I can't describe my happiness at seeing a new plasmo upload

@rafindraichwan8225

3 жыл бұрын

Me too ಥ‿ಥ

@nickcarry3326

3 жыл бұрын

Same

@ericbadia5

3 жыл бұрын

Me toooo

@darson100

3 жыл бұрын

You and me both brother

@clemens.29

3 жыл бұрын

My happiness goes 📈📈📈📈

First of all, stellar work! I was in the army on a different mod of the centurion tank ( Puma- an army engineer carrier, without the turret) and it looks and feels so real! I feel silly to give some remarks for such a perfect rendering but i think it is nice for some more info on this tank- The track tension: even though it looks so much better, and it is actually covered by the armoured plates, the tracks need to be completely stretched out, so the tank won’t derail in the terrain. Golan heights is basalt and in the sinai desert it is limestone.... this things derail all the time and are a nightmare to fix on the field. The”v” mark is actually in a wrong placing: they need to go near the front of the plates. In firing positions you actually see only the front of the tank, and the marking helps identify what company it is: v in 0 degrees is A company, in 90 is B, and so on. Last, the number in the side is upside down. The letter is not an M, but rather a letter ״shin”, for the word “Shirion”, that means Armor . Ah, and these things are buckets of grease. The tracks have a hundred plus grease nipples, that have to be filled weekly, and they make yellow stains pretty much everywhere... But there is nothing like going on one of these in full throttle, these things fly! You are an artist! Cant see what you do next!

@darkwood777

3 жыл бұрын

Thanks for these helpful comments!

@johnmclean6498

3 жыл бұрын

Beautifully completed model - a true artist. Agree with the last...the plate number on the front ends in 606 - so that on the side armor would make sense, rather than 909. Good pick up.

@ID-8491

3 жыл бұрын

Kol ha kavod :)

@majorkriger

3 жыл бұрын

David great work, as usual! Ricardo, Thank you for sharing your experience!!

@BrasherFox

3 жыл бұрын

I was a Gunner/Driver of the Centurion Mk XII-XIII and your quite correct re track tension. We set it at about 1 - 1.5" play at the top, vertually no sag on the track.

I know its not your style but i think that Napoleonic battle diorama made by you will be the best thing ever.

@MartasZLA

3 жыл бұрын

Oh hell yeah!

@matthewkennedy6506

3 жыл бұрын

That would be nice

A few months ago I wasn’t interested in Tanks. Now after seeing Plasmo building Tanks I kinda started finding the sweet spot to this beautiful vehicle ❤️☺️

@francogonzalez1985

3 жыл бұрын

play war thunder

@krispy5842

2 жыл бұрын

@@francogonzalez1985 XD

So realistic, just amazing!

New Year’s resolution: getting more new Plasmo videos on my feed.

@flack2998

3 жыл бұрын

lol

I live 10 minutes from Yad Lashiryon which is IDF's official armored vehicle museum. (It is also one of the largest in the world) I must say you did a remarkable job! Very true to life. My Father in law was serving in a model very similar to this one before Yom Kippur war. He past away two years ago, but I managed to get him to the museum where he described to our family how they exercised the deployment of the "Gesher Glilim" which was a bridge based on empty air drums where they drive and dropped it to the Suez canal using modified Shot Kal tanks. Eventually he didn't enter the war due to being injured from an Syrian operation couple days before the war. For me, by the time I went to the IDF those where already retired. But the paint job resembles Merkava tanks.

The best looking Centurion I have ever seen . I love building IDF armour -lots of add-on detail ! prefer this without the side skirts , then you can see all that wonderful track detail ! Wales UK.

@Stormcloakvictory

2 жыл бұрын

Definitely agree, those days the IDF made every tank look amazing, the Sherman M50s and M51s are by far the best looking Shermans and the Tiran 5 is by far the best looking T-55 (T-55 with the british 105mm btw) And basically my favourite tank period, a soviet tank with british armament and centurion turret boxes/racks and Israeli paint scheme and markings. Imagine how IDF Leopard A1's would've looked 🤤

@henm3000

6 ай бұрын

Hi Guys. I am israeli. and if u like so much Istaeli armory u can c them in real life. google for Latrun, there located the israeli armor museum, all IDF armory in past ans present are there, some of them u can walk on the top of the tank@@Stormcloakvictory en.wikipedia.org/wiki/Yad_La-Shiryon

Amazing work on this Cent mate. I was in Australian Cents for about three years before we got the Leopard. They are truly a Tankies tank, loud, dirty and dangerous and soooo much hard work. But we loved them. Mk5s with the 20 pounder, 30 and 50 cal MGs and the Meteor petrol engine. Ahhh the memories so much fun. I'm currently attempting a Cent in Vietnam diorama build. My first build for decades and my first ever diorama, wish me luck and keep your powder dry.

my granpa served in one of these. i have seen the shot kal irl and OMG the realism.......

Those streaks on the side..... dude you really are an artist.

Very well done, thanks for sharing!!!! 👌👌👌👌👌

"I make a ton of mistakes and hide them" *I'm in*

OMG my problem of waking up at 3am finally has a up side!

I'm incredibly impressed. I didn't know it was possible to produce such a realistic effect.

This model is so accurate it brought back many memories...

@ShannonSouthAfrica

3 жыл бұрын

Am Yisrael Chai

"How many machineguns do we need on this tank?" "Yes"

@IcePhoenix_yt

3 жыл бұрын

Pretty much

@paulrichtmyre7698

3 жыл бұрын

4 machine guns with the coax mounted beside the main gun

@ScottKenny1978

3 жыл бұрын

Have you seen what they did on the Merkava? .50 over the main gun, another .50 on the commanders hatch, FN MAG on the loaders hatch, and usually a Mk19 (or whatever the Israelis are using) on the gunners hatch. I don't remember if there's a coaxial MG in addition to the .50!

@Hatzornik1

3 жыл бұрын

3

@joh2805

3 жыл бұрын

@@ScottKenny1978 most common (as seen on free media)- internal coaxial MAG, external coaxial .50 cal, and 2 MAGs for commander and loader next to their hatches.

First of all amazing models and second of all who the hell dislikes these videos?

@SerenadeURA

3 жыл бұрын

People without the talent to do the same, but the jealousy to do *something*

@siegfried2k4

3 жыл бұрын

This is super niche content right? I don’t know how this got many views and likes

Sir, I take my hat off to you for your: Patience, skills and dedication to making such amazing models. I have viewed many others on U tube but none come anywhere near to your amazing talents. You should be proud of what you do and its a pleasure to say so. I'm 69 y/o and would never attempt to do what you do, 20 years ago yeas, but I can sit back here and watch an expert do the amazing as you do in all your builds. Many thanks and love what you do, A true Artisan to say the least. I

One of the best things about building plastic models is the photography/video taking sessions after finish building. The ones for your builds are always top tier quality, always looking forward to more.

David's video production is becoming top-notch...The final presentation is beautiful - not to mention his art work. Just WOW...

Dunno why, I like the fact you did not remove the sound of sanding and cutting stuff. Great job as usual

Parece un tanque real!! Fantastico

Just bought this kit after eyeing it for over a year. I'm overwhelmed, defiantly one to take my time on.

Nice results!

I haven't painted a model since I was a boy and BOY wow this is absolutely stunning paint work! thanks for sharing

Fantastic skills on show. This channel has inspired me to take modelling up again (it's been 30 yrs) and loving the journey. Surprising what has changed and what hasn't.

Its always a pleasure to watch how to tackle each model. Inspires me to go the extra mile on my kits to have more detail

Отличная работа!

Очень классно получилось. Обожаю, когда модельки, в нормальном масштабе, делают как настоящие. +++

Hi, I just wanted to thank you for your amazing videos. I've been modelling occasionally since I was a child but today after a few months back at it, I invested in my first proper airbrush and compressor. Your channel has massively inspired me to get back into it full time and really improve my skills.

That wonderful feeling when you unexpectedly find a new Plasmo video

Hi Plasmo! I am huge your fun! You are one of some modellers Who inspired me making my own videos. Love your work and ideas! Cheers

Amazing work, as always. Everything you do seems like museum-quality, or damn close to it.

Your attention to detail is absolutely amazing, so realistic

I have watched alot of your model building videos, and am always amazed at how they turn out. So well done, keep up your great work.

Я уже переживал, что что то случилось, так давно не было видео. Не зря ждал, видео отличное.

从来没看见有华人的留言 非常感谢你的视频 对我帮助真的很大 👍♥

I'm glad you did a 1/35th scale kit! You knocked it out of the park with this build David 🙌💪💪👏👏👏

You're a modelling genius, Plasmo! Thank you so much for the pleasure and guidance you have given me. Your videos have entertained me so much during the Pandemic. I am about to build the Airfix Mk1 Hurricane in 1.72 and will be trying to follow your incredible path.

"We want nice models" - this is the way!

A surprise to be sure, but a welcome one.

I love these videos, this guy is an absolute beast. His attention to detail is beyond mind blowing. Keep it up PLASMO!

Beautifully built, superbly painted and weathered, finished off with amazing photography. Another master-class.👍👌😁

Очень люблю Ваш канал! Спасибо.

I’m going to do a plane plasmo got me covered for wethering

Dude, you'r a scale modeling god! This level of realism is just insane!

This is again a very well done video by @PLASMO is not really need to mention more. Here you get a very good suggestion how a painting and aging of an IDF tank can look like. @PLASMO shows very well how you can achieve very good results with the color mudulation and at the beginning is shown very well the trimming of the kit parts and the handling of the different materials of the kit parts. It is again a very good build report video! ;).

Well, time to take $60 out of my bank account😅

The worst part of 1/35th scale is having to assemble gazillion parts, and lt feels like lt takes forever....but lt is also the best part once you get the hang of it 😂

This may be the best model I have ever seen built. This guy is a master. Very Nice!

Once again David sets the bar even higher. But does it in a very inspiring way. I always get excited when I see a new Plasmo video posted.

Спасибо за видео, как всегда великолепно.

@santaklaus2489

3 жыл бұрын

Посмотри одного японца . Он самый крутой чувак по моему мнению, правда не много Видео у него но он круче Плазмо и всех других. Ebroin's Miniatures

@konstantindunaev

3 жыл бұрын

@@santaklaus2489 нет

@santaklaus2489

3 жыл бұрын

@@konstantindunaev нет? Почему?

@konstantindunaev

3 жыл бұрын

@@santaklaus2489 а чем так крут этот японец ?

@santaklaus2489

3 жыл бұрын

@@konstantindunaev Он делает всё на столько качественно и интересно смотреть от начала до конца. Видно что он перфекционист и переделывает всё что только можно. Посмотри как он корабль строит. Одну палубу 1 год. Качество зашкаливает. Плазма рядом не стоял . Или как он делает и красит скульптурки. Он делает много своими руками, а другие всё покупают.

Looks great, im new to modelling so still learning, for the highlights did you say use 1 part paint to 4 parts thinners?

@xTheZapper

3 жыл бұрын

It varies based on what paint you're using, the type/make of thinner, airbrush nozzle size, air pressure and even local temperature and humidity conditions. I generally use a much lower pressure than other people, as a result I tend to need to thin the paint more. That's just how I've got best results myself. You'll just have to experiment a lot.

@Simongtt

3 жыл бұрын

@@xTheZapper Thanks Gary, ive bought mainly Ammo paints at the moment and their grime products, as well as their pigments. I live in the UK so its cold and erm wet!

@xTheZapper

3 жыл бұрын

@@Simongtt I'm also in the UK, I'm not sure if it's better or worse than living somewhere constantly hot as our conditions can vary quite a lot based on the outside temperature and heating going on and off inside. If your Ammo paints are the water based acrylic ones like Vallejo, I didn't like them. I started with that type and couldn't get on with them, I sold them all and bought Tamiya. But my failure could be down to all sorts of variables - paint mixture too thick, too thin, air pressure too high/low, spraying too close or far away. But I also found they suffered a lot from tip dry and I had to constantly wipe the needle tip. After using a Tamiya paint a lot of those problems seemed to go away, the Tamiya paints are alcohol based so I attributed less tip dry to a stronger solvent keeping the paint a liquid, the alcohol base also means the paint dries faster, which is not always a good thing, they're not great for brush painting. You might have noticed Plasmo uses water based paints for brushing and alcohol/lacquer paint for spraying. Another problem I had with water based acrylic was that it didn't adhere as well to the plastic, I often had paint peel off with masking tape. The solvent based paints tend to bond a lot stronger to the plastic. I've since take to using a solvent based primer too, Alclad or Mr.Finishing Surfacer 1500, in black, I always prime in black. I also always wear gloves now as I think I was getting greasy handprints all over the plastic which didn't help.

@craigray3211

3 жыл бұрын

@@Simongtt i can vouch for that weather report.🥶lol

I get more enjoyment from watching your videos than I get from building my own kits.

Once again blown away by your work. I never had an interest in building tanks, but now i do. Keep up the good work !

That is one beautiful beast, well done! The Swedish army had Centurion tanks so they are close to my heart. Would you consider making a Brittish Berlin city camo Centurion, the camo pattern looks awesome .

@simonmonk7266

2 жыл бұрын

There is a Swedish centurion kit on the market and for the love if God I can't remember the manufacturer .

@DEATH-THE-GOAT

2 жыл бұрын

@@simonmonk7266 Google is my "friend". I will look for it. Thanks 😊👍

@simonmonk7266

2 жыл бұрын

@@DEATH-THE-GOAT just looked it up by " amusing hobby".

@DEATH-THE-GOAT

2 жыл бұрын

@@simonmonk7266 thanks 👍

@simonmonk7266

2 жыл бұрын

@@DEATH-THE-GOAT that's ok. There's one on eBay at the moment. Quite expensive though.

After all this time!

@larodelahozpreziuso3539

3 жыл бұрын

The return of the King

@henryoshea4951

3 жыл бұрын

@@larodelahozpreziuso3539 Facts

Holy smokes just taking the packs out the box is intimidating. Thank goodness for Plasmo! Best way to enjoy a morning coffee

Some day i will definitely finish my T-90MS from "Zvezda" in 1/35. Definitely. After solving problem with motors, which starts in the moment of remote control plate start. Combining tank models with RC is interesting. After this video i want "Centurion" or "Comet", but i cant without finishing T-90.

Still smashing it out of the park, irrespective of whether it’s aviation, or armour! Definitely the finest modelling vids out there.....and this one is one of the best! 👍🏻👍🏻

My god what a death machine. Everything so well thought out. All the added armour and guns and counters. Beautiful model too.

Great job David, as always!! Hope you had a wonderful Christmas and new year’s. Glad to see you back in action.

I used to only build stock models, too scared to ruin them with modifications. Now I'm starting to experiment with modifying my models, to really make them unique. Also I'm now switching from specialist weathering products to oils. All because of your (and Night shift's) videos and I'm massively thankful for that.

Wow very nice, I can't believe this is your first 1/35 scale tank, hopefully you will build more.

@justincase6769

3 жыл бұрын

It's not his first 1/35 scale tank, I think he did a Tiger 1 and a Panzer 1

@johntreloar8203

3 жыл бұрын

@@justincase6769 Yes he did a Tiger 1 seen that after I commented and was to lazy to change my comment.

It's always great to see a new PLASMO video!

great work as always! Amazing quality and realistic results. I watch every video with pleasure! Thank you and good luck!

Just watch this video again and I'm still getting great tips , thank you Plasmo. I can't like it twice but I can comment twice - brilliant video, especially from sprue to finished weathering.

Happy day indeed, 25 min lesson from plasmo! Excellent!

Just gorgeous modelling and painting. As someone said above - incredibly realistic with the final result.

You have done the centurion justice. Fantastic build.

l'attente fu longue mais le résultat en valait la peine!! Ce kit est superbe avec beaucoup de détails que tu a mis en valeur David, ce Centurion mérite un diorama!

Bloody hell that is one sweet build! I hope I can build a model just as realistic as you do on every single on of your vids man! Damn!

There are parts where I can honestly not tell if I am looking at a model or the real thing. Amazing.

Feels like watching old top gear with the intro. That was a great flashback. Also great work Sir..

Another great build, David! Even more stunning in 1/35-scale! Looking forward to seeing more in this scale 👍

Finally I'm gonna get a dose of dopamine and serotonin. thanks PLASMO

Another masterpiece, and you make it look so easy. You sir are a true artist.

you make it look so simple... so subtle yet so beautiful

It's a pleasure seeing such a beautiful model, should be placed in a diorama with some figures and the shading is top notch!

One of the best models you made, seriously.

Even watching this over and over again its stil so impressive to see you make this, am so jealous and wish i was even 10% as good as you, so much respect off how you make it plastic look so real. In time off corona now (23-11 2021) i love watching all off your builds again and love every minute off it.

I can’t decide if your builds inspire me to build more or just quit…lol Amazing build!

@andrewharper7333

3 жыл бұрын

Had to laugh those were my thoughts as well my kits have been getting better all the time then I see your build and I realised I have a lot to learn

This makes the GW Leman Russ tanks I've been making recently seem like a walk in the park! Great work as always.

@Ray-yv7kn

3 жыл бұрын

You know, I think Plasmo has a 40K model coming up.

I love these modelling sounds in the background. Please keep them in future videos

What amazing build! An autethentic arte pice! Love the new video format hearing the tools, like airbrush...etc

I'd love to see you and nightshift build the same tank. You two are my favorite model channels. In my opinion you're equally great at what you do but you have a different style. I'd love to see your different approaches to the same model.

Welcome back and a Happy New Year! Great to see a "British" tank on here... Fed up with German big cats, etc... Good job!

You are a master of chiping,. Thank you for all of your solutions.

Je to jednoducho nádhera, ako každý tvoj model....ten dôraz na detajly, brutalne realistické je to....veĺa zdravíčka a teším sa na ďalšie videá....

That looks like it belongs in a museum. Very nice!

Any day your release a video is a great day, but the day you build a fire truck will be earth shaking! Trumpeter makes a nice American La France! There are also several nice European kits too!

So glad to see you back!!

Looks so real and amazing! Not too much and not too less, but just right weathering and coloring.

Excellent craftsmanship and process

Its been a long time since you made your last 1/35 scale model, another masterpiece good job

Watching this video makes me happy and inspired med to continue my work on my own models. hope to see more moderen armor from PLASMO :D

Awesome as usual! Loved the paint and weathering effects. Very realistic end product

I remember when back in the day my parents bought me an airplane model kit from a street vendor during a spring festival. I was extatic, built it and was really happy how great it looked. No paint or anything... Looking back. 30 years later, I find it both heartwarming and embarassing :)

As always. Beautiful. Thank you for your time and knowledge. Stay safe and happy