CHALLENGE | Unknown Metal |Wakizashi My Way - Part 1!
Ойын-сауық
Join me in an online teaching experience about bladesmithing and the unique artistry it demands. Learn some of the most coveted techniques in the forging industry from the comfort of your home!
Web - www.knightforgestudio.com
IG - @jasonknightknives
FB - / jasonknightknives
Пікірлер: 239
Jason has the ability to explain and remain natural, not trying too hard to be funny or sensational. A really instructive, pleasant, and enjoyable channel.
@seanhardman1964
4 жыл бұрын
he seems stoned
@knusprigebeute2313
3 жыл бұрын
..."the taper is 70% less as we approach the tip"...??? ok :D
@travishopkins9719
3 жыл бұрын
@@seanhardman1964 well if he is stoned I wish I had even half of his talent, and skill, sober as he has while baked!
Watching you establish the two tapers and your bevels all with and on the hammers was, honest to God, a wish come true. I have watched many a smithing video and I've never seen it done so thoroughly, or carefully, anywhere. Thank you, sir Knight, for making an old man's wish come true. Damn fine camera work! Looking forward to seeing you finish it
This channel is gold.
Your blacksmithing skills are insane, and I mean that only positively. I've seen a lot of people forging, but you're the first one I see who is at a much higher level than my teacher who has forged for over 40 years. You would like him if he hadn't died a few years ago and had ever spoken a language other than German. But if I think more carefully, there is a common language, the language of the singing hammer. He spoke it, you speak it and I understand it a little ;-) Sry for my bad english, I had to use google to write this comment.
Jason, between the FORGED instructional videos and your KZread videos, you have established yourself as one of the top instructors for bladesmithing. I am proud to be your student. Thank you.
Fantastic! Also, your video team do a wonderful job of getting in there and making it really easy to see what you're doing, and how the metal is moving.
Extremely educational content. Thank you for sharing Jason. It’s greatly appreciated 🙏🏻
Man... this is so good! Love watching a master at work!
I waiting and waiting and waiting, no 2 yet. Nice videos? No Great. I just heard a voice back in my head "A matching pair"!
Incredible session as usual. Love the interplay between power hammer and hand hammer.
Can’t wait for part 2 ! Enjoying the videos thx!
Great video, learnt loads again, great camera work to, top class
Amazing job sir. Once again you prove how great a bladesmith you are. Cannot wait to see how this ends up.
Hahaha that's a great pencil sharpener! Awesome video jason as always ! Hopefully you do a live stream this weekend !
Outstanding ! Im working on my 2nd wakizashi now, longer blade and a recurved handle. Great work Jason!
Brilliant to watch you Jason. 🇬🇧👍👍
I always did love to watch you play.
I like the close up real time blows. This helps me understand how the direction of your hammer and face of hammer moves steel.
The quality of the videos keeps getting noticeably better. Really like what they did there with the camera following the power hammer. As always great quality craftsmanship! Keep em coming to stave off the quarantine boredom.
Excellent!!! I like your presentation style as in no nonsense and unnecessary babble,clear technique and process without hype and gloss!!!
Mr Knight thank you again for another amazing Video!
Best effects in the video work I've seen in a smithing video. Props!
It's the Apocozashi! Love it, I've made short swords out of rail clips.
Soundtrack is just something! Loving your videos, master Knight!
So nice to see the metal moving and how you are guiding the shape. The shop in CA I go to for forging classes is on hiatus due to shelter in place and I’m missing hitting metal. Props to you and your camera guys.
Good work Done 👍
Right on my low country brother .... great to see your success after these years
This is one of my favorite channels
I use this stuff all the time. I am glad that you said about the normalizing comment because I was blasted on a blacksmithing page on facebook saying I was wasting my time and fuel because when it reaches 800 degrees the steel doesn't remember what it is anymore. But I kept saying no you want to normalize. Then was told I didn't know what I was talking about lol
@jasonknight8647
4 жыл бұрын
The Coal Dragon Forge 1600-1500
@TheCoalDragonForge
4 жыл бұрын
Jason Knight I’m glad you agree my friend.
@jackparkinson4284
4 жыл бұрын
Leaf springs always want to be a leaf spring without that normalizing step
@TheCoalDragonForge
4 жыл бұрын
Jack Parkinson tell that to the guy who was arguing with me lol
This is going to be sweet, can't wait to see the next part.
Great video. Nice job man. I have one of those railroad clips in the shop. I’m on it. Have a good one
As always very cool brother 💪👊
Jason moves metal like it's nothing. Really a pleasant thing to watch and be in awe at.
beautiful work, thank you, subscribed!
Yall are killing it. Loving everything so far. There is just on problem though....not enough. We need more. Thanks for all yall are doing. It is awesome. Learning some too :)
@jasonknight8647
4 жыл бұрын
Logan Sumrell There’s another episode after this shows the finish
You're just going to leave me hanging after all this???? Honestly, I love your videos. They have a lot of quality production value and I really like your personality. Once I find a place in Cincinnati to set up a small work area I'll be buying your online class for sure.
Intense music! Loved the shot that followed the power hammer up and down a few times!! Awesome video as always^^ GG Well played!
Ive made stuff out of the spring clips before, and man are they tough to work with but strong as hell. Im hooked already 🤘
Great channel. Production level and editing are top notch quality. Your natural ability in front of the camera is terrific.
Love your videos! Started following you recently on here on Instagram after becoming completely obsessed with Forged in Fire! You and that show have inspired me to get into this craft. With a very strong welding and fabrication I think this will give me a pretty good jumpstart!
it's amazing you share you'r knowledge whit us sir thanks alot
Man jason is a fucking boss. We need tons more of these mysterious metal challenges.
Best pencil sharpener ever!
With your production value, skill, and comedic ability alone, you should have 10 times more views
That material looks difficult to move even under the power hammer. I really enjoy your channel for it’s production quality, entertainment value, and the opportunity to learn a thing or two. Thanks for sharing. 👍🏻
Looks beautiful already
in the UK those are round and they are used to tie rail track to the hardware in sleepers , really hard steel to hard in fact to weld without pre heating , it just snaps either side of a weld i made a rotating sculpture out of some once, they serve a similar purpose in the states i assume just a different shape from an older system of laying track.
@tehbonehead
4 жыл бұрын
In the US they're called "Rail Anchors" those look like Unit Spring type. Fairly tough stuff. As to the shape, there are several popular types used in different applications and to the preference of the particular railroad...
It's a rail tie clip we call them dogs. They're place on the underside of a railroad track next to the ties to keep the ties from sliding.
@jonahjohnston6909
4 жыл бұрын
Thanx dude, I have a bunch & have always wondered just what the hell they are!😁
I like the format with the background music.
I like how you (Forge 2 Finish). instead of makeing a billet ,then grinding out the pattern.
You're a boss Jason. Congrats.
I like it Jason! I would say yes Apocalypse style
Hello I enjoy your videos I am 12 years old and I have been forging for about a year now but thanks for the expertise!
@JasonKnightMS
2 жыл бұрын
That's great! Keep it up. Both of my kids, now young adults, are bladesmiths. My son was about your age when he really started getting into it, my daughter was a few years older.
Jason this is a rail creeper old stile it is steel , I am railroad guy recognized it right away ... good channel man
@bustedford
4 жыл бұрын
Rail anchors👍🏻
@Grof2000
4 жыл бұрын
@@bustedford we call it creepers
thanks for the inspiration and knowledge
@benengel1687
4 жыл бұрын
@@JasonKnightMS I think I'll go forge something right now :) out of an old leaf spring, so kind of an unknown too, right?
Nice. Its fun to make somthing of trash. Me and my son are making two post apocalyptisk trench knifes of some old leafsprings
I like it! 😁
I have enjoyed watching you work for a few months now and I have nothing but respect and admiration for the talent and composer you exhibit. I am not trying to be cynical, although I will sounds it. I have not seen a blade yet, just shaped steel. Do you have plans to show any of the finishing because I , and i'm sure others, would enjoy seeing what and how you get from these beautiful shapes to a finished blade. All stated, I will anticipate your future videos and continue to enjoy past videos i have yet to watch. from a forge aspirant in Wisconsin, keep up the fantastic work Sir Knight!
@tuckerabbott
4 жыл бұрын
The title literally says part one lol
@StellarManta
4 жыл бұрын
@@tuckerabbottnoticed that after and I couldn't figure out how to edit. My statement still stands lol
I work with those spring clips all the time they are similar to 1060-1070 high carbon steel and when made into a knife they hold a pretty good edge.
@jessebond4221
3 жыл бұрын
They are 60Si2Mna similar to 9260 they havent been made from 10xx steels in over 80 years
Hi Jason lovely work there bud.That is called a rail clip if I were a betting man I would have said 1060 as the steel type funny we also use the round types around these parts and I picked up a bunch of them just 2 days ago.
I got my first forge going last nigh It's a cast iron sink I got from work packed with dirt right now but it works. I was so excited when saw scale falling off when I was working. I've never seen my steel so hot before
I love the Hawaii 5O music at 15:00.
I had a friend give me seven of those pieces of that steel you used for this video, I'm excited to try to make something out of them now
Those hammer swings alone are fun to watch.
Dope vid series
Waaaayyy better than forged in fire. All the content, none of the drama BS.
Thanks for shering.
I love working with spring clips. I’ve made lots of blades and tools out of them.
No Sleep till Hammersmith! :) Great Work! Will you do some differential hardening, or just heating up and Quenching?
Absolutely bad ass
You should make a video with tiger lily
Great shape! Any zombie would happily want to go out this way!!🧟♂️
The fireproof wooden ruler. A classic blacksmithing tool.
The camera tracers were a nice touch 🤘. What are you doing with that Sabian cymbal? lol. Looks like a large splash or small crash 😅
I've been looking forward to this video. Quick question. Around the 6 min mark could you use the vice to flatten the metal instead of the hammer or were you looking for more info on what type of metal it was?
@jasonknight8647
4 жыл бұрын
NoVa JB I’m just trying to figure it out
This is so much better than forgedinfire even the first few seasons or however many Jason was on! Thanks for the education, inspiration and great video content Jason and team, keep em coming
I used to find a ton of those rail clips along the railroad tracks when I was a kid. Never knew what to do with them but I collected a bunch of them.
@LPJMagicmusic
3 жыл бұрын
Isn't it funny what you'd collect as a kid? I found the weirdest stuff cool and needed to hoard it😂
@jesusisalive3227
3 жыл бұрын
@@LPJMagicmusic Yes! Lol my wife still thinks the stuff I collect and save is weird lol
Those are anchors used to keep wooden RR ties from moving and sliding once they are spiked. They’re mainly used close to railroad switches and frogs.
I REALLY wish he was still a judge on Forged in Fire when they started having the competitors compete against a judge. He would have wiped the floor with them!
Never had the opportunity to see hot steel in person and was curious if it bothers your eyes after staring at it for awhile? Always wondered , been binging forged in fire , lol.
Great video ! And it will be a awesome wakizashi ... do you know some smith in Canada... or even in Québec 😅
Wicked knife 😁😎
Dude! Quick question that’s totally unrelated to this particular video. You posted a vid about folks freaking out about a 1200.00 chefs knife. That knife you held in that video has a bevel right at the heel/choyle. How do you do that? Is it hammered in or ground. I’m struggling with that particular spot.
@jasonknight8647
4 жыл бұрын
James Smith I don’t remember I’ll have to go back and look at it
Hey there! Just subscribed, can't believe I follow like four other blacksmithing channels and never ran into you. Your work is amazing, and honestly the way you present and explain it, so great. If I can make one little suggestion, it's that it would be great if the music was a bit lower when you're talking. It's not bad enough to drown out your voice, but I think it would fit better with a little less volume. Just a thought, and a very minor nitpick, but regardless, amazing content, man, you got a sub for the long run ;)
I can't wait to see how it turns out. I got a bucket full of various railroad steel, including those rail anchors. I was thinking of doing a bearded axe made from 2 spikes with a rail bit for the edge.
If I remember right, those rail clips should be right around 1060 per AAR regulation.
@jessebond4221
3 жыл бұрын
Im unfamiliar with AAR... Not a u.s.a designation? In the u.s. we use AREMA specification and its 60Si2Mna ...similar to 9260 (a bit more pure of an alloy)
awesome bro! I want to do this shit bad!
Track anchors are 400 series steel which I use to make knives. I like it!
Music 🎶 definitely a nice Touch
Hi Jason, after straightening you let it cool down. Is that to stress relief or for grain size or what is the reason? Sorry if you mentioned why, I missed it. Thanks, Bjorn
This was awesome as I have some of those clips and was looking for ideas on what to make with them. What quenching oil do you use? I have been told as a starting blacksmith that canola oil works well, is this true?
@jasonknight8647
4 жыл бұрын
tim Vallier peanut oil is ok
@jasonknight8647
4 жыл бұрын
tim Vallier I used aaa quench for this blade it will be in the next episode any day it should be ready
@timvallier9701
4 жыл бұрын
Amazing thank you for the information.
Those clips are actually railroad track anchors and they normally are used to control expansion and contraction of the rails. The railroads put an anchor on both sides of every tie for this purpose
I wish there were more links when Jason brings up other blacksmith their Facebook and Instagram
THAT'S A BAD ASS SWORD
Great hammer work, I like the shape. Once you've completed it you can ship it to me. LOL
Hey Jason! You have to make one katana with the traditional ways, with tamahagane!!!
Wicked dumb question...But will this be available??
Nice! Rail clip tonto. I have a machete that I have made out of the same material. It has held up quite well.
I want to know how I can get a day in your shop working and learning from you