The process I use to get my SS Brewtech Conical Fermenter all nice and shiny using CIP, Clean In Place
Жүктеу.....
Пікірлер: 14
@CanadianBrewingChannel5 жыл бұрын
Great video! I am looking at purchasing a Conical fermenter.
@andvil013 жыл бұрын
I would 1. Cold water from tap. Open to drain. 2. Warm water from tap. Open to drain. Now all dirt you can see is gone. 3. Circulate caustic or dishwasher detergent to get what you can't see. Warm. Can be reused for the small stuff later. 4. Warm water rinse. 5. Cold water rinse with acid. Starsan. 6. Rinse if neccesary.
@toryingle64716 жыл бұрын
How has the Harbor Freight pump held up after a few months of use?
@shanewalters78216 жыл бұрын
Why not just take the elbow off the bottom under the sight glass and place the bucket under that. You can soak the elbow and butterfly valve with the parts you mentioned later. Then no need to worry about return. It should all dump out of the bottom as fast as it's pumping it back through. Just mentioning it because that is how I do it and works well. I just leave it run and forget about it for an hour.
@TheeMattSmith
6 жыл бұрын
Shane Walters Good Idea! I’ll have to try that.
@berzoidberg3272
4 жыл бұрын
@@TheeMattSmith Did you try it? :P
@dantiel925 жыл бұрын
do you have the pump reference?
@Aske34005 жыл бұрын
Hey buddy.. How big is your flowrate on your pump?
@TheeMattSmith
5 жыл бұрын
Not sure on the flow rate, it’s a 1/4 hp submersible pump from harbor freight.
@jolsonyee43606 жыл бұрын
Hi, what make and model is that pump?
@TheeMattSmith
6 жыл бұрын
Jolson Yee It’s a 1/4 hp Drummond from Harbor Freight.
@metaltim5 жыл бұрын
No concerns of your pump getting clogged with all that nastiness coming out? Seems like you'd need to do a quick manual clean first, then run the PBW cycle. I hesitate to believe it can really get clean when it's recirculating that totally filthy water.
@TheeMattSmith
5 жыл бұрын
metaltim I Know right. But it really does get that clean with that warm PBW cycle. It does get a warm clean water rinse after and then a a Sani Clean cycle after that. The only gunk issue is that some larger chunks do get stuck in the spray ball from time to time and has to be backflushed.
@oldschoolman1444
3 жыл бұрын
You can put a mesh bag around the returns to catch the chunks.
Пікірлер: 14
Great video! I am looking at purchasing a Conical fermenter.
I would 1. Cold water from tap. Open to drain. 2. Warm water from tap. Open to drain. Now all dirt you can see is gone. 3. Circulate caustic or dishwasher detergent to get what you can't see. Warm. Can be reused for the small stuff later. 4. Warm water rinse. 5. Cold water rinse with acid. Starsan. 6. Rinse if neccesary.
How has the Harbor Freight pump held up after a few months of use?
Why not just take the elbow off the bottom under the sight glass and place the bucket under that. You can soak the elbow and butterfly valve with the parts you mentioned later. Then no need to worry about return. It should all dump out of the bottom as fast as it's pumping it back through. Just mentioning it because that is how I do it and works well. I just leave it run and forget about it for an hour.
@TheeMattSmith
6 жыл бұрын
Shane Walters Good Idea! I’ll have to try that.
@berzoidberg3272
4 жыл бұрын
@@TheeMattSmith Did you try it? :P
do you have the pump reference?
Hey buddy.. How big is your flowrate on your pump?
@TheeMattSmith
5 жыл бұрын
Not sure on the flow rate, it’s a 1/4 hp submersible pump from harbor freight.
Hi, what make and model is that pump?
@TheeMattSmith
6 жыл бұрын
Jolson Yee It’s a 1/4 hp Drummond from Harbor Freight.
No concerns of your pump getting clogged with all that nastiness coming out? Seems like you'd need to do a quick manual clean first, then run the PBW cycle. I hesitate to believe it can really get clean when it's recirculating that totally filthy water.
@TheeMattSmith
5 жыл бұрын
metaltim I Know right. But it really does get that clean with that warm PBW cycle. It does get a warm clean water rinse after and then a a Sani Clean cycle after that. The only gunk issue is that some larger chunks do get stuck in the spray ball from time to time and has to be backflushed.
@oldschoolman1444
3 жыл бұрын
You can put a mesh bag around the returns to catch the chunks.