Great work, your tests with the wast oil mix ratio are going to help lots of people save money and maintaining time. Greatly appreciated.

Dear sir, thank you for you effort. I hope this will help me and my family stay warm in winter, when here in Europe the power and gas will be depleted.

@Storman77

Жыл бұрын

I certainly hope you will be warm and my thoughts and prayers will be with you and your families!

@theusconstitution1776

Жыл бұрын

BEING AN AMERICAN it’s looking like the gas line that supplied you with your winter heat may have been destroyed by our asshole and Cheif 😳 T R U S T. me when I tell you that WE THE PEOPLE and the TYRANTS IN OUR GOVERNMENT are two separate entities💔 The elite POLITICIANS believe that they can put WE THE PEOPLE on our knees 😮I promise you it will not happen! As our elderly resident said to fight the government you need F 16s and nuclear bombs! What his ignorance IGNORES is that none of those things function without 🇺🇸WE THE PEOPLE 🇺🇸

@Drugaskan

Жыл бұрын

@@theusconstitution1776 Dear Sir or Madam, thanks for your kind words. We know about the battle within the USofA. Head up. No Tyrany was eternal in the history of mankind.

@theusconstitution1776

Жыл бұрын

@@Drugaskan LOOKS LIKE THE PEOPLE EVERYWHERE WILL BE protecting themselves from the politicians that’s certainly what it’s looking like in the UNITED STATES😢😢💔🇺🇸

Nice, this is how we refine function by not being afraid to try different things, excellent vid.

This is awesome I literally just ordered a diesel heater before I saw your video and I was thinking about doing this exact thing. I’m a mechanic and I also do my own oil changes. My truck holds 12qts of oil and is equipped with a 2 micron absolute bypass filter, so hopefully clean oil shouldn’t be a problem for me, as for as the mixture I’m very excited to see your findings.

@pauls466

Жыл бұрын

Can't wait to see you complaining about the carbon fauling the gauze. as it will do

@grayfox7256

Жыл бұрын

@@pauls466 the gauze being the glow plug screen? Or something else?

Nice setup! Looking forward to Your updates! Keep up the good work.👍

Not only changed the pump angle, but also it's height, perfect!

I think the biggest secret to running these things on other fuels is run it wide open all the time otherwise they are going to clog up way quicker

@cliffelmore5834

Жыл бұрын

I think that running wide open definitely helps. There is also no way around getting deposits from the oil. Using waste oil is just nice to get some "free" heat.

Awesome video, keep up the good work, I’m thinking of purchasing one of these heaters.😎

@Storman77

Жыл бұрын

They are surprisingly good little heater .

Cheap heat is the whole point! No apologies needed😉

With that coil around the exhaust to pre-heat the oil, keep in mind that the flash point of motor oil is (usually) over 400F, for diesel it is around 100F, and for gasoline it is -45F. Maybe modify your fuel lines so that only the used motor oil blend goes through the pre-heating coils?

@drewdprix2

Жыл бұрын

Right!!! Honestly a time bomb... mixing different petroleums with different vapor and autoignition points so dangerous

@theusconstitution1776

Жыл бұрын

HEATING GASOLINE is NEVER a good idea😳

@theusconstitution1776

Жыл бұрын

Place your coil inside the hot air duct that goes into the room that should bring your temperatures more in line with what you’re looking for❤️‍🔥🇺🇸

love the video :) however ive being watching these diesel heater videos for the past couple of weeks learning all i can before installing one in my home,and from what ive learnt i would go with a 1micron filter as this would stop more crap blocking the Glow Plug Burner Strainer Screen and reduce carbon build up in the burn chamber.im not sure if this would made any differance but my set up will be something like yours with both a black oil tank and a clean diesel tank,on the start up and before turning the heater off i will be using the clean diesel as its easier for the start up and hopfully by using clean diesel for the 30mins/1hr it will burn some of the deposits off before i shut it down

Looks great. Be interesting to see how you get on. Be interested to see your filter setup. Thanks 😀

@Storman77

Жыл бұрын

Ok I am using the filter cart at my work. But I will be building my own which is similar. Basically a pump and a filter head with a removable filter .

Very nice setup and video. Funny thing is, I ordered my diesel heater from Walmart just about an hour before finding this video, and I had planned almost an identical set-up (two tanks, each with on/off valve, inline filter, etc.)! Like you, I plan to start the heater on pure diesel, switch to waste oil blend, and then end operation using pure diesel again (to be prepped for the next use). The filter I ordered has a water separator, which is one of the few differences to your setup. I had not considered winding the fuel line (using metal tubing) around the exhaust, but preheating the waste oil blend makes sense. I wonder if that is necessary as long as you are blending the waste oil with diesel or gasoline to keep the viscosity reasonable? I'll be watching your future videos to find out! What can you tell us about the screen you used in your funnel to strain the waste oil mix? I might like to get one. EDIT: I found the answer in one of the other posts: King Kooker PF10 Disposable Paper Oil Funnel Filters-12 Pack, OS, Multi a.co/d/96IcGeO

Thanks for these videos. I ordered similar heater, and have been thinking if I could use waste oil with it. And with what ratio. In Finland we have quite expensive electricity and also diesel nowadays, so it is interesting topic :)

Can you show out side muffler burn show what's going on there if its smoking

Thanks for the update. I'm curios about your internal temperatures? My heater runs around 208C on position 6 in normal mode and runs around 195C on position 6 in alpine mode.

i think you on to something here. pre heating the oil mix will make it burn easier.. what temperature will you get if you burn it on full power and off alpine mode? i would think that if you get the temperature up the carbon will burn away

I seen some guys trying to use Windshield washer fluid (for Methanol) purchased from CanTire around christmas time for $3/ Jug (I think a gallon).

@Storman77

Жыл бұрын

Yes it burns but it won’t lift through the pump. It stays at bottom of the pump . Weird stuff

Look for a VP distributor.. also find your local dirt track racers or drag strip. Methanols cheap

How would you insulate the hot output pipe where it goes through an insulated wall slab

@Storman77

Жыл бұрын

You can buy fireproof insulation. Lowes and Home Depot should have that

Where do you get all this waste oil 🛢 from? I have only 2 gallons a year...

@MrRctintin

Жыл бұрын

Go to your local car service garage and buy it from them.

Have you tried a kerosene/used vegetable oil blend?

@Storman77

Жыл бұрын

No I haven’t yet but possibly in the future

I hope this works out, but 50% WMO is not easy, i was on 30% and had lots of build up inside after 2hrs use, the heater went off by itself at that time. Now im waiting for spares to fix it, in the meantime i hooked up the other one but running it on diesel only. Lets see what you manage to get out of this, the only hope is the pre heating of the mixture.

@Storman77

Жыл бұрын

Been running for 4 hours 🤞🏼😬 . My previous test ended the same way yours did . But I know people burn 80 wmo /20 petrol so darn it I know I can make it work lol. But they both have some sort of preheat going on

@triplex0076

Жыл бұрын

@@Storman77 Keep up the good work, in the meantime i will wait for my spares and follow your progress! Great job

@triplex0076

Жыл бұрын

@@Storman77 What paper are you using for filtering?

@Storman77

Жыл бұрын

@@triplex0076 King Kooker PF10 Disposable Paper Oil Funnel Filters-12 Pack, OS, Multi a.co/d/96IcGeO

@englishrupe01

Жыл бұрын

@@triplex0076 I hear commercial size coffee filters work fine, too. After all, it is going through an inline filter as well.

Have you tried going into the service menu we have the new controllers supposedly that only have a three digit password the other units have a four digit password and others posted that we can change the pump rate min max possible code 987 to be able to enter service menu password hold okay and power until flashes three dashes then put in 987 when I do nothing happens but if I hit the okay button it goes back to previous display I tried 000 to 999 and the only one that did anything was 987 so I may have locked myself out and fan RPM so you could set the fan to a higher RPM and change the max pump rate so it doesn't get too hot I'm also meeting somebody to verify that code works or not

@Storman77

Жыл бұрын

Well I will try that and let you know

If i should make such a video, where should i place the title text?

@Storman77

Жыл бұрын

It’s in your editing tool. You can use IMovie it offers text.

Alpine mode? How did you get that setup? I may not have that function. Thanks.

@Storman77

Жыл бұрын

Hold setting and ok button down till it comes on . If you have same displays

@englishrupe01

Жыл бұрын

@@Storman77 I heard you can do double alpine mode, too. Is that correct? I haven't received my heater yet. Thanks for the video and testing. I have a bunch of 5-gallon drums of old motor oil and kerosene that i intend to use up, hopefully.

@Storman77

Жыл бұрын

@@englishrupe01 you would need to access the hidden menu for that and yes you could adjust the Dan plus use alpine mode

@englishrupe01

Жыл бұрын

@@Storman77 Yes, i have just been reading up on how to get to it and use it. Apparently, the access code for all of these is 1688 and to get to it you have to press the menu button three times. You can then set the fuel/air ratio and the min/max rpm's to whatever you wish. It may well be a good way to get rid of the soot problem as it will burn leaner. Not sure if i can add a web link in here or not....generally not.

@Storman77

Жыл бұрын

@@englishrupe01 this new unit doesn’t have that same hidden menu . It’s a 3 digit code still not broken

You can’t run waste oil Will cake up screen and glow plug as well as burn chamber in less than a week

My bet is that the heater will get clogged very quickly. This coil around the exhaust is a risky business ;)

@BeeHiverson

Жыл бұрын

So was yo mammy but yo daddy risked it, all night long

@Cheese_1337

Жыл бұрын

Its for fuel preheating so it ignites easier

@timlong1462

Жыл бұрын

Preheating fuel oil is super common. Every boiler burning fuel oil # 4-6 is doing this with similar heat exchangers in the exhaust. The temperature it’s reaching in the coil is not nearly high enough for combustion, just helps atomization. Even if an oil leak developed nothing would happen except it’d smoke. It takes a lot more to actually ignite.

THat funny noise you are hearing is because of the Gasoline. Maybe you should try 10% gas. Whenever i added gas, i also heard that funny noise.

@Storman77

Жыл бұрын

Ahh ok I will try that

unwrap your exhaust as it is free heat

How are things going?

@Storman77

Жыл бұрын

Lol was just making update video but good watch video be up soon

@mobiusx8117

Жыл бұрын

@@Storman77 Over 3100 views in one day - not bad. 🙂

@Storman77

Жыл бұрын

@@mobiusx8117 wow just noticed that thanks . Seen your other post on flash point and I am aware and thinking of ways to do just that . Without added pumps and an entire fuel line infrastructure 🤦🏼‍♂️

@Storman77

Жыл бұрын

@@mobiusx8117 145k views in the last 28 days 😳😳 just opened my studio and looked at analytics. Wow

Chinese Diesel heater waste (of time) oil setup done

@Storman77

Жыл бұрын

Lol

@mobiusx8117

Жыл бұрын

Lol - many of us are fortunate enough to have time to waste on fun projects.

@DirectCurrent4u

Жыл бұрын

@@mobiusx8117 Very True! I have me whole life to waste me time doing fun stuff like this! ⚡👍