Cutting the gasket was a lifesaver, thank you man.

Working on a buddy's '03 Wrangler TJ, and this was the only video I could find that actually had the CCV instead of the PCV! Awesome tutorial, helped me out a ton after I destroyed the front elbow trying to get it out. Accidentally broke the crankcase to intake manifold breather tube while trying the replace the rubber fitting on it too. That was a PITA to find for the '03 but thankfully Amazon has it all.

Great content as we are sued to it but this was 6 years ago! I love when you specify the part numbers, that makes it so much easy to follow! Keep the great job!!

I have owned 5 jeeps with the 4.0 inline 6. They are one of the best engines ever built. I love seeing videos like this since with proper maintenance these engines can live well past. 300K miles. Love you channel, Keep up the good work :)

@JeepSolid

7 жыл бұрын

+KIN Thanks! I enjoy making the videos and helping people out.

@davehak2880

7 жыл бұрын

I have a 2.5 yj and I love it. Get decent gas mileage.. What do you think about the 2.5 motor?

Thanks! Excellent tutorial- concise, clear, nice video quality, no babbling BS, part numbers. What more could a DIY’r want? A #1.

Thanks for the excellent video. Great tips. I just replaced the old leaky one on my '01 wrangle. The grommet and elbow were super brittle. Cheers!

Thank you for this video I was frustrated trying to remove the old part and all I needed was a new grommet! You saved me hours of frustration.

Thanks for the part numbers. Two auto part shops incorrectly gave me the back one instead of the front. And now I know that tonight instead of tomorrow night!

This is the best video I could find on replacing these valves. Thank you.

Super Super helpful!!!! Broke mine in process of changing gasket. Super awesome for leaving links in the description! Thank you so much

@JeepSolid

6 жыл бұрын

You're welcome! Glad it helped you.

Please keep up the good work. Fantastic resource. Looking forward to doing a striker build on my XJ and learning from your videos along the way.

I was just looking at my 94 YJ and trying to decide the best way to pop those out, THANKS!!!!

Thanks for the video. I have a 94 and have subscribed to your channel. You have helped me with the valve cover gasket and now these pesky ccv's. Thanks again!!!

Good tip on grommet removal. Also, much thanks for part numbers!

@JeepSolid

7 жыл бұрын

+jaymes c You're welcome. Thx for watching.

Thanks for the part numbers made it alot easier going into Advanced

@JeepSolid

6 жыл бұрын

+Jheb 84 Cool. Glad it helped!

Thank you very much for the Great and clear Vids. I have a jeep Cherokee Poineer 4.0 1987. vacuum pressure is low(13-14), the RPM is unsteady and won't shift gear when going uphill. I have changed air control sensor, spark plugs, and fuel filter. I could not find a leak using brake cleaner. took it to two mechanic shops and they had no clue what they were talking about. thanks again.

As usual, a job that is simple on most cars is a pain on the Jeep. My 2001 Of the many cars I have owned over 60 years of driving, my 2001 Grand Cherokee is the absolute worst car to work on. You did a great job and I thank you for the help!

great video! I like yours better than the other guys videos. They just kept breaking them and your way seems so simple. Doing mine tomorrow. Thanks

@JeepSolid

7 жыл бұрын

+m medrano Great! Thanks!

Great job on that. I destroyed mine taking it out - this was artfully done. Thanks.

@JeepSolid

8 жыл бұрын

+Silky Tp Yeah, It looks super easy, right? Just pull them out! haha. They can be a real pain like you said!

@NathanKole

7 жыл бұрын

Silky Tp artfully done is right. I wasnt having any noticable issues, but decided I was due for a change after 18 years. My old ccv valve is in approximately 47 pieces right now, but thankfully all squared away now

@greg1268

5 жыл бұрын

HA! Yeah, I'm right about 50! Cutting the grommet is what saved me. I was a little being nervous about pieces falling inside but I made it.. @@NathanKole

Terrific video and to the point with part numbers even!!!!!!!

Just a tip: I was having trouble getting the valve into the grommet. I heated the elbow valve with a hairdryer to get it to fit!

Thanks a lot for your video, it helped me a lot. Very clear and simple directions. 🤫 (I have tried many ways and even broke valve in the process of removing.) Please keep posting.

Thank you for this. I'm about to change the oil on my mom's 2001 Jeep Cherokee and I'm positive the have never been changed, so it's nice to see a how-to done very nicely. I had my reservations about trying at first but now I'm just ready to get it done

@JeepSolid

5 жыл бұрын

Great! Glad it helped. Some are designed to turn 90 degrees and pop out. I'd try turning it first to see if it twists out.

@orochikaiba

5 жыл бұрын

@@JeepSolid thanks, I'll try that first. Maybe I'll hit pay dirt. But my mom has had her Jeep for like 10 years and I am positive this has never been done before so maybe not lol

very informative and great job with part numbers. Now I only wish I had a wrangler instead of a Cherokee. lol but, I learned something either way. cheers!

Thanks for the video! Just replaced my valves. My reason was actually because the hose going from the back valve to the manifold cracked, figured why I was in there, mind as well spend $25 and replace all the parts. I was getting some oil seepage onto the valve cover, so in the end it needed to be freshened up. For your viewers knowledge, I ordered the hose from my local auto store, got Dorman part #46006. This part actually doesn't fit the Wrangler, BUT, it'll work if all you need is the one hose leading to the manifold. It comes with two hoses taped together. The other hose (I believe for the MAP sensor) does not fit, I think it's intended for the Cherokee. I could have ordered the correct part from Chrysler, but I was looking at about twice the cost. 1995 Wrangler SE 4.0 liter I6.

@JeepSolid

7 жыл бұрын

Great Ian! Glad it worked out for ya and thanks for the tips on the parts!

Always reference back to your videos. thank you! this video shows the part numbers I needed also side note these do not fit on a plastic YJ Dorman cover I tried and broke a few times trying to make it work get the aluminum (2.5L on my YJ ) original hope this helps too. thanks again!

Solid info and job done!

Thanks buddy very good video!!!

hello friend, excellent video has helped me a lot because I have to replace the pcv valves, the technique you used has been very good.... It took me a long time to find the washers in Santiago de Chile because here they sell everything separately and I found them on Amazon, I bought them at Dorman and they arrived very quickly... Best regards from Santiago de Chile... ATT: Jamie...

THANK U SO MUCH FOR THIS!!!!!!

Wish you brought up something about the bushings. thank you for the video

NAPA P/Ns if you don't want to deal with Autozone or Oriley's. Pretty sure the Napa parts are from Doorman as well except for the small orifice elbow part number which actually has a Chrysler Pentastar on it, whoda thunk it. Front Elbow (No Orifice)- NOE 6301078 Rear Elbow (Small Orifice)- CRB 29574 (the picture on the NAPA website doesn't represent what you actually get) Grommets- NOE 6301411

hey great video! doing mine now. quick question, should I be feeling any vacuum on the front elbow? I removed the hose but I don't feel any suction from the hose coming from the air filter or from out of the elbow. the back one has great vacuum coming from the intake.

awesome thanks for help

Good video

amazing!

good video showing relevant tricks how to get the valves out - am not sure about where the CCV and PCV valve are located in my 1998 XJ 4.0 - front and rear - same engine you have - thanks.

@prestoc3034

3 жыл бұрын

They should be in the same spot (on top of the valve cover), but it is good to be sure of exactly what you have. Check out moparpartsgiant . com, and then select your vehicles info on the site, and then check out the part numbers and diagrams for the different parts of your vehicle, as to get an idea of what goes where. Some parts can be found/purchased on their website, but not everything is still being sold there, but with some searching elsewhere online, you will find the part you need.

@JoeVizethum

3 жыл бұрын

@@prestoc3034 thanks, dude - just checked: 53030495 is the rear valve which is discontinued, 53030991 the front valve which you can still order -- still not sure about the CCV/PCV difference and location front/rear.

@prestoc3034

3 жыл бұрын

@@JoeVizethum You are welcome. The front one that connects to the air cleaner box, is hollow, and the other one that connects to the intake plenum, is also hollow, but with one difference.. it has an orifice (a small 1/8 hole) to help stop oil splatter from getting up into the elbow. While the engine is running, air is vented and pulled from the completely hollow elbow (ccv), which draws from the air cleaner box, through the engine valve cover and out through the (pcv), which pulls the engine blow by into the intake plenum, via the vacuum pressure pulling the air through. For parts on your jeep that need replaced, try checking online at the "jeep hut", "rock auto", "summit racing", and if any of those fail at producing what you need, then you will have to check ebay and amazon, but be warned that they are not as professional to the auto parts info as the more 'dedicated to auto' stores will be. Those are the one's I have had luck with the most for my jeep parts. Summit racing is the fastest at getting things shipped out, but amazon is also speedy at shipping stuff out sometimes.. but they may ask a little more $$ for things.

Is the same valve in back that is on a 2.5 yj 95? i need to chance mine but i dont know if is pcv or ccv, or if is the same than a 4.0 engine

Thanks for these tutorials; I’ve replaced nearly everything on an old family favorite. Having a tough time finding the location of the Canister Purge Valve on a 1995 YJ 4.0. It has stumped 3 good parts mechanics and my favorite mechanic, who looked for it with me under the hood, and then couldn’t locate it while on the lift doing a rear main seal job. Any help appreciated.

Hey Jeep solid I know this is an old post but I’m trying to figure out why soon after I replaced my rubber grommets and pcv valves, my Jeep started up and died and hasn’t started in two weeks after? I have an 89 with a Weber carb, if you have any idea it would be awesome to know! Thank you and love the videos they have helped me a lot.

Thanks for another awesome video! I have an '88 YJ with the original Mopar Fuel Injection conversion kit installed. It is possible deteriorated PCV and CCV connections can cause emissions failures? Trying to find the source of my high Nox. It's frustrating because half the engine parts are from the '88 carbureted motor while the top half is mostly from what I think is the '91-95 engine setups. But not sure, one commenter below mentioned his '93 used a "twist lip PCV." I guess we'll find out. I purchased it with the kit, so Im sort of figuring it out as I go.

What happens if these are not changed? Got a 2000TJ 152,000 miles and never replaced them in my 4.0L

Thanks

I bought a '94 GC 4.0L for my CJ7 years ago. I ran it with no problems for a couple years. I had the Hesco mpi kit already when I did the motor swap. The frame started rotting out so I pulled the motor and a bunch of other stuff and got rid of it. I replaced it with my YJ. One of the first things I put on the YJ was the mpi kit and the 4.0 valve cover. I just pulled the 4.2 out of the YJ and swapped in the same 4.0 that was in the CJ. For the 1st time, I looked inside the valve cover when I went to replace the CCV and elbow. I was surprised to see that they were both CCV elbows with the orifice. As far as I know the motor was completely untouched when I bought it. It ran perfectly fine on the CJ and the YJ so I'm wondering if it was supposed to be like that? I put a regular elbow in the front like most all of them are but I've wondered about that since I saw it

could you tell me my 1997 Jeep wrangler is making that ticking noise could it be this causing it?

Great removal, one tip, don't use oil or petroleum products to help seat the elbows into the rubber grommets; direct petroleum applications on the plastic and rubber will break down both causing premature failure and brittleness. petroleum eats rubber and plastic. Use slimy spit after chugging a pepsi.

@revolutionday1

4 жыл бұрын

Uhhhhhmmmm......or just some silicone spray.

4 жыл бұрын

@@revolutionday1 lmao oh ya! You can use that too, but in my day I walked to school and work up hill both ways in 45 feet of blinding snow over 700 tons of broken glass with no shoes cuz they weren't invented yet and we had to... oops lost my train of thought... Yup silicone spray works too.

Wish mine went like this. Did this exact thing and the pcv and grommet starting coming off in pieces lol

Hello, just a question if you have a chance to answer. Will PCV and CCV elbows be the same for a 93 YJ 4.0? Because I looked up the part and it wasnt the same you have listed. Any info would be great thank you very much for your informative videos

okay, I might seem stupid but I am new to the jeep world and I have come into possession of a 1992 jeep wrangler yj 4.0L and the rear ccv valve is missing the hose. So my question is when i get the hose where does it lead too? the front one goes to the air box but what about the back one? I also have a few missing vacuum hoses and was wondering if there is a diagram somewhere that shows where all of the possible vacuum hoses are and where they lead too?

anyone knows which ones fits the 2.5 year 92.? it only comes with one.

I can't believe how efficiently you removed the old valves. This is some kind of witchcraft, I'm sure.

I ordered the aft hard line and the dang grommet on it will not fit the nipple on the intake manifold. It's supposed to be a direct replacement from crown. Any suggestions on hose size for that particular nipple?

Love love love your videos. I recently purchased a 1993 Jeep Wrangler Sahara with the intention of learning how to fix everything I can on it. That being said I have a question. I recently changed my PCC valve. I too have two of them however the back one isn’t connected to anything. It basically has a rubber stopper on the end. Is this normal? Have you heard of this? Thanks for all your help!

@mookie6914

6 жыл бұрын

I guess I should say CCV not PCV

@JeepSolid

6 жыл бұрын

The rear valve should go to the intake manifold.

Why would you need to change these connectors? What issues were you having?

The back little orifice to intake is a pcv valve. The front to airbox is ccv.

Hi Dan.. I have a 93 Jeep YJ 4.0.. I replaced both of them but still have oil going into the filter box and valve body.. any suggestions I'm stuck! Thanks

So my rear PCV/CCV valve on my 2000 TJ is leaking oil all over my engine. My oil level is on par so it's not leaking too bad, and I put about 3 to 4 thousand miles on it a year. I have work I'm going to do in the Fall with my rad that has a patch job over a pinhose leak, and was hoping tob put this leak off too. Long story short. I was on a 300 mile road trip everything is fine, but all of a sudden my cruise control is out, just stopped working. Then it worked again, then stopped. Next thing I got the check engine light. So I pull over and look under the hood. It's dirty, but my only known issue is it revved high in park, and oil leaks from that valve. Not much I can do on a Sunday in the middle of nowhere so I push it 100 more miles. Fuel economy seemed to drop, other than that no problems. Good oil pressure, 210 degrees, RPMs not indicating an issue. In fact it sounded great. My bet is that valve trapped enough air in my engine to set off the check engine light. However, my question is do you know of any way that may correlate with my cruise control, or should I hastily be looking at my throttle? Or anything I'm not thinking about?

any idea where to find the CCV hose? if it matters, I have the 2.5 L

Are these compatible with the 90 yj with a 4.2l engine?

What would happen if you deleted the pcv elbow and instead ran two ccv valves? Essentially both with big holes. I feel the 4.0 needs all the help it can get

Hi Dale, I was watching some video's about PCV (front of the valve cover) and CCV (back of the valve cover near the firewall) I'm planning on adding an oil catch can on my 2001 4.0 TJ but the problem is, I can find a legit reason to put it on the hose of the PCV but also a good reason to put it on the hose of the CCV. Have you done any research on that, what would you do? Thanks mate and regards from the Netherlands 😉

Will it be the same steps for the 4.0 1993 wrangler yj

@JeepSolid

4 жыл бұрын

Some valve covers are a little different. One style just turns and pulls out.

What’s happening...I have a 2001 WJ grand Cherokee 4.0 I have replaced the ccv and PCs and grommets...where does the hose in the rear connect to off the valve cover?? I am stumped cause I just don’t see where it is supposed to go? Please help it would be appreciated...thank you

Does the grommet come in silicone or something that doesn't disintegrate with contact to oil?

@JeepSolid

6 жыл бұрын

It holds up fairly well. It's designed for some oil contact.

so i have a question. i have a 91 wrangler with a 92 cherokee motor. 4.0 and after sitting for a few months it has developed smoking out of the ccv valve and is also smoking out of the dipstick. is this caused by bad ccv valves or worse. please let me know im at a stand still at the moment

Would those be the same pvc valves for the 2.5 engine aswell?

@revolutionday1

4 жыл бұрын

Nope.

What about the part numbers for the hoses in case we break them? 94 YJ 4.0L here

Where can I get a hose for the rear CCV valve?? Thanks

Hi! Thanks for the video! I know this is older, but hoping you still see this/reply :D The hose on the valve in the rear is very loose on my 92 wrangler yj and slips off very easily. Any recommendations on how to make sure it holds in place? Can I just fixate it with a screw-clamp-thingy? :D

@JeepSolid

4 жыл бұрын

Yeah, a hose clamp on it should do the trick 👍

@leobachinger7455

4 жыл бұрын

@@JeepSolid awesome thank you so much!

I was told there are no valve in these like a pcv, these are just a tube that is hollow?

Do you have part numbers for new hoses from the ccv valves???

@rogerrinkavage

4 жыл бұрын

Is there any chance you found them? Most importantly the rear hose...

I broke the back house trying to remove it. Where to get a new hose?

The hose that connects to the front valve.. well mine broke and I dont know what to order. The parts stores only want to supply the hose for the rear. I need mine to go to the air intake . 95 zj

Is it like a one way vavle

Is this same pcv valve for 1991 wrangler? 2.5l

@revolutionday1

4 жыл бұрын

Nope.

Could these being faulty make oil pressure higher?

@JeepSolid

5 жыл бұрын

I haven't heard that.

How do you know when these need to be replaced?

@chucky104

4 жыл бұрын

on my TJ, i have a check engine light code P0455, and i am hoping that is the issue, but after inspecting both PVC valves they are both in bad condition so i am betting that is the culprit.

I have a 96 4.0 in an XJ approaching 300,000 miles, and I know I have never changed these valves before. There are no obvious leaks, so is there any reason to just go ahead and change them anyways?

@JeepSolid

4 жыл бұрын

Only if they're plugged or not working

@erichimes3062

4 жыл бұрын

Thanks. Great channel btw 🤟

I have been having rough idle issues for a while now, this video helped so much lol. Basically the previous owner had the pcv valve for the back on the front and back which was the small hole. Do you know if this affected my idle at all? I just ordered the parts.

@JeepSolid

6 жыл бұрын

+bartle doo Glad it helped! May affect it a bit. Curious if you see any improvement.

What year is this jeep?

Where does the rear CCV valve connect to? Ive never had it connected. My front valve is connected to the air box.

@oliver4524

Жыл бұрын

The one closest to the firewall connects to a vacuum line to your intake manifold.

what are the hose part numbers?

@JeepSolid

6 жыл бұрын

Here's the parts I used in the video. Doorman front CCV/PCV valve: amzn.to/2vK5bb6 Doorman rear CCV/PCV valve: amzn.to/2wJHlRi Doorman Grommet: amzn.to/2wow0nc. If you're looking for the hose, they have it in bulk at any autoparts store. If you have a section to bring down, they can match it up. Then buy whatever length you're looking for. If you're missing the hose all together, I'd bring the PCV valve down and find a hose that fits well. It's just a breather hose, so doesn't have to be certain part #. Hope that helps.

How about making a video on how to replace the rollover vavle or making a video about Gas smell in your Jeep. Thanks!

@kyleminks6374

4 жыл бұрын

Eric Guterac 4.0 makes you tired too?? 😂

Where does the rear CCV originate? There isn’t a hose attached on mine.

@JeepSolid

5 жыл бұрын

Here's a picture that shows the vent tubing. I hope it helps. www.patreon.com/posts/ccv-venting-23709033

I did this fix and the Jeep went from running well to almost dying after firing it up, brings the rpm back up after catching itself, then smells like it is running rich and has a check engine light. Jeep is a 94 4.0 with 75k miles in the original engine. Any idea what could have gone wrong?

@docsopwith2536

Жыл бұрын

Bad MAP sensor screwed into the rear firewall just rear to the throttle body - has a small vac tube going to it,

On the PCV elbow, is there a valve inside it or is it just a tube??

@prestoc3034

3 жыл бұрын

The first of the 2, (the ccv) is fully hollow, which connects to the hose from the air-cleaner box. The other one is the pcv, and that one connects to the intake plenum, and is hollow as well, but on the bottom side of it, where it goes into the valve cover, has an orifice (1/8 inch hole) to help stop any oil splatter from getting up into the elbow and through the vacuum tube.

@jat-justamaturetech-philpj8285

3 жыл бұрын

@@prestoc3034. On my 2000 jeep grand Cherokee Laredo 4.0 it's the opposite. My pcv goes to the air box and ccv goes to the intake. Just to be clear. The pcv is located on the top front of the valve cover and is the tall one?? The ccv is the short one almost flat and is the back one?

@prestoc3034

3 жыл бұрын

@@jat-justamaturetech-philpj8285 Ya the design changes somewhat over the years on that part of the jeep engines.

Hi Dale, well not quite finished in my book. If you don't check that the front and rear air lines are clear you have wasted your time and money. Having worked on several Jeeps where the rear manifold vacuum air pipe connector has been plugged with oil and carbon deposits. Thus stopping any vacuum being created under the rocker valve cover. It pays to be thorough and pay attention to detail.

Looking for some help... I just bought a 94’ Cherokee with the 4.0. As I’m giving it a tune up I’ve noticed the grommets are plastic and are leaking oil. There is no simple rubber grommet to cut off when replacing the PCV valves, instead it’s plastic and seems like it’s going to break. Surely someone else has came across the same problem?

@bradleyaleksander6378

4 жыл бұрын

Some valve covers are different and the pcv valves lock/ loosen by turning them. They have 2 groves on the bottom the rubber is under the pcv itself. I'm looking up the part #s, I've only found the front open pcv valve going into the intake air box. # 47056

@bradleyaleksander6378

4 жыл бұрын

OE REPLACEMENT FRONT & REAR BREATHER VENT SET PART# 53030591 & 53030492. teamcherokee.com/front-rear-valve-cover-vent-set-cherokee-4-liter-1991-1993/

@rogerrinkavage

4 жыл бұрын

Not that it is helpful for you to know at this point, but they are (or were) rubber. They have just hardened up over the years.

@justinearnheart2240

4 жыл бұрын

Roger Rinkavage exactly what my problem was. Took forever to get them out (they broke in pieces coming out) but I got them. Thanks!

@rogerrinkavage

4 жыл бұрын

@@justinearnheart2240 yup! Wish me luck getting the valve cover back on lol

What caused you to change this?

Well that wasnt right. I have a 1991 jeep and it just turns and pulls out easy. Broke it doing this method

@JeepSolid

4 жыл бұрын

Yeah, there is more than 1 style.

update : it didn't come out as easy as yours. I had to break it all apart but luckily nothing got in the valve cover. Rear CCV valve was not breathing at all.

@JeepSolid

7 жыл бұрын

+m medrano Yeah, they can be super brittle. Glad ya got it. Hope the video gave you some help?

@PaleoBunny

4 жыл бұрын

@@JeepSolid are you still online?? I absolutely cannot get these suckers out. Now the ccv is kinda in the intake I don't have channel locks, I've been trying to pry it out. The elbow broke on the front lol so I just am sticking a screwdriver in the hole and trying to pry it out but to no avail. Any ideas?? Eff it and try to get it out?? Lol

@JeepSolid

4 жыл бұрын

@@PaleoBunny Maybe try spraying a little WD40 on it to help it slip out. Then if you just can't get it, you can always remove the whole valve cover then pull them off.

@PaleoBunny

4 жыл бұрын

@@JeepSolid thanks, I sprayed some PB blaster on it before hand, I think it is what caused the slippage from the pliers got the front one out... Had to basically push it in and pull it out. It came out in 2 pieces so that's good lol I will try the back tomorrow.

Why the heck hasn't anyone manufactured an aluminum or steel replacement elbow yet?! If anybody has a line on one, I have a valve cover gasket replacement in my near future and would like to remove this cruddy plastic part if possible.

P.ositive C.ranckase V.entilation "PCV Valve"*

What happens if I replaced them with pcv value

This is a lot easier if the engine is hot

@JeepSolid

7 жыл бұрын

Things are easier/looser when hot, good tip! Thanks for sharing.

For anyone else with a 93 YJ, I found out it has a different PCV valve than the one use in the video. To remove it, disconnect any hoses, then twist counterclockwise 90 degrees and it pops right out. The valves have different lock and twist lips and the ones in the video wont fit. heres the front valve on amazon: www.amazon.com/gp/product/B000C5I4ME/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1 and back valve: www.amazon.com/gp/product/B01EIBOFIO/ref=ox_sc_act_title_1?smid=A108VDUN6CJBUD&psc=1 As a side note, under the front and back pcv valves there is a pretty big buildup of sludge/ carbon there. any advice on how to clean that gunk out before it damages the engine??

There not both ccv valves just the back

AM I GOING FREAKING CRAZY!!!! why can I not for the life of me find a CCV ANYWHER!!! both stores and internet all I see is PCV PCV PCV PCV PCV PCV PCV PCV PCV PCV PCV PCV PCV PCV I GO TO AUTOZONE ORIELIES WHATEVER AND THEY ONLY HAVE PCV?????!!!!!!! UGHHHH WHAT THEHELLL!!!!!!........ I need a fraking CEEEE CEEEE VEEEEE VAAAAAAALVEEE!!!!!!! DAMIT!!!!!! THEY ARE DIFFERENT RIGHT RIGHT RIIIIIIGHT!!!!! I KNOW THEY ARE! FRAK!!!!

@JeepSolid

5 жыл бұрын

I bet most list them as PCV, where if they're the correct fit for your Jeep, they should work.

@citydemo5701

5 жыл бұрын

@@JeepSolid are you saying that I should just throw two pcv valves on each end just cause they fit? cause thats exactly what you said. I heard a pcv valve has different inner components and opposite function than the ccv?

@JeepSolid

5 жыл бұрын

I'm saying many places list them as pcv, because that is the common term. The ones I link in my video are the correct ones for my engine, and they are listed as pcv, but don't actually have a valve. They are just open elbows, with metered openings. Places just label them as pcv.

OMFG, these people with rubbing OIL on everything, when they make something called "silicone lubricant" for jobs JUST like this.