Love the channel. Just bought my Cforce 600 today. Can’t wait to rip it up!!!

Yeah man. This is a great video. I just put 32s on my 950 and it's great to see all the options that are available for the overall performance of the machine. Thank you very much.

Dang Airdam Clutches is on the ball!! I live in meridian ms and i ordered my clutch kit yesterday at about 3 pm and it arrived today at 10:30am. Can’t wait to install

@RealTalkPowersports

4 жыл бұрын

That is awesome!!!

at 8 minutes... thats my only problem with my 2020 cfmoto 600. You described what im feeling perfectly!

Great video. Going to give him a call. As my wife just smoked the belt on her Zforce 500trail, so I guess this would be the perfect time to get the clutch done after putting 28inch bkt 171 tires on it.

Great explanation of how the CVT works to those of us that have just a basic understanding. "At 5% throttle, it's shifting into 2nd or 3rd gear, this boggs the motor down"

Great info. Another wonderful and useful vid. Thanks Blake!!

Great video as usual! I like how thorough he was in his explanation. Looking forward to the follow up video.

@RealTalkPowersports

4 жыл бұрын

Thanks Ralph! And thanks for your continued support and encouraging comments! It means a lot!

Just got a CForce 625 (same as 2020 600 in the USA), very interested to hear Adam talk about it and can't wait to see your post on the install - I'll definitely be contacting Airdam, as he is spot on with the 600 diagnosis. Hope they can post to Australia! Thanks for the videos...

Great vid and a ton of great info. Brother u keep doing ur thang and you are going pleases. Thanks for sharing 👍

@RealTalkPowersports

4 жыл бұрын

Thanks brother!!!

Great video I just emailed Adam for info on a kit for my zforce 800ex I upsized tires and devolved an odd bog hesitation on take off

I just got my 600 cforce on Friday and it's exactly like he described

Come on Blake I've been following you I could send you pictures if you want I got my 30-in cryptids on here you got to tell me what stages he went through on your clutch so I can either send it out or do it myself. I took one hell of a ride yesterday because of Corona virus I could take the river right down much further than I ever could before because they're not closing the locks. Is one of the best rides you've ever had but I need to know what I got to do so I don't burn this belt up cuz I can tell that there's definitely more weight on these tires. Help a brother out awesome video again thank you for doing as much as you have been doing for CF Moto and enjoying it. You been the man

Nice video. Can’t wait to see it done and your thoughts on the ride.

A lot of good information

That's a shit ton of GREAT information!!

Nice job guys!!

You guys are awesome I just bought a cforce 800 3 weeks ago went trail riding last weekend this machine. Awesome you guys have made it great do you have the information to work on this thing need to do a brake job on your 800 so I know how to do that LOL keep up the good work

Thanks brother.

Great video

@RealTalkPowersports

4 жыл бұрын

Thanks alex!! More to come and some after mod action

Good video, thanks.

Cool tutorial. Thanks

@RealTalkPowersports

4 жыл бұрын

Thanks Chris!! More to come soon

Absolutely excellent video! I just wish I would hear something back from Adam. Finally did get an initial reply to emails asking for details, riding style and conditions, etc., I replied and then nothing. Haven't heard anything more from him in several weeks now. The penny trick it is I guess.

@block_a_hoytt

2 жыл бұрын

What's the penny trick.

@KakarotsSpirit4

2 жыл бұрын

@@block_a_hoytt you use pennies in the clutch instead of weights I think.

@block_a_hoytt

2 жыл бұрын

@@KakarotsSpirit4 wht I thought.

Can’t wait to see the next video on installing the kit for the cf600 I will be calling Adam

@RealTalkPowersports

4 жыл бұрын

Im making videos for it now.. You can call Main Street Cycle and they will have my exact setup in stock and can ship it to you. Adam from Airdam Clutches has sent my dealership a whole bunch of the kits that he setup on all our CFORCEs

Yes, great video, I actually have already saved and watched the video Adam does, the only thing is I guess i need to hit him up and see what i need to do the exact thing ya'll are talking about in this video, cuz my 2019 600 is doing the same thing.. its squishy

Like the video emailed the company to find out what kit to buy for my ct moto 600 and never heard hack from them .shame seemed like a good place to do business. I guess I'll buy from another company.

very helpful boss

@RealTalkPowersports

4 жыл бұрын

Thank yoU!!

Great video, I just bought a cforce 600 and it feels exactly as he was describing. Please link me to a kit I can buy! I've got a garage full of Hondas including a new Talon X4LV. Decided to give cfmoto a try, going from a gearbox to belt drive is such a HUGE difference. I need this cforce to feel a little more responsive. Thanks!

That's good information, cvt always have been mysterious for me, I mean, I have changed roller on my atv for having more rpm by taking lighter one, but it look like there is so more we can do to help the motor to give his maximum, I will give a look at his video. BTW I have learned something today, the 600 2020 will be available in France only as the touring version. I don't want a long chassis, so I can forget CF Moto for my future atv, I am a bit sad cause now that outlander or sportsman 570, the only 2 that are interesting for me, not a lot of choice...

@codywright54

3 жыл бұрын

i have the 600 touring and honestly its actually the best i have rode! crazy it will go through most muddy situations less than a 1 foot deep without 4x4 its definily a worthy buy

What weight flyweights and spring was primary changed to on 600?

Awesome videos availability seems to be only problem with parts during this time

UForce 1000, what do you recommend if I want super smooth take off and engagement at lower rpm.Don’t want to loose a lot of top speed, but I don’t off road hard. Just some trail riding on sand from time to time.

Hi. great review and explanation. i just purchased a 2022 cf moto 600 touring. I am noticing the atv is revving very high at low speed. Its up around 5000 rpm when doing around 20 to 30 kph. Also seems as if the engine is very loud. Is there anyway i can lower the rpms while riding at these speeds. It just seems like the engine is working way to hard at low cruising speed. Any help would be greatly appreciated.

What do you suggest for a 2021 CFORCE 500. All stock. Trail ride and dirt roads?

A question: I found this video because I need to learn more about ATV engines. My problem is that I would like a much more "spongy" engagement of the throttle. On my 850 XC it's really hard to drive very slow and precise. What mods would you recommend then? A harder spring on the primary so it does not close as fast, hence slipping more in the start?

Would getting 20 gram weights and a 250/900 primary spring be good for a 2021 cforce 600t on stock tires just want better throttle response and lower the RPMs

Awesome video I have a 2020 600 touring and I love it but on one of my trail rides I lost a dust cap on my rear wheel and every where I look even on cfmoto web site all I can find are parts for 2019 and not 2020. So my question is where can I buy parts for this model

What is the sweet spot to get the spring/weight right in these cforce 600s? If we wanted to keep it stock, is it possible to just reclock the secondary so it doesnt bog down at 5% throttle?

my cforce 600 touring 2021 needed a 18mm and 32mm not 30mm for primary and the weights were made out of alum not steel and only weighted 10 grams each.they filled the hole in the slyers compleaty???

Do you have to take off the primary to take of the secondary clutch ?

Hello bro, how should the roller weight of a cf moto look like? heavier or lighter? Thx

Hi, a year ago I bought a cf moto 600. After driving 600 km, the clutch began to knock. Is it normal in these cvtech clutches?

I live in utah home of rockies looking to get kit and what to clock secondary clothing to to make it smoother off start and climb run hills in our neck of woods with out killing all the top end

I am in utah running stock tires want to get it to engage smooth and set up to climb in mountains on tight trails. Can I get it better re clocking secondary

I have a 2019 Z force hwin 1029" tires what can I do to make it pick up and go a little bit better I do a lot of trail riding up hills corners seems to be a little boggy I want more peppier Almost like it's taken off in high gear

Hello. I have a segway snarler 600l. Can you suggest what to change in the variator to become more powerful. And where can you buy? What details are needed? Spring? Weights? How much weight?

Will the right side bolts loosen if drive belt has snapped, pully just spins when impact is engaged ??

What size socket for the secondary on a cforce 500?

What do you guys use to remove the fixed sheive pulley. I have this cf moto z 950 that I have to replace the CV housing inner cover.

I own a 2020 cforce 450l but the fuel consumption is scary at 10l/100kilometres. Whats the rule of thumb that can reduce the fuel consumption?

Hello everyone , how should the rollers in the variator be heavier or lighter? To have better acceleration and have more climbing power.

I’ve got a 2018 820le but you guys don’t do a clutch kit for it. Do you think it’s something you might do in the future? I would like one.

great video! how do you keep the clutch from spinning when removing the bolts?

@planeconch7878

Жыл бұрын

It's a little late but use a impact gun. Works a charm. But before I bought one I would wedge a breaker bar against it

Great Viedo he needs to add turnaround time for cluch mods. The price of these mechains are great and with a little mod you can get enough power to hang with eveyone. Yall need to link up with a big channel Like SXS blog and have a good day of it so folks can see this is a good toy for not so much money

@RealTalkPowersports

3 жыл бұрын

That would be cool.. I have been a SXS blog fan for over 3 years.. Pretty much have watched every video. Id love to go up there with some of our units and ride with them and run the new ZFORCE on their Gaunlet track.

@michaelschnitzer4054

3 жыл бұрын

That would be awesome. I would like to see what these guys think of the 950. Lol they way they store id be scRed to let them drive it without extra insurance. I used to ride similarly but it was me on my machine so when it broke I could only get mad at myself. But those guys push them without fear of breaking them. I feel perhaps trying To see what it takes to break one or blow one up lol.

Hi! I have Cforce 450L 2019. and from quad I want more power in high gear when i go uphil. Now in uphil my cforce is loosing power, rpm is the same but speed just drops. I contacted Airdum clutch and Main Street Cycle but no one has responded for last 3 weeks. I would really like to install a kit ( spring and rollers) for primary clutch. Is there some website to order central spring and variomat roller? Can i just re-clock secundary clutch for better performance for drive uphil in high gear? And in what position I need re-clock secondary clutch? Thanks!!

Out of curiosity… how long does it take to change the belt?

I just wanna know if yall are gonna build a kit for the 110s and a tune. For em as well

I have brand new 2022 CFMOTO 1000 atv when going down steep decent engine breaking lets go then its like quad is in neutral and takes off if you touch throttle the slightest it will engage and through you over the bars is there a fix for this

Should i would wait to do a clutch kit on my brand new 2022 600 Touring until the breakin perios is done?

I just realized my manual doesn't tell me what the torque spec is for the clutches, anyone know what they have to be torqued to? CVT system on a 2019 cforce 600.

I have been wanting a quad another one I got 2 Hondas started watching you on the CF Moto this Saturday went and looked at one bought a 600 touring very disappointed on performance until I seen this about clutching and still have hopes for it

@RealTalkPowersports

4 жыл бұрын

What are you not liking about your 600? The spongy feeling of the throttle? What do you think about the ride comfort and suspension quality compared to your hondas

@samuelhostutler9759

4 жыл бұрын

@@RealTalkPowersports has no power sounds like it's going fast but isn'tgranted I've only got about 4 and 1/2 hours on it and I haven't beenand when I put it in gear a few times now it's like it ain't taking the gear and then it will pop in real hard

@samuelhostutler9759

4 жыл бұрын

Yea though the ride and handling and suspension is really and the power steering is such a big difference

@OresteOrta

3 жыл бұрын

Samuel Hostutler does that happen when you try in low gear? If so make sure you go all the forward into the grove in the gear selector than go slightly back into L slot.

Hey Blake, i want this kit but i cant get a response from adam or main street cycle?? I was able to reach adam a couple weeks ago and he suggested just doing the weights and primary spring because i run stock tires and mainly trail ride. I just want to get rid of the lag in the throttle. love the videos man!

@RealTalkPowersports

3 жыл бұрын

If you call Main Street Cycle during their business hours they will answer and get ya hooked up with a kit.

Love the videos I have the same 2020 600 but blue and just dropped it off at Main Street Thursday I’m getting a 2 in lift 14” rims and 28” outback max tires if you don’t mind me asking what did it cost to get the clutching done cause I have a feeling I will need it

@RealTalkPowersports

4 жыл бұрын

They are working on setting up a good price for the DIY clutch kit and a price for if you want it installed at the shop... If it aint too late id encourage you not to go with the outback max tires.. They are Ridiculously heavy compared to the cryptids and other tires

@mattkrus9968

4 жыл бұрын

Real Talk Powersports I wanted the cryptids but they didn’t have any in the size I needed you don’t think it will hurt the 600 do you cause I asked them that at Main Street and they said they weren’t any heavier than the moto havocs they put on the 600 I really appreciate you responding also and love the videos I really wish they had a snorkel kit for the 600 also

@RealTalkPowersports

4 жыл бұрын

@@mattkrus9968 The Outback max are great tires.. they just are a few pounds heavier than the cryptids.. Just make sure you stay in low unless your average speed will be over 15 MPH then stop and put her in high

Blake question for you what is your thoughts on the dr. Pulley sliders and did you consider them before going with Airdam clutches.

@RealTalkPowersports

3 жыл бұрын

Hey man.. I honestly only looked into Airdam

Bought an 08 Arctic Cat 650 a few years ago with the original CVTech Secondary. Was trying to change the belt. When spreading the sheaves the screw bounced off the metal bushing between them and bent the screw and bushing. Is there a point for the bushing and can I replace it with any metal bushing?

Do you know the cluctch position for the 2020 zforce 800ex with 30"tires?

@RealTalkPowersports

3 жыл бұрын

I think B3

I have a question I have a 19 uforce 500 Very jumpy off start in high gear Will this new belt fix my problem Thanks for the input awesome video s man

@RealTalkPowersports

3 жыл бұрын

Donnie a fresh new belt should fix your Jumpy problem... It probably has a glazed spot on the belt were it is slipping and then catching on take off

Will a week primary spring cause belt chatter I have a new belt and secondary I have a trail bloc cvtech primary

How long is the 6mm bolt

I try to remove primary bolt and nut but my impactor won't do it can you let me know what impacter your using IE touque

My 2019 CFmoto Cforce 500s (75hours) was stolen and when it was found it wouldnt drive-found the remnants of the belt in the clutch and a weird tapping noise-cleaned it up and reinstalled with new belt but still makes weird nosie and when I put in gear the engine dies-Im guessing both primary/secondary clutches are shot? I think the thief rode the ATV fast in low gear? Is there anything I need to check? Im scared something internally is bad…

Hi, what is the article number of the belt?

On the primary, you mention the washers and to not throw them away. What do they do? My situation is that something was clanging under warranty, so I took it in to the dealer. They fixed the clanging, but now it has a severe lag in engaging on takeoff, and the compression braking engages way too early. Is it possible that the dealer left those washers out and that's causing this problem? It is now out of warranty.

@RealTalkPowersports

3 жыл бұрын

All the washers are for is proper belt alignment. If it has been messed up since the dealer fixed the other issue then they should qt least take a look at it for you without charging you to see if what they did caused another problem

Question,I have a 2020 cforce 600 I've noticed it jerking on take off could it be a belt or clutch problem

@RealTalkPowersports

4 жыл бұрын

Sounds like a belt issue

i am trying to change out my belt and i remove the 19mm bolt, then the 30mm nut and washer - problem is that the pulley stays stuck on the shaft. I cannot for the life of me pull it out. any ideas why this is? should i apply some heat?

Which clutch setup is better? Airdam or vaunti varrkko?

How's it going Blake? Well I tried to contact main street a while back. They never contacted me back about pricing. Kind of dissapointed.

Hi I just changed my drive belt on my cf moto 520l At idle say in park or neutral both clutches were suppose to not spin. When you give it gas they start to spin but my secondary don't stop spinning Can someone explain to me whats suppose to happen?

Where did u get that standard 6mm bolt. Did it come from clutch cover or in tool kit

@RealTalkPowersports

3 жыл бұрын

That was adams... not sure where he got it or what size.. Main Street Cycle does sell the proper made tool for it

Just a heads up. I installed the clutch kits in a 2021 600 touring and a 2021 800xc yesterday. Both machines needed an 18 , 32 and a 35 mm socket. Not a 30. I don't want anyone to have to go out and buy the proper socket in the middle of the job like I did.

@fairchaseoutdoors4181

3 жыл бұрын

Just did it on my 600 and it took an 18, 30, and 32 mm socket. My uncles 800 was the same.

@mikedemanuel3608

3 жыл бұрын

@@fairchaseoutdoors4181 Interesting. Just my luck I guess.

Does anybody make a big bore kit for the 600?

Is there any chance to 'kill' engine braking on Overland 1000????tnx

I got a 600 I don't like the Is clutch in it to minn rpm to take off what can I do to change that ??

Can I get it for my 2018 kymco 700 ATV hunter series

Can you not use a socket set ?

So reclocked my secondary from B1 to B2 but haven't noticed much of a difference if any. Am I missing something?

@RealTalkPowersports

4 жыл бұрын

B1 to b2 is not much of a difference. You need to try C2 or B3.. both of those are close to the same tension. And you need to order the kit from Main Street Cycle. It will have a stiffer primary spring and different weights for the primary

Come on Blake you're going to tell me the stages or do I wait till next video?

Hey man could you give me the info on that 600. Tires? Wheels? Lift any other mods

My 600 revs way to high in L it hardly moves but revs like crazy how can I fix that ?

My 2012 500a has the cvtec

@ihatelols

2 жыл бұрын

Any problems? I have the same machine 200 miles on.

🤝🙏👍

will the belt come off without taking the clutch off?

@RealTalkPowersports

3 жыл бұрын

Yes it will.. just losen the secondary as far as you can and work it off and around the secondary. Its a pain in the rear but you can do it

Please, my sir, I have the same engine is working and does not move what solution

@RealTalkPowersports

4 жыл бұрын

Does it not go into gear?

Where do I get the bolt that thread in to spread clutch open?

@RealTalkPowersports

2 жыл бұрын

You can order one from Main Street Cycle website

@RealTalkPowersports

2 жыл бұрын

www.mainstreetcycle.com

How much torque does that impact driver have ? I used two types of impacts with 1400 lbs of torque and the bolt ain’t even turning. Anyone have any advice on what I can do next.

@RealTalkPowersports

4 жыл бұрын

Wow.. naw I have been able to use my 1/2" dewalt each time.. just confirming with you that on the primary both bolts are left hand threads and the secondary nut it regular

@BrandoCG

4 жыл бұрын

Real Talk Powersports. Yeah it’s really odd. Because I watch your videos and it looks so easy. Then I go try and it won’t even budge lol. The primary is the one closest to the front right ? And to loosen it you turn it right

@BrandoCG

4 жыл бұрын

So I put my new weights in and spring on my quad today. And now it runs hot. Is this normal or did I do something wrong while putting it in ?

Based on this video, I ordered a 32mm socket for the secondary nut. It turns out that it is actually 36mm! That was a waste of $10!

Can someone help me out ? I just received my primary clutch kit. I’m trying to take the primary off but turning the bolt right. But it ain’t working I tried using a ratchet but the primary keeps spinning so I can’t get it. Please help me. This is on a 2020 cfmoto cforce 500

@RealTalkPowersports

4 жыл бұрын

Your going to have to use a 1/2 inch Impact to get it loose without the primary spinning.

@RealTalkPowersports

4 жыл бұрын

The 500 will come apart just like what you see in this video of the 800 clutch

@BrandoCG

4 жыл бұрын

I’m using the makita 1/2 inch impact gun and it’s not even budging I was so excited to try my new clutch setup I got from Adam but this ain’t working as planed. I literally just got it back from my first service today to.

I've been trying to get ahold of Adam for almost 1 month now ... I am trying to get him to do a clutch kit for my mud build! Please tell him to contact me!

@RealTalkPowersports

4 жыл бұрын

call main street cycle 662.438.6407 they just ordered from Adam the same kit that i have and they ordered a bunch of them to keep in stock so they can ship them to people

@gunslinger5007

4 жыл бұрын

@@RealTalkPowersports is it just a spring and weight kit?

Need engineering to figure out how to seal the clutches from water!

How do I get in touch you you all ??