FYI I have found it much easier and more consistent to put the electrical tape on the inside of the Butler Creek just to add some friction. Instead of taping the NVG

@Gooberz710

Жыл бұрын

How you managed to get electrical tape even cut in half inside of the cap with the aperture is beyond me. Please make a video showing how you did this because I want to still be able to adjust my objective lens and not have it taped over…

@Iwillsurvive115

Жыл бұрын

Just a question what nvg is this what brand ?

@darth_1

11 ай бұрын

Fun fact if you buy the m32 m37 Iris it just twist no need for the lever and the Butler Creek cap fits directly over that with no tape. No dremel work needed

@UkraineForever882

Ай бұрын

There is only Kyiv; get ATACMS'd in Ukraine, cuckzap pig.

Glad there’s night vision nerds out there, I’m just one of those cave men that slap it on a helmet and am like “haha tube make night time brighter”.

@LarpingSupply

2 жыл бұрын

Stars cool ooga booga

@BrandyJay-lg4tq

2 жыл бұрын

laser rifle ooga

I just did this today, thanks to your video. I’m about to test it out here pretty soon. Thanks a lot!

Awesome timing man I have some showing up Monday, thanks for the vid!

This is great! I'm planning on doing something similar with my new PVS-14 now, thanks a ton!

thanks dude your awesome for sharing this. edit out the Dremel time and this is 11/10

I had no idea what the heck you were doing till the end😳 Nice! Job!

Dude so awesome... Thanks for your help

Sweet video keep it up 🤙

RIT liquid graphite dye does a good job on the red lever.

Here from reddit, nice work

Jesus Christ I had an anxiety attack watching that screwdriver shake so much. 😂

@LarpingSupply

2 жыл бұрын

I’ll tell you what I tell my wife when she has Anxiety “Just calm down fuck sakes”

@Brad-js7kq

2 жыл бұрын

The entire video gave me anxiety…

Lovely. Would be interesting to see a similar option with an epoxy magnifying lens. Don't get the stuff on your skin though and don't breathe the fumes - stir in a place with lots of airflow and a particle mask.

Thank you. This is great.

Really cool.

Pretty handy, thanks.

I wonder if you could glue the adjustable iris to the flip up lid? That way you could flip it out of the way when you need full light. The adjustable iris looks a little smaller than the full pvs14 lense. I bought the parts you linked, when they get here I'm gonna look at it. Thanks for the video

Great job! If I can offer on a tutorial video would be to slow down!! please, I needed a drink afterwards. But I will try again many thanks!!

Dude, Awesome Video… What tubes do you have?

I just bought an iris that threads on.

@friedchickenandwatermelon8307

Жыл бұрын

Hey man, could you please elaborate more on which kriss you bought and size? Was it for a pvs 14? Thanks man.

Definitely want to use callipers or be exact on where you’re cutting it especially if you end up using a sacrificial lens in front of the aperture instead of one of the screw in sacrificial lens behind the aperture. Figured the objective lens would be sealed off from the elements and dust/debris a bit better with a screw on sacrificial lens behind the aperture. Already ordered some more butler creek caps because I botched the fuck out of the first one though. So just be careful. I know the flip cap is only $8.99 on some sites, but still sucks to not have an extra in case you fuck up…. PS they’re constantly going out of stock and went from $9 to $13 and some change on Amazon haha wonder why

Nice DIY solution. I'd be hesitant ussing it in rain though. Seems like you could get water buildup in the lens cap.

@epapa737

2 жыл бұрын

You could probably water seal it if you really wanted

Looking these up, so help me out here gents: these are basically aperture devices that allow you to have a shorter length of focus and therefore allow you to see much clearer with nightvision on, correct?

@snake6221

6 ай бұрын

One year later: Correct, lol. Clearer at short distances.

Do you lose FOV?

Does this reduce the overall lense size enough to lower the light gathering and fov on the pvs14? It doesn't look like the iris opens up to the full size of the pvs14 lense.

@LarpingSupply

Жыл бұрын

Correct but it’s negligible and easily reversed by simply removing them

Hahaha this is awesome

Damn, 1 month to ship that iris.

Buddy of mine hacked his finger halfway off with one of them little zipdiscs, be careful dude. Wear some cheap goatskin gloves lol.

This based on the written tutorial from teamVOA?

@LarpingSupply

2 жыл бұрын

No but someone on Reddit walked me through this.

Sucks you'll be giving up slight light transmission no matter what, I wanna see a version where the actual iris flips up so you gain the entire objective lense, with your mod even the mat block tarsiers you lose like almost a quarter inch of the outer edge of the objective lense, while some might say who cares, that might make or break you seeing something in a no ambient light place , gonna need all the gain you can get

@berkharbin6642

2 жыл бұрын

You could probably modify it to mount the iris in the flip cap with a little 3D printing.

@3o5wasabii

Жыл бұрын

clear tape

@Ejinikus

11 ай бұрын

Take it off if it gets that dark?

hey bud where did you get your tubes in Canada

@LarpingSupply

2 жыл бұрын

No

@turgunusanga5808

2 жыл бұрын

Cold Harbour Supply for instance

Do not use a qtip on any lenses. They can scratch lenses pretty easily, they even scratched my ACOG's lens.

Do u made me lol!!!!

I was looking at some gentleman’s Instagram. He offers this thing for $95. Doesn’t include the adjustable iris. Fucken you here showing how to make one for $50 with shit from Amazon lol. Thank you

@LarpingSupply

2 жыл бұрын

This thing ain’t exactly the most “ideal” but it works for LARPing

@votago

2 жыл бұрын

@@LarpingSupply Larping is all I do. I can’t afford to oper8. Too poor

@LarpingSupply

2 жыл бұрын

@@votago if I was kicking in doors the tax payer would foot the bill anyway lol

@votago

2 жыл бұрын

@@LarpingSupply I wish I was kicking in doors instead of laying in bed with my helmet on waiting for the sun to set lol

Does this work for dtnvs from steele?

@LarpingSupply

Жыл бұрын

Yes

@dr.doofenshmirtz9501

Жыл бұрын

@@LarpingSupply same aperture and everything? I need a size 17 cap so will it fit those size caps snug?

@dr.doofenshmirtz9501

Жыл бұрын

@@LarpingSupply what size aperture for a size 17 scope cap?

what's the point of the iris?