Greetings from Wisconsin! Thanks for clearing the fog! We all just gotta strive to help and be kind to one another. You continue to be a Beacon for so many. All the grace to you and yours! See ya next time.

@RealTalkPowersports

3 жыл бұрын

I appreciate that!! Thank you so much!

@jerricastalans6673

3 жыл бұрын

💜💜

Well done, I knew you would answer the call on this one. As always... Great Job RTP & MSC! Thank you

@RealTalkPowersports

3 жыл бұрын

Thank you Rob!!! You always make a great impact on me and your always encouraging! Thanks brother

Great video man. This is one video that needed to be out there

@RealTalkPowersports

3 жыл бұрын

💪👍

Man this video is right on time!! Thanks Pastor Blake!!

@RealTalkPowersports

3 жыл бұрын

Thank you Bro! 💪🙌

I just installed a clutch kit on my new 600 and didn't notice the lines you showed us on your video,And of course I didn't know about the lines,It's all new to me and I'm learning as I go,You've been an awesome teacher.Thanks for the videos.

@RealTalkPowersports

3 жыл бұрын

Thanks Clinton.. yours should be just fine. Thanks for watching. I hope all is well

@clintonhendrix4101

3 жыл бұрын

After the clutch kit install I noticed a slight vibration and rattle coming from the clutch.So out of concern I pulled the clutch cover and noticed the lines on the inner and outer sheaves and the ramp plate were not lined up.I lined everything up and put it back together and started her up.No rattling or vibration,I wouldn't have none about lining everything up if it wasn't for your video,Thank's bro.👍👍👍

@RealTalkPowersports

3 жыл бұрын

@@clintonhendrix4101 That is GREAT!!! Im glad everything is fine with it now bro

Great info, thanks Blake keep it up 👍

@RealTalkPowersports

3 жыл бұрын

Thanks Greg!!

Thank you for clearing that up! 🙌🏼

@RealTalkPowersports

3 жыл бұрын

💪 no problem bro

Things were as clear as Mississippi mud...now, at least I can see through the water...lol. Thanks Blake.

@RealTalkPowersports

3 жыл бұрын

Haha thanks Gary.. God bless you and your family

Love it! Thanks for the explanatory video which has answers to questions on my mind 🎉🎉

brilliant info , just what i was looking for and explained perfectly,,

@RealTalkPowersports

2 жыл бұрын

👍💪

Hello, I'm from Brazil, I have a Zforce 1000 sport, congratulations for the video.

Glad you cleared this up

@RealTalkPowersports

3 жыл бұрын

No problem

Thank you for information .👍

Thanks Blake. Great information and agree this was needed. So factory stock will have the marking is that correct.

@RealTalkPowersports

3 жыл бұрын

I cant speak for sure on every model because I've heard of a couple say they don't have any lines on theirs. But I believe that the majority of the units with fully stock from factory clutches are gonna have marks showing that it was a fully balanced complete primary

@tonymic988

3 жыл бұрын

@@RealTalkPowersports Thanks Blake for the additional information. Keep up all the great updates. There is a lot to understand. I hope I don’t screw things up when I get mine. Stay safe.

Great job explaining! Makes sense ! I noticed when I drive my cf moto on dirt roads it fish tails but more so in the front?

@RealTalkPowersports

3 жыл бұрын

Is it more so when the dirt roads contain loose gravel

@MrJeepguy1974

3 жыл бұрын

@@RealTalkPowersports loose dirt and sand

@RealTalkPowersports

3 жыл бұрын

@@MrJeepguy1974 if you still have 9 inch wide tires up front they can tend to wonder and dart from side to side when going thru loose thick terrain.

@MrJeepguy1974

3 жыл бұрын

@@RealTalkPowersports so should I go wider? I was hoping to put spacers 1.5” with a 5x2 wheel offset just to have more stability. What do you think in your opinion?

@jonshro8485

3 жыл бұрын

@@MrJeepguy1974 Wider stance up front will help with stability but won't do much or maybe anything for wandering on gravel, wider tires will help it "float" better in gravel, keeping the machine on top instead of digging in.

Which way should the new one way bearing spin free on the shaft towards the front of the atv or spin backwards to the rear basically clock wise or anti-clockwise mine fell apart and don’t what way now

how do you pull the inner primary sheave off of a 2018 zforce 1000? my buddy was working on replacing my belt and got the 18mm reverse thread bolt seized in the inner sheave.

Hey Blake I got a question for you. I’m loving the look of the cf motos and your channel is a big part of that. I’m trying to get a bike for trail riding but also mud riding. I’m stuck between the outlander 570 XMR and the cforce 600. My question is do you think the 600 has got enough power to make a good mud build? I’ve seen the videos with your 800 mud build and it looked awesome. Just worried about not being able to get through the sloppy stuff. Price difference is about 2k and I would much rather save! Any help would be appreciated man thank you

@RealTalkPowersports

3 жыл бұрын

Well to be honest the power on the 570 XMR is noticeably stronger than the cforce 600. With that being said, you save so so much by going with the cforce 600 and customizing it yourself and making it unique just the way you want it. I had our first 600 on 28 inch system 3 xm310s and a clutch kit and it did great.

@RealTalkPowersports

3 жыл бұрын

But my 800 was hands down the better mud unit

I notice that bearing on the right sheave has a noticeable gap with the sheave, but the one on the left does not. Reclocked my secondary few days back and noticed the gap. Feel a bit worried for the belt lifetime, because it already has some wear marks on the inside due to the cap between bearing and the sheave, right where the edge of the bearing runs. Been doing some research, bearings on the 500 and 1000 does not have the gap, but the 600 does (mine is also a 2022 600). Also it's keeping my secondary under tension, not spinning but just tension, making it hard to shift from gear to gear. Is there any way to change that gap or what's the story/meaning behind that. To me personally it seems that eventually edge of that bearing will ruin my belt.

Does the Airdam clutch kit lower the engine rpm engagement. Just seems to high on the 1 up 600. trying to figure it out and the vids are not really clear on the subject. Thanks for all the great videos and keep them coming!!

@RealTalkPowersports

3 жыл бұрын

It actually raises it a little more on the 600.yes the 600 is louder but it makes more power at that rpm

@pat2843

3 жыл бұрын

@@RealTalkPowersports I thought so. Its the wife's quad and it will be lucky to ever see 40 mph.

I watch all your videos...most more than once. I have a 2020 600 Touring and want a clutch kit to give me better throttle response with stock wheels and tires...what do you suggest?

@RealTalkPowersports

3 жыл бұрын

I've ran the cforce 600 clutch kit from main street cycle with stock tires and loved it. So the kit that they sell specifically for the 600 is what I had and ran in mine. Very happy with it

If the lines aren't lined up what happens.i just changed belts and cleaned my clutches now when I put it in gear it stalls instantly

Do you have a video showing how to change these pulleys? if you have send it there?

Your video is great. I watch all of them. I have CFMOTO CFORCE 1000 model 2021 quad. I installed The Scorpion red power exhaust on it together with K&N filter. It goes maximum 78 mph. Can you hel me with one technical question. How can I get a better response and faster start? Do you have any recommendations or tips? I am interested in making better performances with my quad. I am from Europe, a small country Croatia.

@RealTalkPowersports

3 жыл бұрын

You could reclock your secondary to B3 and get better pull.

@vanjavinceljak9159

3 жыл бұрын

@@RealTalkPowersports thank you for quick response..one more question..do I have to install the Kit on the primary at the same time?

question for ya, i replaced my belt on a cfmoto 400 2021 and right after install it broke again, so i have no idea why it keeps breaking what could be my issue? i took the secondary off and it was a pain trying to get back on, it didn’t slide on easy like my 500 did when i replaced that belt. help me please, i appreciate it

I have the 2020 600 model what is the difference in the cvtech trialbloc

Does the cfmoto 450L 400cc carry a wet clutch?

Where do you actually find the primary sheave? I can’t find it online

If the primary clutch plates are balanced together at the factory, does than imply that replacing only one of the plates can put the assembly out of balance?

@RealTalkPowersports

3 жыл бұрын

It would no longer be a complete balanced unit. But they sell them as individual pieces and send dealers individual balanced pieces. So if thats a potential issue then someone higher up than me needs to come out and clarify why they sell individual pieces if it could potentially cause vibration in the clutch if using individually balanced components of the clutch.

I'd have to take a look at the design of my clutches. My CForce has older clutches that are an actual CFMoto design. it would be cool if I could upgrade them with the CV-Tech clutches but I wouldn't hold my breath. The engines of the newer CForce's probably have a different shaft design.

@RealTalkPowersports

3 жыл бұрын

What year model do ya have

@Slane583

3 жыл бұрын

@@RealTalkPowersports It's a 2014. From what I can tell it was their model they sold for a while over in Europe before coming to the states. It was known as the X5 over there I believe. It's a nice bike but compared to their newer machines the fit & finish is a bit crude in places and is much less user-friendly as far as maintenance goes compared to the new machines. Lots of bolts, lots of push-pins holding panels on, and takes a screw on oil filter. Though I see they still used the same 4x4/dif-lock setup as mine on their 2020 models. So I wonder if their newer dif-lock controls would work as a replacement. :)

@RealTalkPowersports

3 жыл бұрын

@@Slane583 ahh yes a good bit has changed for cfmoto since the 2014 models.. they are improving year after year.. but ive only kept up with them since the 2018 models

@Slane583

3 жыл бұрын

@@RealTalkPowersports Funny enough, when my friend bought it new he went for it to get his credit up. It was the cheapest thing he could get. Because I only knew about them through YT videos from European riders. I told him about them and then he started looking up videos for them. Then the local Yamaha dealer started selling them and here we are. He went from the CF Moto to a Polaris Sportsman 570 and then I acquired it from him. It's slowly been getting some tlc. I need to order a fuel pump to get it ready for the summer. And possibly some new tires, the stock ones are starting to get down on the tread. I'd love to do payments on an 800 but sadly I'm already paying on a truck lease. The truck gets me back and forth to work so that's a bit more important. :)

@RealTalkPowersports

3 жыл бұрын

@@Slane583 no doubt man!! Maybe it will workout and you can get ya a new one soon! But in the meantime I hope you can have a great time in the 2014 one

What is stock setup for secondary cf600Touring?

Do you have the cv tech parts number for à cforce 1000???primary clutch

2021 cforce 500... no marks on the ramp plate. Dont remember seeing any marks on the unit when I pulled it either. Hmm... maybe needs another look? Nothing weird going on, hate pulling that cover, it's a PITA.

@RealTalkPowersports

3 жыл бұрын

Yea it can be a pain haha. Its no biggie.. just next time you have a little free time; take the cover off and give it a look over. As long as its not doing any abnormal vibrations it should be fine to ride till u can check it out

@andrewnichols7410

3 жыл бұрын

I hope so!! I ride almost every day, and typically ride it like I stole it! Great video series by the way, looking forward to the next. Thanks again.

From drilled part it seems outer and inner are not balanced. Only balancing is done on outer inner part - it has drill holes. I think when changing parts need to balance all unit and drill inner of outer part where drill holes are seen. But then, weigths do move unbalanced and who does offer balancing service for these? I know some balance long shafts on mowers and drums on combines without taking off from machine. They come to machine and do it in place. Have not seen it done and haven't more info. Probably any electric motor balancing company will do these cvt as long as you provide right fit shaft to put cvt on. Maybe cut old crankshaft end?

@RealTalkPowersports

3 жыл бұрын

I dont believe all that would be that necessary. Out of all the 4x4 racing teams and people that mud race and GNCC race with CVT driven machines, they do a lot of modifications to clutches without perfectly balancing them with each modification. Things would have to get way out of wack and out of balance to cause enough vibration to actually cause some extra wear over time.

@artur8403

3 жыл бұрын

@@RealTalkPowersports indeed. Those weights dont move perfectly in balance too

I have no idea about any of this. I have a CV Tech clutch and it sound like something is loose inside? Is that Nirmal?

I am having a hell of a time trying to find information about a cv tech trail bloc primary clutch that fits a 2009 club car XRT950 with a 14 hp b and s vanguard engine with a tapered shaft. I can’t find a replacement clutch information that will interchange that shows compatibility with the newer brands, can anyone out there help me?

At 19.5 hours. Got a wierd rattle noise coming from somewhere. Will installing a clutch kit effect warranty work if the rattle is not clutch related?

@RealTalkPowersports

3 жыл бұрын

That would be something to ask your local dealer thats doing warranty work. But if the issue that needs warranty work has nothing to do with a particular modification then it should not void warranty

I put new spring and weights in my cfmoto 2020 600s. Should I pull the covers off and see if I have the grooves or should I be ok it runs fine.

@RealTalkPowersports

3 жыл бұрын

Robin honestly yours should be fine. We are talking very little vibration COULD/MIGHT occur over time in most cases if both halves had lines and were not lined back up just right... so my personal suggestion (this is not from CFMOTO or any Shop) Just me personally if everything feels fine ride it.. but if you start to notice any abnormal viabration or extra noise from the CVT area, (dont panic) just go ahead and take the cover off and do some inspecting and take that time to just blow out the belt dust and even inspect your belt and if you have the lines on both halves then go ahead and line them up and button everything back up and you will be good to go.

@robinbreeze270

3 жыл бұрын

So no need for me to take covers off again to check if they have grooves or should I check? Sorry I was confused by your reply? So No need for me to check Correct? I have had the kit in for a few weeks now. Seems like less vibration to me..

@RealTalkPowersports

3 жыл бұрын

@@robinbreeze270 i was saying not to worry about it if everything sounds and feels good on it. But if you are concerned about it and have the time and enjoy working on stuff then it would not hurt to just go ahead and take the cover off and check it.

@robinbreeze270

3 жыл бұрын

@@RealTalkPowersports Thank you for such a fast response. I will leave it as is. I am very happy with it. One of the best things to do for a couple hundred bucks. Love your channel and as always you make sense and great info. Stay safe and God bless you and yours.

@RealTalkPowersports

3 жыл бұрын

💪👍 God bless yall!!

👍👍👍

@RealTalkPowersports

3 жыл бұрын

Thanks bros

I changed the belt in my 2020 zforce 800 Ex and now have a rattle noise at idle from clutch. Took back apart and everything is tight. Nothings loose on primary or secondary.

@RealTalkPowersports

3 жыл бұрын

Did you take the ramp plate off and make sure on of the weights hasnt come out.? IF anyone sees this comment and might have a idea of what issue Chad could be dealing with here please help.

@chadellison5875

3 жыл бұрын

Your talking about the ramp plate the rollers set in that the cam plate covers with the yellow bushings?

@RealTalkPowersports

3 жыл бұрын

Im just trying to think of what could be your issue.. Did you remove your primary or secondary when you changed your belt?

@chadellison5875

3 жыл бұрын

@@RealTalkPowersports I had to loosen the secondary to let it slide out some and I removed the primary ramp plate and Siskin plate to get the belt on I didn’t remove that back of the primary. The plate that goes over the rollers also has splines cut out in it to go over the splines shaft and it just barely goes over the splines but enough that the splines are all the way through the plate.

@chadellison5875

3 жыл бұрын

Not Siskin plate but cushion plate 🤦‍♂️

What si the website for order ?

so what clutches kit should I get for the zforce 950? on do I need to

@RealTalkPowersports

3 жыл бұрын

What tires are you running

@RealTalkPowersports

3 жыл бұрын

I ran a clutch kit in mine with my 32 inch cryptids.. but those tires were heavy

@RealTalkPowersports

3 жыл бұрын

Joel and David kept their clutches stock and ran 32 inch Carnivores.

@08breezy08

3 жыл бұрын

@@RealTalkPowersports stock

@RealTalkPowersports

3 жыл бұрын

@@08breezy08 i would leave the clutches alone then. At least until you put some heavier tires on it.

Ciao mi mandi i link voglio comprare anchio ???

you going to do that ssr 170 vid soon?

@RealTalkPowersports

3 жыл бұрын

We haven't been able to due to weather and other circumstances. But I havent forgot about it.

@emfelling8384

3 жыл бұрын

@@RealTalkPowersports ok sounds good it would be cool if you got a banshee someday!

@RealTalkPowersports

3 жыл бұрын

@@emfelling8384 ive always wanted one.. I miss riding sport quads.. ive had a 450r and a 400ex

@emfelling8384

3 жыл бұрын

@@RealTalkPowersports oh nice did you like the 400ex i was thinking of getting one

@RealTalkPowersports

3 жыл бұрын

@@emfelling8384 Yes it was my all time favorite sport quad to play on.. its not the fastest but it was the best all around sport quad in my opinion

ya im convenced cv tech isnt that great of clutch since first thing everyone has to do is upgrade them n seem to be alot of mainance compaired to japense madels that go yrs with no problems bigger tires or not

lol, never cared to line up anything ever, and everything works fine… 🤷‍♂️

O and comment for the algorithm!

@RealTalkPowersports

3 жыл бұрын

Thanks Ron!

Almost sounds like you're cleaning up a mess you got called on! In politics it's called "walking back" a statement, or taking something out of context. So, on a matched set the lines matter, right? Thanks.

@RealTalkPowersports

3 жыл бұрын

If your particular unit has lines on the sheaves, yes it is definitely recommended to line them up if its all stock original components.

@atvseatexchange2176

3 жыл бұрын

@@RealTalkPowersports Thank you. I'm at a dealer 6 days per week and the confusion didn't make any sense.

@RealTalkPowersports

3 жыл бұрын

@@atvseatexchange2176 Yea i agree.