I'm just about to do this now with my Eberspacher heater. This is the only the video I have found for a VW T4. All the others are for a T5. At least I don't have to remove the fuel tank :). Thanks for the video.

@digitalnomadni

2 жыл бұрын

Glad it helped! I was in the exact same boat as you Kenny, nobody out there made one, so I thought 'sod it, how hard can it be?' - Turned out not that much, just time-consuming. I would recommend reading that link on this video though, it gives much more info.

Good Video's - I liked the wind sock I was Imagining there was a schnauzer doing the filming :-) thanks for taking the time to do these Vids!

@digitalnomadni

2 жыл бұрын

Glad you enjoyed it! Took a while, but I even found a solution to hiding the dead cat in the end. I promise, the videos do get better eventually!

Thanks for uploading this. About to do mine when my stand pipe kit turns up 👍

@digitalnomadni

3 жыл бұрын

Do let me know how you get on!

I subscribed I’m number 206 I’m about to install two metal housing 8kw diesel air heaters into my 1967 GM TDH-4519 fishbowl city bus I love these heaters

Great video dude, much appreciated 👍🤙

@digitalnomadni

3 жыл бұрын

Any time!

Great vid, planning to give this a bash next week (Casual Campervan)

@digitalnomadni

3 жыл бұрын

Hey buddy! Only just seeing this now! How did you get on last weekend? Up and running okay?

Yay looking good so far :)

@digitalnomadni

3 жыл бұрын

Thanks for the feedback, appreciated.

Im looking at this cos im fitting one for my mum . Its gale force winds with the sea at the bottom of her road coming onto the road. Oh and raining. I only have weekends to do it as well. Im thinking its not getting done 😂. Great vid by the way

@digitalnomadni

2 жыл бұрын

Not the best time of year to start a project lol.

This is great. My diesel heater arrived today, but annoyingly the kit didn’t have a steel pickup to connect it to the original tank like you did. Ive just ordered one now on eBay and will will drilling into the fuel sender unit just as you have. Thanks for sharing

@digitalnomadni

2 жыл бұрын

Good luck with it Ben! They’re certainly a great job. Just make sure not to drop the feed line all the way to the bottom, wouldn’t want you stuck with no diesel 😂

@haskyb9184

2 жыл бұрын

@@digitalnomadni yeah that was a useful tip about the feed line! Was hoping to install it down the side of my rock n roll bed, but annoyingly I think there’s a chassis trail right where I want to drill the outlets for the fresh air and exhaust 😡 I shall keep head scratching for now and let you know how it goes 😂

I hit the Bell LOL

@digitalnomadni

3 жыл бұрын

Really glad you did! Thank you!

Thanks for sharing this helpful video. Quick question for you: Did you start engine after tapping into the main fuel tank without a problem? Thanks

@digitalnomadni

2 жыл бұрын

I did, and have done everyday since without any issues.

thought you could tee off the return pipe on a t4? that's how all the builders do it.

@digitalnomadni

2 жыл бұрын

That was the plan, but, just as simple to drop a line into the tank.

@savvy2807

2 жыл бұрын

@@digitalnomadni dont think it's as simple, webasto Tee off the return near the fuel filter under the bonnet. No pump in the tank on a t4 so no pickup pipe needed. Good job tho mate doesn't harm..

Hey, I watched both videos, really helpful thank you :) Which heater did you get specifically? Do you have a link?

@digitalnomadni

3 жыл бұрын

Hey Phil, sorry for the late reply: www.ebay.co.uk/itm/5KW-Air-Diesel-Heater-12V-for-Car-Truck-Boat-Motorhome-LCD-Remote-Silencer/353170269640?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

@PhillConnell

3 жыл бұрын

@@digitalnomadni Thanks a lot, that's great 👍

Thanks for sharing this, just found your channel, can I ask why you didn't use the stand pipe in its entirety? Or is the bit you fed through the sender rigid as well?

@digitalnomadni

3 жыл бұрын

The standard stand pipe that came with the kit doesn't fit in the sender unit, as the top base isn't wide enough. I hacksawed off a part of it and used that as like a weighted down-pipe because if I just used the flexible tube, there's a risk it would eventually curl back up and no longer be submerged in the diesel. Does that make sense?

@projectt4782

3 жыл бұрын

@@digitalnomadni, thanks for the reply, yes that's a bit of a worry it doesn't fit, because looks like I got exactly the same standpipe and the same van. I've not got a kit. Soon find out I guess😂

@digitalnomadni

3 жыл бұрын

Let me know how you got on!

@projectt4782

3 жыл бұрын

@@digitalnomadni funnily enough I've just installed it today. Yes I used the same stand pipe and didn't come across any fitment issues so maybe ours isn't the same. Easy job though, only took half an hour thanks to your video, just got to connect it the other end now and clip the hose up 👍

@digitalnomadni

3 жыл бұрын

That's great news bud! Glad it was a simple job.

If you need a fuel sender cover I could get one for you. 👊🏻 we have a T4 graveyard about 30 miles from me.

@digitalnomadni

3 жыл бұрын

Might take you up on that, have it on standby for the next time I lift the mats then swap it out.

That cover you're after is part number 701803959a. You can find it at www.volkswagen-classic-parts.de/catalogues/TransporterT4-1991-1994/html5.html#/450 Lookin good!

@digitalnomadni

3 жыл бұрын

Might not need it now, the next video will explain why :(