Chinese Mini Excavator: Switching control pattens from ISO to SAE
Mini excavators come with International control patterns US excavators usually use SAE controls
Жүктеу.....
Пікірлер: 30
@davidstone9928Ай бұрын
Thank you very much! My conversion went just as you described. You saved me a lot of time! I’m an instant fan!
@RustNRestoration6 ай бұрын
Great video! We did this with our 1976 backhoe (wasn’t as accessible as this😢!) as it was ISO and not SAE, I prefer SAE as it feels like you have more control, most modern machines now have a switch that you can change between iso and saw👍
@richarddones40115 ай бұрын
Many thanks for all your help on my Mini Excavator. I've learned lots. Never did like the ISO pattern and now I can stick to the SAE. Keep up the great training you have provided.
@andreyka644 ай бұрын
Just bought an AGT DK12 and your videos are incredibly valuable. Thank you
@pigthesidecardog74426 ай бұрын
Another good video. Thanks Cam👍
@thegarageconnection
6 ай бұрын
Glad you enjoyed it
@nicholasproietto25006 ай бұрын
My John Deere 2025 R has SAE controls. I'm toying with the idea of buying one of these little excavators just to play with. Good to know to change one to SAE controls.
@steveyuhaus58116 ай бұрын
Love the control trick I just did it to my machine awesome keep up the good work
@fixingstuffwithjonathonduk22582 ай бұрын
What size are the hydraulic fittings ?
@ericjohnson90806 ай бұрын
Thanks for these videos on the mini. I am planning to buy one of these. Question. Can this boom swing? I know this is not power swing. But is it hinged so I could fab some bars to lock it into the swing position?
@thegarageconnection
6 ай бұрын
It does not
@HughL.JRMills3 ай бұрын
Is a manual available for these machines? I have a FF13
@RobertCowan-op1mg2 ай бұрын
I have recently purchased a MIVA VA13 FROM WHAT I CAN TELL IT LOOKS IDENTICAL TO YOUR H12. I HAVE SOME SLOP IN THE SWIVEL THIS IS A BRAN NEW MACHINE. THE STOP APPEARS TO BE BETWEEN THE DRIVEN GEAR AND THE DRIVE MOTOR. I'VE TRIED TO TIGHTEN THE BOLT ON THE GEAR DO YOU HAVE ANY INDICATION HOW THE DRIVE HERE IS ATTACHED TO THE MOTOR? OR IF THIS IS NORMAL. ALSO YOUR HYDRAULIC FILTER AND COOLING SYSTEM APPEARS TO FIT THIS MACHINE AS WELL I'LL BE LOOKING INTO THAT IN THE FUTURE
@travisdenney57374 ай бұрын
Where did you buy this machine?
@DiggerDaveSea6 ай бұрын
Thank you, I really appreciate your videos. When you do you mods please include information on the specific parts you use and how to source them. I am having a tough time finding JIC 8L fitting for my alt hydraulics.
@thegarageconnection
6 ай бұрын
8L is a DIN fitting with a 24 degree flare, JIC is completely different.
@danielwiley579610 күн бұрын
How did this to mine and it caused the machine to bog light crazy when extending the Dipper arm as if the spools are different
@ricktanguay2310
23 сағат бұрын
I switched the hoses on mine and also got a very dangerous motion on the boom and stick controls. At first, the dipper cylinder appears to be laboring and then all of a sudden it jerks down and almost flips the machine over. Any ideas?
@pigthesidecardog74426 ай бұрын
Cam I bought a agt lrt23 skid loader. Could you buy one of those and do videos also? Haha. Its actually another great machine. It was 6500 delivered to my driveway. I have a couple attachments for the H12. I will have comments for that video. looking forward to it.
@thegarageconnection
6 ай бұрын
Yes I can
@luisduenas37186 ай бұрын
Vicsec VC15 Hydraulic Excavator is it similar to your machine? I just ordered one and want more info
@thegarageconnection
6 ай бұрын
Very very similar yes
@josephmiele4780
6 ай бұрын
Great video cam. You should start selling upgrade part kits.
@WorldofTanksLaPoop6 ай бұрын
do you talk about parts availabilty?
@thegarageconnection
6 ай бұрын
Upcoming video on this subject actually
@steveyuhaus58116 ай бұрын
Your videos are excellent have helped me out a lot with my mini I do have a question for you where should the oil level be when the machine is cold in the glass I for the hydraulic fluid
@thegarageconnection
6 ай бұрын
All cylinders compressed it should be about half way
@steveyuhaus5811
6 ай бұрын
@@thegarageconnection I guess I don't understand all cylinders compressed is that running or not or I don't understand
@thegarageconnection
6 ай бұрын
@@steveyuhaus5811 it’s when they’re all retracted to being as short as possible
Пікірлер: 30
Thank you very much! My conversion went just as you described. You saved me a lot of time! I’m an instant fan!
Great video! We did this with our 1976 backhoe (wasn’t as accessible as this😢!) as it was ISO and not SAE, I prefer SAE as it feels like you have more control, most modern machines now have a switch that you can change between iso and saw👍
Many thanks for all your help on my Mini Excavator. I've learned lots. Never did like the ISO pattern and now I can stick to the SAE. Keep up the great training you have provided.
Just bought an AGT DK12 and your videos are incredibly valuable. Thank you
Another good video. Thanks Cam👍
@thegarageconnection
6 ай бұрын
Glad you enjoyed it
My John Deere 2025 R has SAE controls. I'm toying with the idea of buying one of these little excavators just to play with. Good to know to change one to SAE controls.
Love the control trick I just did it to my machine awesome keep up the good work
What size are the hydraulic fittings ?
Thanks for these videos on the mini. I am planning to buy one of these. Question. Can this boom swing? I know this is not power swing. But is it hinged so I could fab some bars to lock it into the swing position?
@thegarageconnection
6 ай бұрын
It does not
Is a manual available for these machines? I have a FF13
I have recently purchased a MIVA VA13 FROM WHAT I CAN TELL IT LOOKS IDENTICAL TO YOUR H12. I HAVE SOME SLOP IN THE SWIVEL THIS IS A BRAN NEW MACHINE. THE STOP APPEARS TO BE BETWEEN THE DRIVEN GEAR AND THE DRIVE MOTOR. I'VE TRIED TO TIGHTEN THE BOLT ON THE GEAR DO YOU HAVE ANY INDICATION HOW THE DRIVE HERE IS ATTACHED TO THE MOTOR? OR IF THIS IS NORMAL. ALSO YOUR HYDRAULIC FILTER AND COOLING SYSTEM APPEARS TO FIT THIS MACHINE AS WELL I'LL BE LOOKING INTO THAT IN THE FUTURE
Where did you buy this machine?
Thank you, I really appreciate your videos. When you do you mods please include information on the specific parts you use and how to source them. I am having a tough time finding JIC 8L fitting for my alt hydraulics.
@thegarageconnection
6 ай бұрын
8L is a DIN fitting with a 24 degree flare, JIC is completely different.
How did this to mine and it caused the machine to bog light crazy when extending the Dipper arm as if the spools are different
@ricktanguay2310
23 сағат бұрын
I switched the hoses on mine and also got a very dangerous motion on the boom and stick controls. At first, the dipper cylinder appears to be laboring and then all of a sudden it jerks down and almost flips the machine over. Any ideas?
Cam I bought a agt lrt23 skid loader. Could you buy one of those and do videos also? Haha. Its actually another great machine. It was 6500 delivered to my driveway. I have a couple attachments for the H12. I will have comments for that video. looking forward to it.
@thegarageconnection
6 ай бұрын
Yes I can
Vicsec VC15 Hydraulic Excavator is it similar to your machine? I just ordered one and want more info
@thegarageconnection
6 ай бұрын
Very very similar yes
@josephmiele4780
6 ай бұрын
Great video cam. You should start selling upgrade part kits.
do you talk about parts availabilty?
@thegarageconnection
6 ай бұрын
Upcoming video on this subject actually
Your videos are excellent have helped me out a lot with my mini I do have a question for you where should the oil level be when the machine is cold in the glass I for the hydraulic fluid
@thegarageconnection
6 ай бұрын
All cylinders compressed it should be about half way
@steveyuhaus5811
6 ай бұрын
@@thegarageconnection I guess I don't understand all cylinders compressed is that running or not or I don't understand
@thegarageconnection
6 ай бұрын
@@steveyuhaus5811 it’s when they’re all retracted to being as short as possible
@steveyuhaus5811
5 ай бұрын
Thank you