Pro tip for applying crazy fine detailed vinyl: don't weed it right away. Mask the whole thing, apply it, then weed it on the substrate. With both the positive and negative parts stuck firmly to the substrate it's easier to pull out the negative without disturbing the positive by accidentally lifting parts off you don't want on the wax paper backing.

@amyhancox2262

2 жыл бұрын

This is GENIUS!

This was extremely helpful - thank you! 🤗

Electrolysis is also a great option that can be done pretty cheaply with great results and can even do shading and gradients. Enamel spraypaint makes a good resist as well.

Love the idea of a detail explanation in a longer video, for those wanting more. I do though like the shorter one, as I’m always interested in new tips & techniques, using multiple media’s; so shorter ones “initially” give me ability to view more topics.

I truly appreciate step by step videos showing the entire process, hence long videos. Thank you! 👍

@GomeowCreations

3 жыл бұрын

Thanks. So it's kind of odd how long videos work on my end. They are easier and faster for me to edit but people watch them a lot less. Short videos take like 2 to 4 times as long to make but people watch more of the video.😅

I have been using cheapo Staples Glossy photo papers for years ironed on.. Ferric chloride for brass and copper, ferric nitrate for silver. Use a small tub with aquarium pump with aerator hose gives a nice texture piece face down. Am always amazed at the detail I can get. Scotch bright on medal before iron.

As a fellow content creator, I really appreciate all that you’re doing. I know how cumbersome it can be at times to set up cameras, edit, etc. but you still manage to make your videos so relaxing yet extremely informative!

*Sees the vinyl cutter piece finished* …. Immediately bought the vinyl cutter one. Because wooooow dude. It’s the most amazing one by FAR. Thank you so much for video!! I’ve been looking for the best way to etch with ferric and what papers/tapes to use. This was perfect, again thank you!!

@GomeowCreations

2 жыл бұрын

😊👍 happy to help.

Thank you so much for showing the different options and how to use them. I've seen some really beautiful etched metal projects, such as yours, and I have a new appreciation for the effort and patience it takes.

Thanks for sharing your knowledge. This is gold.

Hot acid dramatically decreases the time needed to etch, but it also dramatically reduced the time you have to remove any splashed acid from your skin before real harm is done. With most acids at room temperature you get a comfortable margin of safety to flush the affected area before any real harm is done. Hot acid immediately starts breaking down tissues, as soon as you are splashed real damage is done. Its kind of like you CAN drive 120+mph down a road to get somewhere faster, and you may even get there without anything bad happening, but that doesn't make it worth it. Use room temperature acid and work on another project while it etches or use a bubbler, don't heat your acid unless you are in a lab setting, have proper ppe, an eye wash station, a quick way to neutralize the splashes that will inevitably happen, and have gone through lab safety so many times you could recite the text book.

@RealAphotiX

2 жыл бұрын

Also, excellent video. I've been using nitric acid (typically sold as Silver Etching Mordant - mordant in this case being nitric acid pre-diluted in water, as the pure stuff is disfiguring even in a minor accident.) I think like I'd like to give ferric nitrate a try instead -- Nitric acid (40-60%) is rated as a 3 (extreme danger) on the danger scale on the SDS, where as ferric nitrate is rated at a 1 (slightly hazardous.)

A very nice overview of the various methods for etching. Thank you for doing this!

Thnx mate, tried it with vinyl, worked like a dream. Awesome

@GomeowCreations

3 жыл бұрын

Yeah it really makes things a lot easier

You can actually print onto a sheet of overhead projector acetate with a laser printer. It's a thin, clear plastic. You then put a piece of plain paper on top and iron the design on.

@GomeowCreations

4 жыл бұрын

I have seen that too and thanks for sharing that info 😁👍

@KeyushTheStuntDog

4 жыл бұрын

@@GomeowCreations It was one of the techniques I used when doing my degree in silversmithing. It works well, but does usually need some touch ups with a marker. The decal way definitely gives the best coverage. And a heated bath cuts your time down to about 10 - 20 minutes for a deep etch.

@mmedeuxchevaux

3 жыл бұрын

how do you apply it to the metal surface?

@regieregie748

9 ай бұрын

@@KeyushTheStuntDogdo you have video of that technique?

My jewelry teacher said Sharpie changed their formula and it doesn't work well anymore. She also said it's better to use to use a high-carbon laser printer, whatever that means.

Very interesting! Thank you for being so thorough with the video.

Excellent vido. I like your idea of doing longer videos and being able to refer back when you do a shorter video. By doing this long video it narrowed down how to get the cleanest etch. This is great for your subscribers to help us decide which technique we want to use without the frustration of trying each. Hope that make sense. Thank you!!!

Your long video is perfect and professional.. it was comprehensive and I learned a lot from it thanks bro 🌹🎉🎉🎉

Thank you for all the great videos. They are a much respected resource for me as I am just getting into hobby jewelry making. Keep up the good work!!

Thanks so much, really appreciate you taking the time to do these types of videos

these videos are just awesome. You really do a great job going into details. This is now one of my favorite channels . I just find fascinating watching people like you explaning how to do things, even if I am not in the business of doing this stuff. I just love to gain knowledge and you are a star!. Love this channel!

@GomeowCreations

3 жыл бұрын

😊👍

I love the detailed description. Much appreciated.

Increible este es el mejor video que he visto sobre este tema, muy bien explicado y detallado, muchas gracias por compartir sus conocimientos, un saludo desde Mexico

Excellent survey of a variety of methods; wish I had seen this a few years ago. A thermal tshirt press works well for toner transfer, and there is other glossy paper out there that works well.

thorough process of brass etching. appreciated. thanks.

Very informative and I really appreciate it that you took a lot of time out of your schedule to put this tutorial together. It really helped to explain the various techniques and what can be expected in the results. I'm all for in depth tutorials because it really does help in reducing the learning curve, not to mention it really prevents a lot of beginner mistakes from happening. Not only does it save tons of time and money, it also does wonders for people who may get frustrated easy or who are easily discouraged. Having a head start reduces the amount of frustration which, in turn, allows more time spent actively engaged with the process, that ends with higher rates of success. Success builds confidence, and confidence is what builds businesses. Thanks for your time and knowledge. Cheers.

@GomeowCreations

2 жыл бұрын

No problem and I'm happy to be able to help.

Great job! Thank you so much!

Thank you so much. this was very helpful!

A cheap laminator makes it really foolproof and easy to get the toner to stick to the metal. I use that for making double sided circuit boards and it works perfectly probably 95% of the time.

Thank you very much. Very thorough.

useful educational.Thanks .

I like the more detailed information on new videos thank you for the information.

Thanks for share your precious experience

@GomeowCreations

3 жыл бұрын

No problem 😊

Brilliant video, thank you!

The first 1000 people to use this link will get 2 free months of Skillshare Premium Membership: skl.sh/gomeowcreations3 Vinyl Cutter and materials: Silhouette Portrait 2 Vinyl/Paper Cutter - amzn.to/2KUjmV7 12" x 12" Matte Black Vinyl Sheets - amzn.to/2yle16D 12" x 50 FT Premium Clear Transfer Paper Tape - amzn.to/2StOFKu Acid: Ferric Nitrate 100g (For silver)- amzn.to/2Swlnen Ferric Chloride 1 Quart (For Copper and Brass) - amzn.to/3b4pu89 Muriatic Acid, 1-Gallon (For Copper and Brass)- amzn.to/2WoVVbO Metal: Brass - amzn.to/2WkpXNR Copper - amzn.to/3daAuSA Other Resist: Press-n-Peel Blue Transfer Paper - ebay.to/2zTeZrd Sharpie All Sizes Kit X-Fine, Fine, Medium Bold - amzn.to/3d7q7yY If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that that I'm updating all the time so bookmark it to stay up to date GomeowCreations.com/tools-and-materials and GomeowCreations.com/partners-discount-codes *If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*

I love your videos. I have learned a lot!

very useful information

Press 'n Peel had just come out when I was in college. Everyone else in class was drawing their boards with a resist marker and I did mine with the Press 'n Peel. Even put my name and the name of the class on the board. I got a 100% on that project.

Excellent demo and explanation...

@GomeowCreations

3 жыл бұрын

Thanks 😁👍

Thank you. A really great presentation.

@GomeowCreations

Жыл бұрын

😁

I've been looking for something like this for a while since I come from more of an intaglio printmaking background and want to get into metalworking for jewelry. I'm so excited to try this. I think that posca markers might be a good alternative for sharpie - that's a pretty popular resist for a few hand-drawn printmaking processes. With the hand-drawn techniques I think you could probably make interesting effects using a pointed metal stylus as if you were doing etching for printmaking on sheet metal plates. This is so fun thank you so much for this

@GomeowCreations

3 жыл бұрын

Yeah I know sharpie is no the best think in the world for this but I just wanted people to see that had options 😊 I wanted to used other paint pens but the items needed and the cost of this video was really getting up there so I had to stop at some point haha. That being said I will have to check out the markers that you are talking about in the future.

Thanks once looking for a way to etch my belt buckles. looking all over the internet and seeing all sorts of crazy prices to do this and I really do appreciate that you showed it so easy I actually have all this stuff in my house

@GomeowCreations

3 жыл бұрын

No problem, let me know how it turns out 😊👍

@chadh3441

2 жыл бұрын

Check out DIYeasycrafts with Berg. He does some awesome knife blade etchings and makes some cool knife handles too.

I was gonna say acids work much better when hot - but you did say it 😏. Wish I could have found a video like this years ago when I was learning - woulda saved a butt load of trial and error! Excellent video! 👍👍

Thank you, your video was sooo helpful. what did you do to make the final finish with the black? it looked great.

Instead of using Sharpies as a resist, use paint pens from art supply stores.

I’ve etched on brass using ink & stamp. Then etched with salt & my rectifier at low voltage.

Nail polish works well i use it on my metal when etching

Great video with tons of info! I am trying to make a brass casing for a guitar pickup and need to make a logo on it. I will be doing lots of these and was wondering if I could simply have the vynil decals made at a sticker shop and use those as the resist? I'm assuming yes. Seems like a great way to streamline the process

Add hydrogen peroxide to the acid for very very fast results. You can even just use concentrated pickling vinegar rather that hydrochloric acid or ferric Nitride/Chloride. The vinegar and peroxide is good for etching steel.

Briliant!!!!

Good job!!

@GomeowCreations

3 жыл бұрын

Thanks

Thanks for sharing!! What acid would work with nickel silver alloy? Thanks

A bit more complicated, but if not using a vinyl cutter (I use cricut maker) and needing finer details, I'd be inclined to use a UV resist. For the artwork print to PCB artwork film, check for pinholes and touch up if needed. That step is then done for however many uses you need. Chemically clean the metal to ensure no contaminants (water droplet test), apply UV sensitive film to metal or some other way of coating the metal with resist, sandwich artwork to metal with glass to avoid shadowing and expose with a UV flood light for a couple of minutes or so. Develop the metal to strip the resist that wasn't exposed. Etch. For PCB's I always used sodium persulfate (fine etch crystals), which works great for copper, gives no mess and the etchant remains clear, and should work for brass and some others but not aluminium.

@JanetDiaz6152

Жыл бұрын

Hi , is there vid for what you described. Im new and learning.

seriously cool video i have secretly wanting a machine to do stickers and designs etc, watched vid on etching boom, boom , months later you are there i watch some art dyi jewelry stuff and watch this my main objective is you mentioned heat transfers, i am curious does this do the design on the special paper, reason is i have hat machine that heats the hat allowing a iron on patch as well as a few 20x20 iron presses for clothing, but send the art out to have done, if it could or i could learn how to do it myself win win situation, again thanks for great video

Could use one of these methods to apply a mark on the blade of some folding knife build projects. Already use muratic acid for Damasteel Damascus hi/lo etching.

@GomeowCreations

4 жыл бұрын

From what I know, you might want to look into salt water etching for steal. I think the vinyl would be your best bet and it looks the most professional 😊👍

Is that Avery laminating sheet u used with the cutter and vinyl...?

How can you put color on the etchin after?

Thank you so much for this information, the video explains it so well!! I have heard nitric acid works on silver too, is that true?

@GomeowCreations

3 жыл бұрын

Yes it does

And the Winner iiiiisssss: Vinyl De Cutter )) ,,,Thanks men for Awesome comparison video ,this is Very Berry Helpful to share with us,, yeah sure make more great videos why not , I am thinking to by a Vinyl cutter but since so your video and I am asume you have experience and knowledge please tell me which vinyl cutter is better for fine details you can recommend ( of course from Michaels ,Hobby Lobby or JoAnn's ) or what you recommend. Thank you again and Appreciate!

Gud evening sir, i'm watching ur you tube program nd i'm interested sir, can u share me, the plexiglass the itch of the surface what acid need to itch sir GBU

Hey, I'm interested in doing quite large etchings (16in squared), and I'm wondering if you have any experience doing this? I'm looking to do detailed line art, so I don't think the vinyl is an option... Cheers!

I can help you with one item. Turn off auto focus and use a smaller camera shutter diameter of like f8. More stays in focus and it won't bounce around like yours (and 90% of youtubers) who leave on autofocus.

@GomeowCreations

Жыл бұрын

This video is about 2 years old now and I have changed up a lot of how I shoot my videos. I still use autofocus, if I lock it in place then if I move in closer everything will be out of focus. I have just got better at staying in the frame and keeping an eye on the display make sure that I'm in focus and I just edit everything else out.

What acid should someone use if they're working with stainless steel?

Hello😉How did you get the black patina ??I’m very interested to know that please answer me😅😉

Great video, thank you!! Sadly the printer is out of stock. A pity, because the price was great, when compared to others. Thanks again!

@GomeowCreations

4 жыл бұрын

Thank you hand here is a link to on that is in stock amzn.to/38osMmZ

There is another KZread video that uses “Glossy Laser Printer Paper” (I purchased some from an office supply locally and it’s 52# paper) to put the design on instead of glossy magazine that I tried with unacceptable results. I did however experience your problem using an iron as the heat source (will try heat gun). Also in that video the transfer of toner was done using a mixture of ethanol and acetone which seemed to work well for him other than leaving behind some of the paper’s fiber on the toner transferred only.

Really great video, thank you for the time you put into this! Based on this video, I decided to go the vinyl cutter route but chose the Cricut Joy since it's small. For small cuts, it wasn't accurate. Then decided to try a 5.5w diode laser on a Sainsmart 3018 prover to ablate matte black paint off brass in preparation for acid etching but couldn't get it to have really crisp lines. I'm now thinking of going back to the vinyl cutter option but perhaps a Portrait 3. My designs are very small (filigree within a 1cm diameter). All this time down the line, what would you suggest? PS. I really dislike the photoetching option. Many thanks in advance! Gunter

@tsundear

Жыл бұрын

what did you end up doing? i have tiny designs too and would love to know

@guntersg

Жыл бұрын

@@tsundear I ended up getting the Portrait 3 and am much happier with the accuracy of its cuts.

I use puretch film with transparency sheets and ink jet printer with ferric acid with 2 x 500 watt halogen lights and a vac bag

Love this detailed video, I have had mixed results from using Nitric Acid so great to have some tips and methods to try, many thanks and Best wishes cazwadejewellery

Plz tell how to etching on gold plate

You don't need the mat when cutting vinyl - it already has a backing sheet, just don't cut too deep. The mat is used for paper and other products that don't have a backing. Take the clear protector off when using paper - it's sticky 😁

do you use ferric nitrate to etch silver, right? I just watched a video tutorial where this woman was etching silver in ferric nitrate hanging the piece with a wood stick and thread on a jar. It came out great, but others were saying that they tried it, and the silver was full of stripes. Would you do a video on how to etch silver? do you recommend using the tape laying it flat like you did using the other acid and the brass?

@GomeowCreations

3 жыл бұрын

Yes you do use ferric nitrate on silver for etching. I can make a video doing that to something in the future. So if you hand it it will state to get lines due to how the acid works on the metal and that is why I have mind flat on in the acid so when it is etching the parts of it fall straight down and don't leave lines.

where did you get the metal from?

what's the little plastic tool you're using to burnish the black design down onto the metal?

@GomeowCreations

2 жыл бұрын

It wasn't plastic it was agate here is a link to some amzn.to/3EPrTT0

How would this work for a thicker piece of metal (ie. 3-5mm thick)? And what would you recommend for that, or would it not work?

@GomeowCreations

Жыл бұрын

It should work the same

I am doing a cylindrical object, so I can't use an iron. could I use a heat gun and wrap heat resistant tape around the object to =make the transfer?

@GomeowCreations

2 жыл бұрын

You can try, or just use the vinyl cutter to make a sticker.

Awesome info video! I etch a lot and I use toner too. The bubbler with low heat works fast and clean with ferric nitrate. Also, don't toss the used FN, even though a lot of people say it only works about 6 hours. Store it in a large glass jar and seal the lid with electrical tape and wrap the jar in towels or cloth to keep it away from light and depending on how often you etch, it will last so far for me, a year and a half. I etch a lot of pieces every 4 to 6 months. Each time it takes only an extra 10 minutes or so unless I add a small amount of FN to it. A big money saver for you I hope. I really enjoy the long videos with all the options. I'm now experimenting with steel etching with salt water for texture plates. We'll see how it goes. Lol...thank you so much! 😊

@sac7404

Жыл бұрын

Any pro tips for the toner engraving?

@tywhitmire860

Жыл бұрын

@@sac7404 I don't do a lot of engraving but plan to learn. If you're interested in an effective way to apply an image to metal, I highly recommend using PCB toner transfer paper. It works great for me consistently. Just be careful not to let the transfer paper move at all during the transfer or it will smudge. I use a hot plate turned on low and rub the image carefully with something flat like a popsicle stick. After you've tried it a few times on small images for practice, you'll master it. I hope this helps. Good luck with your projects!

@sac7404

Жыл бұрын

@@tywhitmire860 thank you very much! I will look into it and see if its available in my country (at the moment a lot of office supplies are not being imported), or will just try with the protector paper from some vinyls I have, just to experiment. Good luck for you too!

Can you please tell me how is this printer that cuts paper called and where can I buy one? Thank you!

@GomeowCreations

3 жыл бұрын

amzn.to/3mZKQJH this is what I used

looks good with the lines going through leave it alone nice piece of work even though it was a booboo, should not have told anybody should have just kept us guising

I have a fairly detailed design I'm trying to do. I have a Cricut machine like your Silhouette, but was considering using it to create a stencil I would then use nail polish or sharpie to fill in. Since I'm working with 0.999 Fine Silver, I needed to buy Nitric Acid. Do you think that would work alright?

@GomeowCreations

2 жыл бұрын

How fine of a design are you dealing with? Because you can cut some really thin stuff out of the vinyl on the cricut machine

@amyhancox2262

2 жыл бұрын

@@GomeowCreations I traced a dollar bill and converted it to an SVG file. Not all of the fine lines and swirls came through, but it's a fairly decent representation. I've found that I can weed out the vinyl stickers pretty well to be used as a stencil, but doing it in the reverse, to leave the small pieces there and removing the larger sections, is pretty difficult.

@GomeowCreations

2 жыл бұрын

Well it might be best to do it the way you wanted to using it as a stencil and filling it in with paint

Try a laminator for your heat source

@GomeowCreations

3 жыл бұрын

Yeah this is on my list of things to get lol 😅👍

How about ferric chloride?

how do you separate the design from the sticky transparent plastic after applying the design to the metal? 8:15

@GomeowCreations

3 жыл бұрын

so the Vinyl adhesive is stronger than the clear transfer sheet so it will just come off. Sometimes it will stick in spots that you didn't push down. If that happens just stop and stick it back down and push down on that spot more.

@gnamp

3 жыл бұрын

@@GomeowCreations makes sense. Cool :)

Does anyone know if you need to dilute the acid with a 2:1 ratio of water like many people do?

@GomeowCreations

3 жыл бұрын

I don't know if you do or not to be honest 😅

@tackywacky99

3 жыл бұрын

@@GomeowCreations I think I figured it out.. if you sand and clean the metal well before etching. Using a diluted acid to slowly etch is probably easier to control and make sure you don't mess up. A pure acid will eventually get through the impurities on the metal if not cleaned and then etch, but it might not be as even. So mainly the prep work on the metal is just as important as the etching itself.

Try putting the object face up in the tray and use a feather to brush the surface. Not kidding, the acid won't eat the feather and the feather won't harm the resist. You will get really sharp cuts. Also look around for resist pens. They work better.

you invested like spent like 15" for the sharpie and the nail polish... because you had already decided it didn't work that well... But all the toys... those really worked fine :D

@GomeowCreations

3 жыл бұрын

I have no idea what you are trying to say 😅

The amount of time you took with the Sharpie and nail polish vs the vinyl and laser printer determined the quality vs cost. Had you been as careful and exacting with the first two your results would have been much better whereas you took a lot of time with the other, more expensive methods and had some questionable results given the time and cost. I etch all the time with Sharpies and nail polish - virtually zero cost - with very good results. Still - lots of information here and I appreciate the amount of time and setup it took to create the video. I just want to make sure people know they don't have to buy a vinyl cutting machine to get really good, clean etches.

@GomeowCreations

3 жыл бұрын

Yeah videos like this are kind of hard to make with some many options going on it in. I think I said that they do work but you would have to spend a lot more time with the cheaper resists like the marker and nail polish. 😅

@sac7404

Жыл бұрын

Any tips for the toner method?

Laminator to heat transfer.

@GomeowCreations

3 жыл бұрын

Yeah that would have worked better 😅

Can we do this using battery acid?

@GomeowCreations

3 жыл бұрын

...no?

@Thiviru_premarathne

3 жыл бұрын

@@GomeowCreations Watch this video. He uses battery acid. Can he do that? kzread.info/dash/bejne/kYGMk6-eYJrLerg.html

@GomeowCreations

3 жыл бұрын

I honestly don't know what battery acid is bit I guess it makes some sense seeing that it's an acid. You can do it with vinegar and salt too if you are using electricity. But I would stick with the simple acids that I used in the video. 😅👍

@Thiviru_premarathne

3 жыл бұрын

@@GomeowCreations 😅😂

@Thiviru_premarathne

3 жыл бұрын

@@GomeowCreations what is the you using cuting machine call

Useful info but in all that detail, wish there was a bit more time on the actual acids used. 🙂

@GomeowCreations

2 жыл бұрын

Did I not say what acid I used in the video?

stainless steel wire too would be un safe

Acid for gold

Do you do any work For anybodyI am not good with a computer don't think I could do It I'm need logo For my knives I make If you do let me know good video Cajun Land Church Point Louisiana thank you

Can you send me chemical names

Porfavor posible translate in spanish??

@GomeowCreations

3 жыл бұрын

So I can't speak Spanish but I can understand it a little. I would have to pay someone to translate the video and that can be very expansive. 😅👍

@tortugakeskecapeutefaire3874

3 жыл бұрын

@@GomeowCreations no. But in.other video hay spanish translate writing in the video...and i think they don t paid...i m not thinking about ask you to paíd for translate..i m not so stupid...

heres a joke. for ya. ..."who reads or has magazines anymore "

@GomeowCreations

3 жыл бұрын

Haha you are right but I know people still get junk mail that has the same kind of paper 😁👍

Some of learn by watching. Pleeeeease.. Just show me?

@GomeowCreations

2 жыл бұрын

Show what?

I like the longer videos but not everyone have the same amount of free time probably at 30 mins would be even better

@GomeowCreations

4 жыл бұрын

I make them as long as they take with no time frame in mind when I make my videos 😂

@joshsingley

3 жыл бұрын

Speed the playback up and you can get it to 30 minutes... 😉(Shift + .)

Are u a professor?

@GomeowCreations

3 жыл бұрын

Nope, I'm just someone that wants to share knowledge with people. 😁