Project BLOWN Budget!

@VTECAcademy

11 ай бұрын

Not yet, that K23 head was cheap!

@johnfarias7230

9 ай бұрын

​@@VTECAcademyI just went through all the videos on this k23 I must have missed something cuz I couldn't find out how it was built I wanted to duplicate it just for fun cuz the engines is so cheap

@chrismuncey6023

6 ай бұрын

Exactly what I said!

good job old souls. would love to be around you guys to learn first hand the stuff that aint in books.

My new favorite video to play in the garage all day long...

This is a HUGE help man!!! About to do the same thing so this is invaluable.

It would be awesome if you guys were willing to sell that adapter plate for the intake manifold that turns it into a center feed!

Sunday night special!

You guys are amazing! Thank you!!

@VTECAcademy

8 ай бұрын

Thank you for watching!

doing gods work

Hi guys, I would to do a k swap for my Integra dc2. I want to do budget build. Hopefully i can purchase the engine, transmission and other stuff. Lovely videos

Needs a bigger header an exhaust an you'll benefit from those mods imo bringing more air in an not getting it out any quicker is most likely why you didn't gain anything from those mods. It's just an air pump, bad ass ride though appreciate the build an all the hard work guys

@VTECAcademy

11 ай бұрын

I feel like the major problem was the catalytic converter.

@bucktownfg

11 ай бұрын

@VTECAcademy yeah def agree with ya on that too man those things are a huge bottleneck

These are so good.

@VTECAcademy

5 ай бұрын

Thanks for watching! Hopefully you have seen the newest episode too. It sounds so good.

how did i miss this??! 😮

😮❤ wow you guys kill with this video very informative

@VTECAcademy

11 ай бұрын

Thanks! With so many new subscribers we wanted to show everything so far.

You can also take the type s RSX trans gears and swap them in the accord casing .

@VTECAcademy

10 ай бұрын

With some modifications to the case.

@James-dx9ho

10 ай бұрын

@@VTECAcademy0 mods to the case

Просто титаническое 3х часовое видео, спасибо)

@VTECAcademy

11 ай бұрын

LOL Better use of time!

In your fit test drive video I think you mentioned something about only being able to get a few pulls in due to heat soaking. In this video I notice you using the stock radiator, wouldn't that radiator be undersized for the larger engine? Or are Honda radiators interchangeable? Or maybe because this is intended for street use it's no big deal. I'm looking to learn more from professionals like you guys! I love your videos, I've picked up so much already!!!

Yall want me to bring my EF out there? Would love to get it swapped by the people who know it best, But I probably am one of many in line... Either way, love the content been watching since I got my first Fit!

@VTECAcademy

11 ай бұрын

Yeah, unfortunately we can’t work on other peoples cars. We have enough of our own.

Ya gotta be try'n If ya wanna beat Brian

good

I’ve heard a k24z3 doesn’t fit in an eg? Have you had any success with that?

Can a 6 speed 4wd subaru wrx sti engine and drive train go into 09 elantra sedan 4 door gl

Love the video but K24a2 for $400?.....where? What track was that?

Where in the world did he get these numbers from? k24a4 for $400, the cheapest Ive seen online is $899, transmissions damn near the same price, and a stock accord ecu around $200-$250. This has got to be a reupload of a video from like 10 years ago when the price of Honda parts was cheap and affordable.

@VTECAcademy

11 ай бұрын

We bought it from Pull-n-Save in Phoenix AZ. That’s normal pricing and is still the same here. On a 50% off day I purchased 2009 TSX engine and 6-speed manual transmission for $300. The TSX head I used in the video cost me $60 if I recall.

@matthewsmid8505

11 ай бұрын

These are numbers you get at a pick and pull junkyard. I live in SC and I can pull a full TSX K24A2 longblock for $300.

@deyvisbarrientos4612

9 ай бұрын

Exactly. That is so cheap. 😂😂😂

When is the next k fit video coming out ? I’ve been waiting lol

@BrianGillespie_brianathasport

11 ай бұрын

Probably next week.

@VTECAcademy

11 ай бұрын

The struggle is real! Working on it today and tomorrow.

Where can I find the budget parts list. I have a k20z3 motor and transmission I'm looking to use

@BrianGillespie_brianathasport

11 ай бұрын

I've never written one for that engine. It's pretty similar though. What car?

@nwhatchgalvin269

11 ай бұрын

I'd like to swap it into a DC integra

Hey, vtec academy my 2010 acura csx with automatic transmission my daily drive i awap the K2.0Z2 with a K2.4A2 TSX engine my problem is that I am still not available able to get an ECM to run the k2.4 i bought the ECM from an acura csx type S which is a manual transmission car is there any way i can swap in that ECM to run the K2.4

Did you bench bleed the master before using the Reverse Brake Bleeder?

@VTECAcademy

11 ай бұрын

Nope.

I know 8th gen coupes are a bit narrower than the sedan

Need that b-series shirt!

Can you put the k23 head on an 07 crv? How different would it be from this ?

@VTECAcademy

6 ай бұрын

The same.

@macanoon

6 ай бұрын

@@VTECAcademy what about ecu ? The crv doesn’t really have any aftermarket options.

What throttle cable braket did use for the accord throttle body?

@VTECAcademy

8 ай бұрын

Element throttle cable with a bracket that we made.

@Almostboosted

8 ай бұрын

@@VTECAcademy 🤔 how can I buy one? They don't have anything for this throttle body.

Where can i get that tshirt with the k24 on it

Good day sir can we use a 2003 crv engine and install in a civic 1997?

@VTECAcademy

8 ай бұрын

Yes!

@ramonbautista1250

8 ай бұрын

@@VTECAcademy ty currently my civic is in the Philippines I'm in California trying to score some parts for. My d16 engine jdm engine in my country is so expensive really much better here in America sir

@ramonbautista1250

8 ай бұрын

@@VTECAcademy most of the local crv engine are automatic what transmission can we use to make it manual sir? 1997 crv engine here in America how much it will cost or do you sell engine maybe I can afford and take it apart put in a box and shipping to Philippines

AWD and turbo

Shew should of had just got a harness from carrot top racing

How long was the process to turbo the entire car and change the whole engine to get it to where it is today

@VTECAcademy

10 ай бұрын

How do we work straight through? Would’ve probably been three or four days, not including shipping time for the parts we bought. We did it over a three month period.

Hey Brian thinking about vtec k swapping my 2015 acura ilx, you know by chance any certain model i should use. Should i use the same transmission? Would like to go manual.

@BrianGillespie_brianathasport

11 ай бұрын

2012-2015 Civci Si.

Can k24z out of the 2010 tsx be swapped into eg/ek/dc?

@VTECAcademy

11 ай бұрын

We have a video on that.

VSS will never work because your using a 05-06 PND ECU with a transmission that is not 05-06 but rather 02-04. Its a 5 spd base ecu and should use the trans that have speed sensor in the front of transmission rather than by the differential. Trans with VSS in front of casing those would be considered countershaft driven (2005-06). Not sure in KTUNER. Also, the 05-06 ECUS hardware are different, that's why people use 02-04 then send ecu to hondata to modify to work with 05-06 trans and speed sensor. So basically if you were to get a 05-06 5 spd then you would be in business, but you would still probably need VSS converter for your older cluster.

@VTECAcademy

6 ай бұрын

The KTuner has functions that allow it to work with the CSS. It also outputs a correct signal for the cluster.

I wiah i could find those prices around me.

I'd rather teach someone that has good character that doesn't know much than someone thats good with a bad attitude. Dude with th afro is good shit man.

Honda guru keep up great content

@VTECAcademy

11 ай бұрын

Hondas forever.

Are you going to paint the lip?

@VTECAcademy

4 ай бұрын

Probably going to do a splitter and air dam.

can yall get me a full swap for under 1000 with ecu k tune and harness?

@VTECAcademy

6 ай бұрын

LOL No, we can’t , but maybe if you ask Santa 🎅🏽

What track are you guys at

@VTECAcademy

9 ай бұрын

We were at Musselman Circuit in Tucson

What radiator is that?

@BrianGillespie_brianathasport

11 ай бұрын

CSF K swap radiator.

@VTECAcademy

11 ай бұрын

What he said.

Hi idk if you guys read comment sections but Hi I did recently drove accidentally with my e parking brakes on I smelled burning .. I only drove for roughly 5-10 minute going 35-45 miles per hour , what further consequences or list all please I was trying to get to the gas station

@WAFEYYQQ

11 ай бұрын

I ask because I wanted to know if I want to be informed and I know Obviously get it checked out but I wanna be prepared if necessary to make any fixes thank you!

@VTECAcademy

11 ай бұрын

You’re probably OK, but you might want to check and see what the pad wear looks like on the rear brakes.

@WAFEYYQQ

11 ай бұрын

@@VTECAcademy I just had alignment today cuz of LCA bushings replacement , they told me the rear camber arm needs to be replaced is this a good recommendation from them or nah

@WAFEYYQQ

11 ай бұрын

@@VTECAcademy thank you 😊 and really if anything it either warp or worn my parts right

Just like me and my brother lol It's like he honestly doesn't have a fucking clue what he's doing, and almost timid

Your transmission has a lot to do with putting that bower and power band down, accord trans are not that great .

@VTECAcademy

10 ай бұрын

We switched to an RSX transmission with LSD.

Regulatory

But you are not recommending the 07 year K series. Any other year is not worth the money.. please do a K series the proper way vs having to rebuy a correct engine to save money vs doing this way that wot cost more down the road

@VTECAcademy

11 ай бұрын

We didn’t recommend one way or the other. Of course there are some engines better than others.

The 24 A2 has 200hp

@VTECAcademy

11 ай бұрын

I think 197 is the advertised spec.

@jackbuercklin

10 ай бұрын

@@VTECAcademy 205? i thought

@tazimali1650

5 ай бұрын

It's 205 hp

Screw a bunch of rice burners

@Bigdikus

2 ай бұрын

Go and drive your v6 😂

@rickyfulks889

2 ай бұрын

​@@Bigdikusnah, my passion is american muscle. V8 USA, ud b more confortable in japan NUTZ😂

@Bigdikus

2 ай бұрын

@@rickyfulks889 good for you kid. Maybe let others have their own passion and not be toxic. People like you are what gives the car community a bad rep

@rickyfulks889

2 ай бұрын

@@Bigdikus have fun

Is there really a k23? 🤔

@ClaytonF10

11 ай бұрын

No

@anushanthvinayagamoorthy8342

11 ай бұрын

@@ClaytonF10rdx turbo

@BrianGillespie_brianathasport

11 ай бұрын

Yes, it came on the first GEN RDX.

@Portugal181

4 ай бұрын

What motor & transmission are you using ?

It's not good to cut corners. Put the motor together with new parts not used. Your reusing fly wheel bolts which isn't a good idea. This could've been avoidable If your mechanics knew better...

@VTECAcademy

10 ай бұрын

This build is all about cutting corners. Doing it as cheaply as possible. Using parts gathered from cars and engines in the salvage yard. We reused the head bolts the cam chain, the chain guides etc. It is a budget build to the max.

@kaijub143

6 күн бұрын

Budget build

Make a RD1 swap with AWD

i feel like im in real school

@BrianGillespie_brianathasport

11 ай бұрын

LOL