Hello fellow 156 owners, it's a pleasure to see your beloved cars being taken care of. Share links to all your vids when doing stuff to your cars, even simple stuff.

Thank you! Coolant lamp died so gonna be doing this soon.

Just got my self a beautifull 156 after owning a fiat coupe 2.0 for a couple of years. It has a few electronic problems, for example the headlights dont work properly, and basically everything you showed in the video. So thanks for making this kind of video!

@Gabriell0684

5 жыл бұрын

hairgelvic electric problems are unfortunately very common on these cars.

Thanks for the video you helped me a lot. It can help. So I took out everything to see if I needed to change the light bulbs. I also need to change the lights on the ventilation so I'm wondering how to get it out

Very easy, I changed a burning lamp of ma tachometer within 10 minutes, thank you!

@Gabriell0684

5 жыл бұрын

Thanks for watching, and especially glad that I could help someone!

Such a nightmare to change those lights 😂 But it's worth it, I just replaced my bulps and installed a new radio. I got the same as yours an Alfa Romeo 156 2.0 TS sport with carbon trim, lowered and skirt(Mine is just black and a sedan). Always glad to see an alive alfa 156👍

@Gabriell0684

5 жыл бұрын

Yeah, these cars were not really designed with maintanability in mind, but still, they are not as bad as most would think.

@SwiffyDK

5 жыл бұрын

For sure repairing isn't made the most easy way! I made some rust work on my alfa for the first time in 19 years. So i would't say they rust that much as people say (I live in denmark where it rains or snows most of the time) I have a question, i saw in another video that you talked about that you changed the badge in front and back. Are the badge replacement hard to replace? Because my badges is completely faded 😂

@Gabriell0684

5 жыл бұрын

Swiffy people say it depend a lot on the region the car comes from. I always hear that all cars from Austria rust a lot. Mine is more or less fine.

@SwiffyDK

5 жыл бұрын

@@Gabriell0684 Is the badge hard to replace in front and back?

@Gabriell0684

5 жыл бұрын

Swiffy the front one I used to drill trough, and once I got a hole in it, I've just pryed it off. The badge itself in the front consists of 2 parts, the thin badge itself and a more thick part that is held in place by two pins, you need to break them when taking off. The rear one can be tricky. Either you try to pry off the thin aluminium badge from the plastic turning part, but then you risk breaking it, or you have to take down the door panel to get to the door lock from behind. Then you get access to the small ring that hold the turning thingy in its place, take off the ring and get out the badge. In my case the rear badge was already broken, so it was easier for me :)

I was planning to change all my dashboard bulbs for LED variants. Many thanx for the tutorial.

@Gabriell0684

5 жыл бұрын

Raysboss302 Glad that I could help :) Hear some bad feedbacks regarding the LED swaps. I am not good at electronics but it has something to do with the overal electrical setup of the car. People say LEDs die more often as they should. I wanted the original looks anyway, so I just went for the standard bulbs.

@Raysboss302

5 жыл бұрын

Thanks for your reply and warning. Ik only go for the exact same specs, I just want a somewhat brighter light. My Alfa is original too except for some OZ racing wheels.

@Gabriell0684

5 жыл бұрын

Raysboss302 I like my stock 16" Teledials, but OZs must look cool.

@Raysboss302

5 жыл бұрын

Alfa 156 2.5 V6, cognac leather interior and that dark metallic racing green. Amazoniola green or something. With white 17’ OZ racing rims. Before summer starts I make a nice KZread video.

Make sure to change the heater control bulbs as well, while you have everything off. They are located inside the white box and of a different kind that the others. Not the funniest thing to unscrew and as you said. The plastic is brittle.

@Gabriell0684

4 жыл бұрын

I had no issues with those lights so far so I did not bother disassembling those but it really did not look too much fun to take apart.

Congratulations! Perfect work! I want to change these bulbs on Alfa Romeo 156 of my friend's car. Could you tell me the type of these bulbs so that I could to replace them with a new led bulbs? Thank you in advance

@Gabriell0684

Жыл бұрын

Try searching for t5 W2x4,6d bulb. They are really small, you can have them as LEDs as well, but those don't work too well from I have heard.

Do you guys know how i can turn the green lights in my alfa to white? Do i need just to change these bulbs?

How did you manage to get the orange lightbulb out? You said you needed to twist it? And than pull?

@Gabriell0684

5 жыл бұрын

hairgelvic yep, twist and then pull, but just a little. I have a set of pliers, I guess officially they are called needle nose pliers, I used them to pull the orange thingy out.

Thanks

@Gabriell0684

4 жыл бұрын

liquid0001 (Squadalaxd) Glad to help!

@liquid0001Squadalaxd

4 жыл бұрын

@@Gabriell0684 where are you from?

Are the gauges in the middle exchangeable with a 159?

@Gabriell0684

3 жыл бұрын

Never tried, but I don't think so.

Hi, I need to change one backlight of the heating controls, the one on the right side where you can adjust the airflow. How can I do that?

@Gabriell0684

5 жыл бұрын

rickl3n hey, I have never taken those apart, but I guess you need to take out thewhole unit to change those backlights.

@rickl3n

5 жыл бұрын

@@Gabriell0684 Thanks for your reply! I can't find anything about it. I'll guess I try that.

@Keroppikun

3 жыл бұрын

One of my heater lights was out for seven years or more. I couldn’t be bothered to take the whole thing out so I’d occasionally flick it or even bang it but pretty much gave up on it ever returning to life. One night recently it decided to light up again. After 7 years or more!! Love my Alfa even more now. Third belt now and over 19 years of fun use with my 156SW 2.0 Selespeed.

N286 bulb is also a T5 bulb correct?

@Gabriell0684

Жыл бұрын

Yes, I believe the standard is T5. The marking on the packaging I had was W2x4,6d but it seems to be the same thing.