My 2015 Honda Fit had this problem. Turns out there's a rubber stopper at the top of the clutch pedal that engages a switch to tell the car when the clutch is or isn't engaged. The stopped had worn away so the switch wasn't engaging. $10 for a new stopper and 30 seconds of work, good as new. While I was at it I replaced the one on the brake pedal too (the stopper came in a 2-pack for both pedals)

Something not mentioned is my issue, the yaw/acceleration sensor. Only determined when looking at live data, both acceleration numbers never change, but yaw is good. Secondary market (salvage) is empty around here as scrappers have no idea these exist. I did let local yards know they’re throwing away hundreds of dollars on a part that’s 600- 1000 or more depending on your source.

Wrong tire size can trigger this error as well correct? Is there a way to use a scan tool to change the configured tire size?

07 Honda Odyssey EX-L, with engine code J35A7. Scanner picked up P2647, P0523 and P2649 codes. Replaced VVT solenoids and assembly with new screen and gasket. Change engine oil and filter. Check wiring harness and have over 5 VDC. Even place a washer gasket on the VVT solenoid. What else and I am missing? Please help. Thank you!

Hi I have same problem I change Angle sensor & still problem and given code 134-01 angle software

I have a 2007 CRV with the VSA light on solid. What should I do to troubleshoot it? I don't have my scanner tool with me.

Jump pins 4 and 9 and do the reset procedure without a scan tool. Most times you can just do the reset procedure and then if the problem comes back then take it to a mechanic.

What about the rocker arm oil pressure switch?

i have a 2008 element,vsa comes on and vehicle bucks when accelerate what could be the problem

The VSA, ABS and parking lit up on my Honda Fit 1.5 RS 2009. What gives?

Why does my car now have aloud noise coming out of it sense I drove it home after the vsa light came on?

2010 Honda Element with 195K mileage: VSA Off indicator light will not turn off. Reset but keeps coming on. Code 26-1 on scan. Any ideas? Thanks for this helpful video!

@HVAC_Mechanic

6 ай бұрын

26-1 Code: Lateral acceleration sensor malfunction

I have a question can you please help if you can ? My VSA light with come on when I drive , but if i turn the car off and turn it back on it will go away and like 30 minutes later or some times won't be en come on ! Pretty much it comes on when ever it wants i already reset the light. And it keeps on coming back on , please help

@Jesus-ov8fk

Жыл бұрын

Same problem here did you fix it ?

@joemamaz7290

Жыл бұрын

same problem

@stevenliberato2600

Жыл бұрын

Yea I’m having the same problem today 🤦‍♂️

@vortex_sa2278

Жыл бұрын

Could be a loose connection or ground. Could also be that the wheel speed sensors are dirty, which is common.

@eyem27

11 ай бұрын

Same problem.I went to Honda and have it diagnosed.They said I need to replace VSA parts which costs $3000.I got second opinion and said the same problem but it will cost me $1500.

I'm not sure if you're still reading comments from this video or not but I have an Acura 2006 and the VSA light stays on however when I'm driving on the highway, I'll get the check VSA system on my dash then I have to pull over, restart the car and then it goes away. Is there a reason the light would stay on but the dash message will only come on on the highway?

@LeeshaKay1990

5 ай бұрын

But no abs light.

I had my catalytic converter stolen, and the light came on as soon as the new one was installed. The shop that installed the converter told me that all the codes were clear. Any idea?

@wazzap97

11 ай бұрын

Same … let me know

My 2010 honda accord coupe 3.5 liter vsa light goes off and on but it kicked the engine light on now the car is running sluggish and auto zone did a scan its missing on all cylinders do I need to replace the module or what's your thoughts buddy I need some pointers

@JereB698

3 ай бұрын

If you have misfire codes those are the likely cause.

@jrocc_kmh

3 ай бұрын

@@JereB698 could It be the speed wheel sensor or a clogged fuel filter those things with set the vsa light on and the engine light right 🤔

@JereB698

3 ай бұрын

@@jrocc_kmh If the engine is having an issue (misfiring) the computer shuts off driver assists which is the VSA lights. Basically follow the codes.

@jrocc_kmh

3 ай бұрын

@@JereB698 now it saying misfire on 3

I have a 2006 Honda odyssey I’m getting a rubbing sound from front wheel then a flashing VSA light when it happens.. don’t do it all the time