When I went to high school in 1978-1981 we all had sweet rides. My 1970 Monte Carlo and my 1970SS Nova with a 327 balanced and blue printed 4 speed 4:88 12 bolt was wicked fast. My good buddy Higgy had a 1923 Bucket T with a Richard Petty 1966 NASCAR prepped 426 H-Bomb ! UN fucking real! He had dual Doms tunnel ram. Triple titanium valve springs and a monster solid lift cam. He would ring that thing 10G's with no float. That thing was un fucking real! We'd be cruising 50 mph going up to the Bend all quiet enjoying the day. There would be 7 cars in front heading to the beach like us. Without any warning Higgy would pull that slap stick back into second pull out to pass with on coming traffic and in one heartbeat we would go from 50 mph to 150 mph and pass all 7 cars with room to spare. The only ride that had that kind of jam was my brothers GT-500. Hemi Trough was through the roof! Inside joke. Well those were the days. Always had a gun with me at school. Good times.

@Cheops2112

7 жыл бұрын

gary gibbs ...sure you did....

@pf9562

6 жыл бұрын

gary gibbs hemi rules !

This is where an engine becomes a work of art...

One hell of a beautiful car!

one of only a few motor builders that i heavily respect

Nelson has a 441 sbc making 2500hp and 2000ft/lbs, that's pretty impressive. 347HP/Liter. This engine in the vid was prob just a mild set up. I'm sure Tom could get a lot more out of it if the customer was requesting huge HP. I bet this is a very street friendly engine too and went into a street/strip car

The "Alien Elephant" From the fist issue of "Engine Masters" to this and beyound, so much respect for Tom is abilities. Thanks Tom you the man.

IMHO Tom Nelson is the top engine builder in the world . Hand built cutting edge technology and built right here in the U.S.A

@Conhemi

8 жыл бұрын

+mpadil You might wanna look outside the continental united states before you make that assumption mate!! Nelsons are awesome in their own rite but there are some pretty awesome engine builders out there boss.

@coloradokid808

7 жыл бұрын

Aussies always think they are the best at everything. Gimme a break roo boy.

@MrMikey1224

7 жыл бұрын

He doesn't build the engines, his guys do.. he is just the company owner and he sucks at that, look up the complaints he has against him..

@dieseldog00

6 жыл бұрын

The name Steve Morris ring a bell to you? He builds up to 5000hp maybe more.

I love to see them do a Hemi that would fit in a 2006 300c srt8 need a bigger motor for my car to get up an run.

@dieseldog00

6 жыл бұрын

I have an 06 300C with the 5.7. My dream is 1000hp with a 3.6 Kenne Bell.

@tremaynegadsden270

3 жыл бұрын

I'm a 06 300C owner as well and while all the other Mopar owners running out to get the 392 or the 426. I want this beast under my hood.

lol i thought he was going to touch it with his index finger for a second

The black hard coat anodize looks great! Awesome engine! If I ever get the $ I will send you my 572 to "upgrade" ! Your billet parts look fantastic!!

Big displacement engines don't need that RPM to make power. As a matter of fact, they run best at lower RPM, especially if the stroke is long.

I never saw so many trolls on a KZread channel. Seems like there are always haters around to piss on other people's parades.

that's an awesome build, just imagine what's on the inside!!!!

Beautiful! I want to work for a great company like this one. Thanks! For the great views.

I think you mean that it looks like an Elephants Trunk... Not Tusk... LOL

thats the nicest looking motor i have ever seen!!!!!!!!!!

that thing looks like a killer!! OMG Tom you are the engine master!!

im a engine buider to but i build mine in the backyard and they still run just as fast as his engines do

Looks like the monster in Predator movie! Bad ass!

but you need to turbo it to get those numbers, and turbocharging makes it use more fuel(not always), so by the time you get those numbers it'll use as much gas as a V8.

So how high will it rev if you let it? That was over 6000 and going fine.

5:43 what happened to the oil pressure over 6k RPM? Pump failure? oil foamed up? or sump ran dry?

That kind of engine is great for the 1983 Dodge Diplomat as long you change the automatic transmission with a racing shifter.

Also, this engine is only 1600hp on race gas. it has 1250 on pump gas

So when do we get to see this 1600hp monster?

My cheque book is on the table! How much and who do l send it to?

Single plugs and wires? Kinda old school I would say,but the rest is crazy cool.

Now the question is...what do I have to do to the rest of my drivetrain so it won't blow up behind this beast?(!)

Hey Tom, How about one of these in the next proto street racer that goes after the Bugatti quad turbo W-16. If you had a 4 valve DOHC head for the hemi it would be unstoppable.

I didn't realize gas would not ignite when in contact with red-hot exhaust.

The turbo outlets arent symetrical like all the rest of your motors?

With most of those big motors more boost doesn't make more power. More CFM's do because its about how much air you get not how much pressure the air has. Its better to have a big turbo running low boost on those then a smaller turbo running high boost. because high psi means more air friction that means more heat and heat kills power.

You should try long tune headers

why not? just add a tunnel ram to smooth out the runners and it'll peak way up there :)

i'd like to see this in a 68 Dart

@nflores5433

3 жыл бұрын

Can't wait for income tax.

@DeAdiSSu3 They never made them. They made 2 nonworking models. It was around this time that nascar banned the cammers so Mopar never pursued it any further. They were going to supposedly make 750 horses though.

If it's peaking at under 6K on both HP and torque, why push it any higher?

Added diamond coded Chrome header material heat resistance.

damn check out those turbo manifolds they are screaming

that's a bad boy,with a big boys toys price.

Need this in my 70 Plymouth

but what will it fit in?

Son to dad - "Daddy, what's VTEC?" Dad to Mom - "I know he is 5 years old Samantha, but it's never too late for an abortion"

850 ehp × .85 drivetrain loss = 722 rwhp. The majority of the mammoth kenne bell superchargers do that for undet 10k on most modern muscle cars. Kenne bell cobras are pushing over 1000 rwhp with 4.2l superchargers. Good effort but kenne bell is hard to beat when you compare hp/$.

are these for sale and if so how much... not including shipping. i will come pick this baby up! thanks.

@TheFluffyWendigo

9 жыл бұрын

ehh prices ain't cheap go to nelsonracing.com around twenty grand

You put this motor in a tube chassis Duster and you guys would have the fastest street machine in America. Even faster than that 6 second turbo Nova. And from what I can hear of the motor in this video it sounds like it would be pretty street able.

Power is power, no matter how its made.. And more than likely people are going to take the torque curve of a turbo engine than a N/A engine..

I'm just wondering, with this configuration, what car would it fit in?

@sixtiesforever1966 My brother owned a 1969 that my father purchased new from the dealer. Paid $3,800 I believe. So Hemi 4speed with no special bells or whistles. Dyno numbers were 610. Reason why it was quoted so low by the Magazines back then, was for one reason only, " Insurance purposes" That's what has been said by countless Mopar people since.

@DeAdiSSu3 They had them planned back in the mid 60s to fight the ford cammers.

WOW!!!! Look at those billet plastic zip ties holding the plug wires together so you can have free cross-fired ignition. WOW!!!! Billet spark plugs. Billet rust inside the thermostat neck. WOW!!!!! Billet glass packs LOL WOW!!!!!! WOW!!!!! WOW!!!!!! Running that rusty blocked engine indoors is cool too WOW!!!!! WOW!!!!!

@kanukster

8 жыл бұрын

It's aluminum. Since when does aluminum rust...? Oh, your a butt hurt chevy gal.

@jimdavidson5208

8 жыл бұрын

Sorry, corrosion or oxidation for aluminum. Still the block and ALL the internals are corroded. Watch the video and see for yourself.

@raybiondolino9778

7 жыл бұрын

jim davidson you're an idiot

@raybiondolino9778

7 жыл бұрын

jim davidson no corrosion I could see, put your crack pipe down

@doktorbimmer

7 жыл бұрын

Yeah but I can see the leaky POS headers

will this motor fit in my 2008 Chrysler aspen?

is that better then gm 572?

Hope that's Wally oil in there ??

I agree, just V8s sound tougher(IMO).

would have liked to have this motor in my ram

I want this in my 2000 Dodge Ram 1500 Quad Cab right meow!!

Actually pretty mild.....idles at 900rpm....only cranking it to 6k......even the mild tune should put a decent A body low 9s....high 8s....nice!

Awsome!!!!!!!!!

Yeah can the owner tune this? Its enclosed.

The headers must be made of Krell metal!

No other motor like the Hemi

i don't find fwd fun myself, if you can that's awesome

That plus the difference in torque.....

should ceramic coated the headers black...

@snakeoil24 The only other motor that I can think of is a ROTARY Engine small & very light weight producing 2200 horse power!

Where can i buy this?

How much would that cost me? Can u put it in a rock bouncer?

2jz motors are fn awesome so strong straight from the factory could get like 10 lbs boost no problem

wicked!

haha like a country cruiser he says. I need to win the lottery.

I don't know if that should be happening or not 1600 horsepower are not I've never seen a pair of headers get that red hot before never

They would gladly take your money for only 46,000 dollars this engine could be yours :P

True, all respect to imports as well, but there is one little difference between a big blcol 1000HP car and a 3liter 1000 car, drivability ;) and hey now.. FWD can be LOADS of fun ;)

Is there even a ricer argument against this engine? i mean if there is, what ever their smoking, i want 2 of it!

nice

Badass

el mejor motor del mundo

Yes for people who can afford to play with big guy toys

NutZ power..... but fun!

Say something bad about the GTR.

will this fit in my Neon? Lol

Anyone spot all the exhaust leaks at 00:41?

@smokintirec1048

8 жыл бұрын

+The real doktorbimmer yeah bad welds

@Ghos7Devil

8 жыл бұрын

nope just sweating horsepower

@doktorbimmer

8 жыл бұрын

Looks nice... But not very efficient.. obsolete engine design..

@coloradokid808

7 жыл бұрын

Its made just to go fast ,something you don't understand. Read popular science instead.

@doktorbimmer

7 жыл бұрын

+pat mcgeugh Don't know much about engines do ya kid?

Is this really worth 42 grand?...

Put this in a Dodge Avenger. Go see OKC boys.

I agree a rotary is amazing but how do you get excited about a wankel?

where's all the my BBC,Supra,Ricer makes more power comments????

Every penny.

i agree paint a elephant on it and call it that! or the phat wallress

تبيعها حقي؟

Would like to drve next to a prius and watch the owner cry

But wait, they are actually building their own engines now.............. And if you act in the next 5 minutes they'll even throw in a free set of internal block and head rust remover.

dear santa.

@AutomotiveAficionado 3 leters AMG

@snakeoil24 Excited B-cause smaller,lighter and if you go.. "horse power to weight ratio" with all this power like in the video here & to be able to go 6 secs. or better in a quarter mile, I think that's impressive don't you! Don't get me wrong, I'm a MOPAR guy & love...HEMI Engines, I have a 69 Road Runner w/one. I know this much...Power + Lighter = FASTER wouldn't you agree! Nelson working w/rotary engines...Imagine the possibilities.

wow suck low boost, woulda like to see higher psi, but if its just break in then i understand

and it better come with a hell of a head job!! for $42,000 and blow me away

Well, Iwould understand you being able to afford it if you were the real steve martin

@pinatacos who cares you wanted power right ?

but can you drive it across country? That is the point of these engines. Ridiculous power with 100% streetablity.