Changing Height of Cut, Backlapping, and Adjusting the Reel to Bedknife on a Toro Greensmaster 1000
Тәжірибелік нұсқаулар және стиль
In today’s video I cover how to change the height of cut, adjust the reel to bedknife, and backlap a Toro Greensmaster 1000. I just recently scalped my lawn in preparation for a lawn leveling project and now it’s time to do some maintenance on my mower to make sure it continues to run smoothly. When I scalped I had to lower my HOC, so the first thing I’m going to do is raise the HOC back to around .55”. After changing the height of cut, I’m going to backlap using 80 grit and 120 grit backlapping compound. After backlapping I’ll adjust the reel to bedknife and test the sharpened reel on a piece of paper.
#lawninsider #greensmaster #bermudagrass #reelmowing #texaslawn
Lawn Insider Merch Store: merch.lawninsider.com/
Bermuda Maintenance Calendar: lawninsider.com/bermudagrass-...
Products discussed in today’s video:
Backlapping Compound Kit: amzn.to/3AEi77u
Mo Deck Spray: amzn.to/3RnQB45
Products I use:
lawninsider.com/lawn-products/
I may receive compensation if you choose to purchase any of the products linked above. This comes at no extra cost to you.
Chapters:
0:00 Intro
0:25 Changing Height of Cut
4:50 Backlapping and Adjust Reel to Bedknife
10:25 Cleaning the Reel
11:05 Cutting Paper
12:13 Mo Deck Spray
Пікірлер: 42
I just bought a Greensmaster 1000. So thankful for this video!
@LawnInsider
Жыл бұрын
Congrats! You’re gonna love it!
Nice pile of sand! Great teaching video. I just spread a pile of manure on my yard for the first time with my wife and 5 kids to add more organic material on top of my basically pure clay soil base. Sand is next after the manure stimulates some fresh health green growth.
@LawnInsider
2 жыл бұрын
Can’t fake time in the lawn 💪
Appreciate the video. Just helped me refresh on backlapping my toro.
I’m eyeballing these on Facebook marketplace and I want one badly
I now have the same hoc gauge setup you have and it’s a great tool. Thanks for your videos!
@LawnInsider
Жыл бұрын
Awesome! It’s a great tool. Makes changing the HOC a little less of a hassle.
Another great video! Your son's growing fast man! Can't wait to see how fast your yard recovery is with no rain and water restrictions. My yard is just barely filling in since my sand lvl project last month.
@LawnInsider
2 жыл бұрын
It will definitely be interesting. I’m gonna hammer it with water on our one day this week 😂 he’s growing like a weed! He’s a wild man.
@timborski1210
2 жыл бұрын
@@LawnInsider Yeah i got my system set up to just run as much as i can lol.
Very helpful. Thank you!
Great demo, intro and summary, very useful
Super helpful video as always, thank you 🙏🏻
@LawnInsider
Жыл бұрын
Thanks Brunsy!
Saving this video for an upcoming GM purchase. In your opinion is a GM1000 a sufficient width for a 6500 sqft yard? I’m torn on 1600 vs 1000.. and the 1600’s are much harder to come by.
As you have the reel running in reverse and applying compound at the same time, go slower!! As you are applying the compound at that speed it’s just flinging the compound off. What I do is apply the compound then spin in reverse. Then STOP and apply more compound, then go in reverse again. Basically what I’m trying to say is only apply compound when the reel isn’t moving so the compound does fly away
Where do you get your reel ground at? I am in SA and called Silverhorn but they said they wont grind. Thanks
Spray some roundup on that grass growing in the expansion joint between the driveway and slab. 🤣🤣
@LawnInsider
2 жыл бұрын
Haha you’re right. I use it as a reminder to show how tough bermuda is 😂
Hey Rhett! Looks like you has a little helper who wanted to help you 😉
@LawnInsider
Жыл бұрын
The best assistant I could ever ask for! He's a busy body no doubt!
How many blades on that reel? I’m probably going to buy one with an 8 blade.
What attachment do you have located right behind the front roller?
@LawnInsider
2 жыл бұрын
It’s called a scraper. It came with my mower and I doubt mine does very much at this point.
Great video. Where can I get a gauge like that to measure HOC?
@KA-dm9lm
13 күн бұрын
I just bought that same one. Accu gage. Expensive but buy once, have forever.
You have the link to the 1/2 socket adapter to backlap?
@LawnInsider
4 ай бұрын
I don't, but I picked mine up at Lowe's I believe.
Great info. If you don’t mind im asking is how long is the gauge? 18 inches?
@LawnInsider
Жыл бұрын
Yes it is.
They do make a back lapping reel machine. And using 80 grit then 120 a waste of time. I'm a head mechanic at a golf course and have over 30 reels I work on.
@LawnInsider
Жыл бұрын
Thank you for the info! Appreciate you commenting.
Remove Spark lead would be a better disable method ... Fuel Cock off your motor would still fire up ....
You changed your HOC after back lapping, correct? Should you not have back lapped first then set HOC?
@LawnInsider
Жыл бұрын
Changing your reel to bed knife shouldn’t have an effect on your HOC adjustment. So in this case I don’t think the order matters much.
@nmsauditor1a950
Жыл бұрын
When you move your bed knife closer to your reel, you are moving it up and away from the turf, effectively changing your HOC. By how much, very little I suppose. I believe each click on the adjuster is 0.007". Three clicks to adjust would be 0.021". I like your content, keep up the good work!
I notice with my reel mower that if the reel to bedknife contact isn't somewhat tight it won't cut paper but when i tighten it does. The reel doesn't spin freely like I've seen in some videos. Is this normal or do I have to backlap?
@LawnInsider
Жыл бұрын
It’s normal. In fact, I’ve noticed when I get mine serviced, they always have it tighter with the bed knife than what I am accustomed to. I still usually will loosen it some before mowing. I’ll just adjust it based on the cut quality I’m getting.
@hectorrios1918
Жыл бұрын
@@LawnInsider Thank you!
I have a r&r brand back lapping machine that I never use.
@LawnInsider
Жыл бұрын
A machine? Sounds like a pretty cool setup.