

@georgeclements7530

2 жыл бұрын

@@TURBOTRISTO I’ve got a 4 psi wastegate spring and a Manaul boost controller set as low as it can go she runs sweet still need to fit the oil pressure gauge and also have another coolant temp one. Boost gauge is hooked up and working

@TURBOTRISTO

2 жыл бұрын

just search tristan ostara im the only one on earth

Will this work on a D15? I just got a 93 Del Sol and I want to turbo it. Is your kit available to buy yet?

@TURBOTRISTO

Жыл бұрын

Yes sure will

I just finished my turboed vtec built z6 but im waiting for the tuner to be available, I know you said he is running the car for 2 years no issues would my build be fine on stock ecu and fueling for about 2 weeks or is the change in compression going to cause it to run way to lean? Can you tell if anything is going wrong while driving? I really want to drive the car while I wait but I am scared of blowing up the engine

@mastercrasher9680

Жыл бұрын

Was told its fine because I have an external boost controller set all to the lowest setting but am still nervous

@TURBOTRISTO

Жыл бұрын

depends what wastegate spring you have and what spark plug gap you have and what your fuel pressure reg is set at, i would say if you are sensible with your driving it will be fine

@mastercrasher9680

11 ай бұрын

@@TURBOTRISTO ah thank you so much! I left the springs that came with the turbosmart wastegate so i’ll probably take them out for now because I believe its one 14lb spring, Ill probably baby it around for now. Ill keep a close watch on the fpr

Hey turbo Tristan, I have bought a d16 turbo kit and running it on a stock ecu I only want the flutter and I took it for a test drive and it made the noises I wanted, I know u said u don’t recommend driving it on a stock ecu but if I daily drive it once and a while to uni and back will it be alright? This is only until I get my proper ecu still saving for it but I really wanted to hear the turbo flutter not trying to push it all they way sorry if I sound like a noob 🤓

@TURBOTRISTO

3 ай бұрын

If you run less that 5 psi and crank up the fuel pressure it should be ok ish

@Christian-ml5pw

3 ай бұрын

@@TURBOTRISTO how much fuel pressure should the regulator read then

@TURBOTRISTO

3 ай бұрын

@@Christian-ml5pw I would put it at 50psi base pressure

Hello pls help! I have a 3.5 Chrysler NA car. I wanna turbo it. Stock 250hp I want it to be 300-320. What kind of turbo I need at 3-5psi to make 50-70hp. I don’t want more power because I’m scared blowing my car up thanks a lot

@TURBOTRISTO

9 ай бұрын

Hello mate, there are a million more things we need to know first. If you only want a little bit of boost really any basic turbo will make boost, but I would need to know what type of budget you plan on doing this with and how you plan on tuning the car, who is doing the install and what manifolds and lines and intercooler pipes ect you want to use, I would suggest going in to your local performance fabrication and mechanical shop and talking to them before buying anything

@venmorcosmetics

9 ай бұрын

@@TURBOTRISTO thanks 😁

Is it’s suitable if u do this and it’s your daily

@TURBOTRISTO

2 жыл бұрын

It’s this guys daily so yup

How much do you Charge to our one these together

@TURBOTRISTO

9 ай бұрын

Not including parts the labor alone is 2500minum

Hi Tristan I love watching all your videos and I would like to contact you cause I have an EK hatch d16y4 here in Melbourne. pls let me know.

@TURBOTRISTO

2 жыл бұрын

Sure what’s the issue?

@TURBOTRISTO

2 жыл бұрын

Do you want to turbo it?

How did you keep the psi from going higher?

@TURBOTRISTO

Жыл бұрын

Adjust the wastegate

I kid you not I’ve watched all your d16 turbo videos at least 10 times per vid in the last week bc I’m about to turbo my Honda and am worried im going to mess something up

@TURBOTRISTO

Жыл бұрын

Man you can’t mess it up it’s sooo easy, where are you based? Comment any questions you have on the videos and I will do my best to answer asap

@JensonMadsen

Жыл бұрын

@@TURBOTRISTO based in America. any thoughts on running this setup with a fmu (rising rate fuel pressure regulator) and a wide band to make sure I’m not running lean? Got everything ready for boost just need to pick up a couple silicone couplers and a feed and return line.

@TURBOTRISTO

Жыл бұрын

perfect plan mate better than this thats for sure

@JensonMadsen

Жыл бұрын

@@TURBOTRISTO that makes me feel a lot more confident! That’s for all the content man wouldn’t have the confidence of it weren’t for you

@TURBOTRISTO

Жыл бұрын

happy to help

What fuel injectors are you running?

@TURBOTRISTO

2 жыл бұрын

Watch the vid mate it’s all stock

Do you only turbo Honda's, I'd like to turbo a 4ze1 , however I'd like to retain the auto

@TURBOTRISTO

7 ай бұрын

I’ve turbo’d nissans and Toyotas on my channel

@lorrainegladman387

7 ай бұрын

Can you do a 4ze1,for the mini truck people

@TURBOTRISTO

7 ай бұрын

@@lorrainegladman387 I don’t have one or the mini truck to go with it, I’d love to do a 3rz one day

@lorrainegladman387

7 ай бұрын

I do!

How is ur fuel ratio at 5psi whit out tuning??

@TURBOTRISTO

2 жыл бұрын

lean most likley

Like number 66!

@TURBOTRISTO

3 жыл бұрын

yeah boy!!

Done auto T d16 noV for now .. can the ek subframe also work on d16 or only the eg . Maybe one day k24 or h22 . If i have to get both i dont care. I need a subframe for the d16 is four door that matter ? dont tell noone lol delete this when u read it .. thought i emailed you a while Back but cant find it ..

@TURBOTRISTO

6 ай бұрын

an integra dc4/dc2 or an EG subframe are the best for a kswap, but the stock ek subframe is perfect for a H22/b18 /b20 swap

@motivationaltwist7026

6 ай бұрын

@@TURBOTRISTO ok the ek subframe is what i need if thats for d16 . looks like if do even a stock pull shits going down lol

@TURBOTRISTO

6 ай бұрын

@motivationaltwist7026 stock subframe is fine for 2000hp as long as the engine mounts and axles can cope hhhaa only reason you would change it is to run a Kswap

@motivationaltwist7026

6 ай бұрын

@@TURBOTRISTO ima link u on ig now and show u the subframe

All you need is ecu and you will feel the power i swear😈😂

@TURBOTRISTO

Жыл бұрын

100% man I know I tell people all the time, but funny an ecu is not in most people’s budget for some reason🤷🏻‍♂️ fun fact the car has been daily driven now for two years still going strong

@gamex9288

Жыл бұрын

@@TURBOTRISTO yes ecu a little pricey and of course tune for best drive love honda🫶🏻❤️

If thats a journal bearing turbo you need to open up that hole to a 3an, you'll starve that turbo of oil

@TURBOTRISTO

3 жыл бұрын

I’ll look into it thank you major

Did you keep the catalytic converter? Will keeping it in ruin the turbo?

@TURBOTRISTO

Жыл бұрын

yep still kept the cat, no it wont kill the turbo, we have to run them in australia

@descolero1

Жыл бұрын

@@TURBOTRISTO Thank you for the info and the fast reply. 🙏 Glad I subscribed

@TURBOTRISTO

Жыл бұрын

you are welcome buddy, im currently putting a full exhaust on my turbo kswapped civic with a cat

@descolero1

Жыл бұрын

@@TURBOTRISTO wow I'm looking forward to watching your videos I'll be checking on your channel. Thank you.

@descolero1

Жыл бұрын

@@TURBOTRISTO daym those welds look clean! I really like the colors.

Just to bring up the turbo sizing on the d series, I agree a td04 is the perfect size, but in my opinion, anything smaller isn’t really toooo worth it. it then become an issue of lack of flow/ boost output, td04 is probably the smallest turbo that will happily boost along the mighty Y4 for days. However the bigger version From Subaru the vf35? Or someshit would absolutely shit on any size eBay turbo, they’ve got the balls to boost up high & keep flow at any rpm/ speed, they’re also very responsive! But I’m pretty sure they’re not too cheap anymore, bang for the bucks can vouch td04 +1, however personally what I found with the td04 having a smaller diameter it runs out of juice in 4th/5th gear, wouldn’t be ideal for roll racing but still gonna chop fools

@TURBOTRISTO

3 жыл бұрын

agreed Robbie, Chopping fools is what its all about

@webkikif

2 жыл бұрын

Great now teach me how to put it in l

@Thechildishmandingo

2 жыл бұрын

VF35 is gonna run outta steam around 350hp. My eBay GT3071R in my b18 spooled similarly to a VF39 but was good to almost 500. Never ran into a subie that could outrun me including my own STi.

@ivanjamesjensen3057

2 жыл бұрын

Uhh so jelous ! I wanna chop fools ! And stay rocking my 1.5 litre badge

hello what is this manifold ? not simple for me to understand,i'm french and i use translate,but some time the translate is not good for 1 or 2 words,it's ok,i can understand but for technical words it's crap. so can you tell me the exact model for this manifold and the exact model for th turbo ? this manifold,is it reliable,or is it better to have cast iron ? thank you

@TURBOTRISTO

7 ай бұрын

Thanks for watching stef, this manifold is from PLM it’s called a low mount ramhorn manifold

@StefNefast

7 ай бұрын

@@TURBOTRISTO ok thanks For performance it's better than the other,but what about broken with the weight of turbo ? The welds can keep in a long time ?

@TURBOTRISTO

7 ай бұрын

@StefNefast this car is still going strong

@StefNefast

7 ай бұрын

@@TURBOTRISTO thank you With your videos i learn to turbo a D16. In my case it's a D16A9 in a rover 216 gti 16v.

@TURBOTRISTO

7 ай бұрын

@StefNefast awesome car man