Added the dual rate to myXP1000 made a night and day difference. Had you re-valve/and rebuild and it's even better!

@ShockTherapyllc

11 ай бұрын

Hell ya! 🤘🏻

I watch a lot of videos, and I still don't think I did it right. I have 8in between the springs in the rear end. They seem really tight. I read that was factory recommended. What is your recommendation?

@ShockTherapyllc

Ай бұрын

Email us your specs and or pictures of your setup to sales@shocktherapy.com so we can see what needs to be adjusted.

You should show a tire size to height chart to make it easy. Also, is there a video to set up the crossover collar? I got a set of your springs and need to put them on. I'm excited to see the difference. 2021 X3 max RR

@ShockTherapyllc

11 ай бұрын

In general, rear crossover will be 2” above spring divider and front at 1”. But check the video for your specific vehicle.

Hey guys great explanation.👌 Is this method of using tire size a good rule of thumb for other vehicles? eg ranger/silverado desert truck?

@ShockTherapyllc

11 ай бұрын

Yes. Works for everything.

Thanks for the vids, I'm learning a lot! Do you happen to have the ride height for a Can Am Defender? If it matters its an 18 HD10 max XT

@ShockTherapyllc

4 ай бұрын

13.5-14” stock tires. Add 1/2” ride height for every extra inch of tire over stock

Should you measure off the tires for polaris as well to determine ride height?

@aaronchamberlain1638

11 ай бұрын

yes

A rzr pro xp with 32" tires. Where do you want the ride height at? What number do you start with? The height listed from the factory?

@ShockTherapyllc

11 ай бұрын

16” front. 15.5 rear with you in it. 👍🏼

I have a Turbo S with ur sprint kit. Can i adjust height with coilovers on the car?

@ShockTherapyllc

7 ай бұрын

Absolutely you can. Easier if you Jack the car up. 👍🏼

Wait, what? . The cross-over locknut should be 2 inch upper the spring dividers ?

@ShockTherapyllc

11 ай бұрын

Every spring kit and UTV can be slightly different. Check your car specific settings but in general 2” rear 1” front is a good starting point.

What kind of ride hight should i shoot for on a 23 yxz with 32s

@ShockTherapyllc

7 ай бұрын

15” or so. 🤘🏻

What spring compressor are you using with the shocks still installed when you are doing the pre-load adjustment?

@ShockTherapyllc

10 ай бұрын

Jack tech. Amazon🤘🏻

@JohnnyMoseley

4 ай бұрын

@@ShockTherapyllc Can you confirm this. I have the Jacktech 3500 but your using a compressor without removing the spring and it looks like its only one side of spring vs the normal 2 piece design you see for sale. What model number compressor did you use on spring without removing it from buggy?

@ShockTherapyllc

4 ай бұрын

@@JohnnyMoseleyhere is the smaller one we use a.co/d/6hq7pgp

@JohnnyMoseley

4 ай бұрын

@@ShockTherapyllc Thanks. Exactly what I was looking for.

So 16.5" ride height in the rear with four grown men in the car?? Really curious what the height is without the guys in the car......I bet that thing looks like a "monster truck".....

@ShockTherapyllc

Ай бұрын

With no riders it's going to sit pretty tall, we always set ride heights loaded with gear and passengers so it's correct when your riding.