you can find all of your cfmoto parts here www.rngperformance.net clutch kit rngperformance.net/shop-parts-accessories/ols/products/cfmoto-cforce-1000-stage-1-clutch-kit OEM Belt this is the only belt we use and trust rngperformance.net/shop-parts-accessories/ols/products/cfmoto-oem-belt Spreader tool rngperformance.net/shop-parts-accessories/ols/products/cfmoto-oem-secondary-spreader-tool

Man if you wasnt 5 hours away. Rather you.fix my toys than anyone else. Top notch knowledge

@R.N.GPerformance

11 ай бұрын

Thank you brother. Appreciate that.

@j.a.manzke-ov2ki

10 ай бұрын

I have thought the same thing in the past!

I just found your channel and I like it I will follow you cuz you save some of us money with your videos 👍🏼

Just ordered your primary kit this week! Thank you!!

@R.N.GPerformance

2 ай бұрын

Your very welcome 🙏 thank you 😊

Great instructional video Steve!

@R.N.GPerformance

11 ай бұрын

Thank you 🙏

Excellent thank you!dave🇬🇧🇬🇧

Thanks for sharing this info!

@R.N.GPerformance

8 ай бұрын

Your welcome 🙏

Really cool!

@R.N.GPerformance

11 ай бұрын

Thank you 🙏

Nice job man

@R.N.GPerformance

10 ай бұрын

Thank you 🙏

Great videos! I just got a 23 cforce 800 xc. I wanted to go stage 1 clutch kit. What do you recommend/sell that works with mine? Also, do all cfmoto ATVs not stay in "gear' when showing to a stop? I've driven other name brand automatic ATVs and they all stayed in gear or engine break to a full stop. My cfmoto weather low or high will disengage below 3 mph. I live in a mountain range area so I do a lot of rock climbing and decent. I would like to be able to use say low gear and it stay in gear/clutch engaged while descending. Or I'll eat through brakes.. thanks

@R.N.GPerformance

10 ай бұрын

Our primary clutch kit will help that. It’s the way the clutch is tuned

How to solve the problem with the brake pads and disc on the new cf 1000. It squeals a lot while driving. I drove adly for 10 years and they squealed when they were dirty.

If the quad takes off with a slight shake, does this mean that the belt is deformed? anyway, i better take the plastic cover off and check it tomorrow morning ..

Just started watching your Videos as I just bought 2023 600 touring. Absolutely loved machine breaking in properly, went for a trail ride going down a fairly long hill just loving the engine breaking then just started grinding and and sprang forward then fully grabed gears again and flipped us forward, then machine end over end many times . Have you hears of these 600s popping out of low gear like that? I dont believe it was clutch or bearing as it from factory had to wiggle sometimes to stick into low, and popped out to load on my trailer once before. Now I have a 1 month old machine with 100km on it that havent contacted dealer yet as I think they will just say something like it was swamped or something witch it wasnt.

@R.N.GPerformance

8 ай бұрын

Yes. It would need a shifter cable adjustment that will fix that and keep that from happening.

@jamietoes895

8 ай бұрын

Thank you so much, I think just need to talk to dealer see what they say, machine is just a boat anchor now, 😢

Hi Red. I have a bone stock 2022 600T. I hate the high clutch engagement. I plow, tow, and run the bike in slow, steep trails. Feel like I have to rev the piss out of my machine all the time just to get it to move. I'm looking at the clutch kits that MSC sells. What do you think? Stage 1, 2 or 3? Or do you sell something comparable?

@R.N.GPerformance

8 ай бұрын

Hello there. We definitely do. Our kits are very smooth. We personally don’t do stages. We build custom kits for the riders needs. You can check them out at www.rngperformance.net or give us a call we can get you set up with a custom kit. And make your 600 be butter smooth and not rev so high.

Just found your site as lm looking at the CF Moto brand. I had a 93 Yamaha Kodiac I bought new had for twenty years then bought a 2012 Polaris 400ho new that I’m thinking of selling and getting another quad. I’m looking at the CForce 600. I use it mostly around my property for hauling brush and dragging limbs and small trees. Also use it on trails up in the mountains for getting into my mining claims. I don’t abuse my equipment but I do use it and always maintain them. Wondering if can expect to get 10 to 20 years out one.

@R.N.GPerformance

4 ай бұрын

Yes sir. They are very good machines. I actually personally seen one with 14K miles on it all stock except new belts and tires. That was with our clutch kit as well.

@weshawkins7165

4 ай бұрын

@@R.N.GPerformance I just watched your clutch kit install video and would probably get one and install it if I got the machine.

Do you know why the bearing won't go back on all the way?

Is that a cv teck trail block clutch,I just got one for my maverik 1000 xmr. Now I'm considering the same brand for my secondary

@R.N.GPerformance

11 ай бұрын

Yes it is. CFMOTO comes stock with them.

Evening. Working on a 2018 cf moto I purchased a clutch holding tool vice grip type tried too get the nut lose. Any easier way to break it loose.

@R.N.GPerformance

10 ай бұрын

Impact

Have you ever seen a metal bushing between the two secondary sheaves? My bent when opening the secondary for a belt change. Haven’t found anyone address the bushing. Got an 08 Arctic Cat 650.

So is the clutch kit providing any engine braking? Where I ride there are some steep trails and I do like the engine braking going down hill to save brakes

@R.N.GPerformance

10 ай бұрын

Yes it does

Hey Steve what makes my 950 make a clunking noise when I put it in gear and I go to take off. Is that common

@R.N.GPerformance

10 ай бұрын

I would have to hear the noise. Send me a video on Facebook look up my page RNG

I find mine is grabbing, since new, I was told reclocking takes that away and makes it a smooth start in high gear. I find low gear it pulls away smooth but not high gear. Does reclocking work?

@R.N.GPerformance

11 ай бұрын

No. Needs our primary clutch kit.

@OpenAirAdventure

11 ай бұрын

@@R.N.GPerformance 10 4

Dostum cok iyi video olmuş kayış icin hangi önerirsiniz

So I just took my cover off on my CF Moto 600 and once you put it in gear and then put it back into neutral the big secondary clutch continues to spin would that be the bearing

@R.N.GPerformance

10 ай бұрын

Yes it would

@vinemont2009

10 ай бұрын

@@R.N.GPerformance And I could just get those two bearings off your website correct

Hey man quick question by reverse hand threads you mean left to loosen right ?

@natenance7806

4 ай бұрын

Lefty tighty righty loosey lol

@useryggfdcc

Ай бұрын

Counter clockwise to tighten, clockwise to loosen the nut.

I have a 2019 CF moto C force 500 HO if I delete the one way bearing won’t it stop working?

@R.N.GPerformance

10 ай бұрын

No

aww yes cv tech clutches so great ya have to update them with a clutch kit the more i watch your channell n real talk power sports not sure i want a cfmoto if ya gotta upgrade everything plus they keep going up in price every yr soon they wont be worth buying

@R.N.GPerformance

7 ай бұрын

They aren’t bad. But honestly I clutch everything I buy. Even our Honda Navi lol

@R.N.GPerformance I have a cf moto 800xc and I can’t get my bike to move I put it in high reverse low nothing works when I apply throttle I’m not sure what to do with it if it needs full new clutch assembly or if it’s a different issue please get back to me if you can thanks!!!

@ryandavis5131

2 ай бұрын

@R.N.G Performance

@R.N.GPerformance

2 ай бұрын

I would pull the primary apart and see what’s going on in there.

@ryandavis5131

2 ай бұрын

@@R.N.GPerformance I’ve pulled both clutches off put a new belt on and it still won’t move when I put it in gear and push it the secondary moves I’m not sure if that helps diagnose the problem but the machine only has 50 hours on it and the primary spins as it should when I fire it up just not familiar with these kinds of things I’m handy but your videos have helped don’t know where to go from here my buddy said it sounds like the wet clutch needs to be replaced?

Hey bro, Do you sell a power flip for a 23 UForce XL1000 ? I can’t find one anywhere

@R.N.GPerformance

10 ай бұрын

I don’t my friend I’m sorry.

@chadrayl9648

10 ай бұрын

What do you recommend I do for upgrades first on this unit?

HI . I only met you now. Give me some advice I would like to buy a CF moto cforce 100 what do you think? In Italy he is very snubbed. Thank you

@R.N.GPerformance

8 ай бұрын

I would buy one.

@emanuelepetrini3010

8 ай бұрын

@@R.N.GPerformance would you buy it? All right? in Italy not much is known

How do you hold the primary to torgue it to specs?

@R.N.GPerformance

5 ай бұрын

We sell a holding tool on our website www.rngperformance.net

Ciao . Ti ho conosciuto solo ora . Dammi un consiglio vorrei acquistare un CF moto cforce 100 che ne pensi? In Italia viene molto snobbato. Grazie

@R.N.GPerformance

8 ай бұрын

English?

@emanuelepetrini3010

8 ай бұрын

@@R.N.GPerformance no

I just got back from WV riding with the new engine. I did get the long block and it ran good EXCEPT for the clutch. Smoked a brand new belt and it didn't seem to engage right while rock crawling. I didn't have time to take the cover off and check to see it came with an OEM clutch and mine didn't make it or mine just sucked that bad. I need a clutch to engage power immediately and not the jerky ass crap I had and not good engagement so it smoked the belt. What should I do?

@R.N.GPerformance

10 ай бұрын

What machine do you have. Give us a call please. 3308060728

@sxsoutcast7651

10 ай бұрын

​@@R.N.GPerformanceis it too late to call big red?

What the drawback for removing the 1 way bearing?

@R.N.GPerformance

11 ай бұрын

Nothing really.

@joshbarnier5829

11 ай бұрын

​@R.N.GPerformance doesn't deleting it get rid of the engine braking? My wife loves that fearure

@A11ium

11 ай бұрын

went to the comments just to say that too@@joshbarnier5829 Engine braking is good to have.

Why are the weights changed out?

@R.N.GPerformance

6 ай бұрын

?

Does RNG ship to Canada??

@R.N.GPerformance

11 ай бұрын

We sure do brother.

@lucabrasi4728

11 ай бұрын

Will I have to pay USD?? Or does your site already switch the currency to CAD

@mattneily5507

10 ай бұрын

​@@lucabrasi4728mastercard/visa will do it automatically upon payment typically. You will pay in American, but when you look on your statement it will be converted to cdn equivalent.

What causes this to happen

@R.N.GPerformance

11 ай бұрын

Mainly water. But other then that just normal maintenance