Chevy Colorado & GMC Canyon 3.6L [#63-3088] Air Intake Installation
Автокөліктер мен көлік құралдары
See how easy it is to install a K&N air intake on your 2015-2016 Chevy Colorado or GMC Canyon 3.6L.
K&N 63-3088 performance air intake system is easy to install and guaranteed to increase horsepower in 2015-2016 Chevy Colorado or GMC Canyon with a 3.6L engine. When dyno tested, this air intake created an estimated gain of 19.41hp horsepower at 3551 RPM.
This air intake includes an oversized washable & reusable air filter that can go up to 100,000 miles between servicing. K&N air intake 63-3088 also includes a free flowing polyethylene rotomolded intake tube and aluminum heat shield to isolate intake air from engine heat.
More information on this air intake system:
www.knfilters.com/cold-air-in...
Search for an air intake for a different vehicle:
www.knfilters.com/search/appse...
K&N® is the world's leading manufacturer of washable performance air filters and cold air intake systems.
The world-famous High-Flow Air Filter™ was pioneered by K&N in 1969, and features an innovate design of layered, oiled cotton media to effectively capture dust, dirt, and contaminants-offering top-quality filtration.
Since that time, K&N has grown into a world-class automotive technology company, selling air filters, cabin air filters, oil filters, and air intakes in over ninety countries-with nearly 10,000 unique products for cars, trucks, motorcycles, outdoor equipment, and industrial applications.
With a strong Consumer Protection Pledge and industry leading warranties, K&N commits to quality, reliability, and customer satisfaction.
Whether you’re looking for an air filter upgrade for your Ford Mustang, a new air intake system for your Chevy Silverado, or an Electronic Carburetor Injection system for your classic Pontiac GTO, you’re sure to find high-quality parts from K&N to propel your vehicle’s performance to the next level. Check out www.knfilters.com to find all of the parts available for your unique application!
Пікірлер: 38
Why disconnect the negative battery terminal? Is it to avoid a check engine light?
What type of screws are the ones that mount the plastic cover to the engine? Thread? Pitch? Im pretty sure theyre M6 but I dont know the pitch. Thanks.
Why show it on a Dyno without showing results??
Just from my experience.. don’t forget the hose clamp that holds air tube to throttle body before you can take off engine cover.. it isn’t shown in this video. Other than that I was done in less than an hour.
Will the K&N 77 series CAI be compatible with the 2016 chevy colorado 3.6L? (The polished intake in the video)
This is not the same instillation video on your website for this part... At 3:49 the mass air sensor assembly does not come with this kit, i called your number and this part seems to not exist. Anyone installing this go to their website and watch the video.
What is the air bolt on the top of the engine above the throttle body.
Where can I get a pair or 2 of those gloves?
Is there a way to reinstall the factory valve cover?
@UpNorthMotorsports
4 жыл бұрын
Yes there is I have seen it with people use a die grinder to make it fit
Wouldn’t it also increase fuel efficiency a little
What is the benefit difference between installing the full intake system vs just a K & N air filter?
@UpNorthMotorsports
4 жыл бұрын
Less restrictive on filter and the path it takes allows for better passage of air
Does anyone know if this will fit the 2017 model???
@patrickfort123456789
6 жыл бұрын
probably, they didn't change anything...
@itstrigghere7624
5 жыл бұрын
Will not fit the 2017 or 2018. The throttle body is not in the same location as the 2015 and 2016. But they do make them for your model!
sucks it leaves the check engine light on
@dannymoreno15
7 жыл бұрын
Jesus Saavedra thanks man, was thinking of getting it but it doesnt sound worth it. theres very little you can modify on new cars . .
@serfherrera2385
7 жыл бұрын
If that's the case, something was not installed correctly. You should take it back to the installer to diagnose the problem. I've had no problems with mine.
@itstrigghere7624
5 жыл бұрын
Probably put the mass air flow sensor in backwards.
@rosskious7084
Жыл бұрын
Something is not right if the light is on.
Would this fit on a 2019 Colorado?
@KNfilters
3 жыл бұрын
No, this will not fit a 2019 Chevrolet Colorado. If you have a 2.5L, check out the intakes on this page www.knfilters.com/chevrolet/colorado/2.5l-l4-gas/2019/ If you have a 3.6L, check out the intakes on this page www.knfilters.com/chevrolet/colorado/3.6l-v6-gas/2019/
is ok for canyon all terrain 2020 ?
@KNfilters
4 жыл бұрын
Please visit the product page at knfilters.com for an up to date list of applications.
Will this work with the 2017-2022 Chevrolet Colorado ZR2?
@KNfilters
Жыл бұрын
No, if you have the 3.6L check out the intakes on this page www.knfilters.com/chevrolet/colorado/3.6l-v6-gas/2018/ If you have the 2.4L check out the intakes on this page www.knfilters.com/chevrolet/colorado/2.5l-l4-gas/2018/
@XPolarXRaptorX
Жыл бұрын
@@KNfilters Thank you do much, I’ll take a look at these
Will it void my trucks warranty ?
@KNfilters
Жыл бұрын
No, there are consumer protection laws in the United States that protect consumers from installing aftermarket components on their vehicles. If you have any questions or encounter any issues please contact our Product Specialists at 800-858-3333 or tech@knfilters.com for assistance.
Only problem is without the valve cover the engine bay looks ugly as hell.
@michaelbriggs3861
5 ай бұрын
I was debating trying to mod the factory cover to fit back on. Not sure I trust my dremel work
@TonyVainosky
2 ай бұрын
The problem with all of these plastic engine covers is they just trap the heat IN, something this engine layout and design is extremely guilty of. Cannot wait to replace my factory intake with the one from SB
The air shield looks like a homemade piece - very ugly and loose. Definitely will not get this for my truck!
@andrewc9234
7 жыл бұрын
its K&N you'd be hard pressed to find a better more reputable company
@trelixz7138
6 жыл бұрын
Just buy the k&n filter to replace the stock one and keep the same housing
Yea. Now i have a lean bank 2 code.Waste of time and money.
@KNfilters
3 жыл бұрын
Please contact our Product Specialists at 800-858-3333 or tech@knfilters.com. They will be able to help you resolve the issue