Cateye NBS Silverado Upagrades on the Cheap Part 1
Автокөліктер мен көлік құралдары
Cateye NBS Silverado Upagrades on the Cheap Part 1
Parts Used
Billet Bowtie amzn.to/3zMSpxj
Speaker Holders amzn.to/3QzixS6
Speaker Baffles amzn.to/3zOM0lo
Short Antenna amzn.to/3QxgCh1
Speakers Installed amzn.to/3O739uQ
Tools Used
Dewalt Impact amzn.to/3NWDnJL
Panel Removal Tools amzn.to/3NVWiEh
Needle Nose Pliers amzn.to/3Hv2h0k
Clip Removal Tools amzn.to/3mSneJu
Black Tape amzn.to/3xyXRkA
Pick Set amzn.to/3NVavkN
Solider Iron amzn.to/3HEhaxO
It's time for a few small upgrades on the 2006 Chevrolet Silverado Cateye NBS Regular Cab. When I bought this I knew it would be dependable and we could dress it up a little at a time. I have decided to take a different approach with this one. I want to use mostly used parts and see how we can make it look. Some items we will not be able to buy used but for the most part I am going to search for used stuff. In this video we install a new billet bowtie, short antenna and glass from a donor vehicle. I also install new speakers in the doors. I show you how to remove the side glass in a silverado or sierra. The process to replace the door glass is not hard. If you have a 10mm socket and a helper, it can be done in less time than removing the door panel takes. I will say I may have to remove the window tint because without the back window done, your eyes can't adjust which makes it hard to see. For the door speakers I installed some Memphis speakers out of my green Sierra with new baffles to protect the speakers and metra mounting rings. The rings make installing speakers in a silverado or sierra a breeze. The baffles increase the output and also protect the speakers from moisture in the door. The final thing is the short antenna. I think I have one on every single vehicle in my fleet. LOL Hit the Comments and let me know what you think.......
Thanks For Watching!!!!
Subscribe and Follow TWA Motorsports
KZread: / twamotorsports
Instagram: / twamotorsports
Email: twamotorsports@hotmail.com
Video Equipment used to make this video(Need to update)
Gopro Hero 9 amzn.to/2Of60Z0
GoPro Mount amzn.to/3pf1HvX
Gopro Session amzn.to/2IZprAp
Video editing amzn.to/2NawHtz
Photo editing amzn.to/2NawHtz
As Always Thanks For Watching!!!!!!
Do this at your own risk. For entertainment purposes only
SUBSCRIBE FOR MORE VIDEOS!!!!
Disclaimer:This video and description contains affiliate links, which means if you click on a product link, I'll receive a small commission.
Пікірлер: 83
I just finished installing a 2014-2018 rear bumper on my 2006 silverado. Bolts right up, awesome upgrade! Corner steps and trailer connector in the bumper.
@TWAMotorsports
Жыл бұрын
I have seen that before. Different look
Absolutely love NBS content man, I enjoy these little fixes, very satisfying
@TWAMotorsports
2 жыл бұрын
Thank you. This one will get small things and will stretch over time.
I subscribed mainly cause you are in my opinion the best chevy pick up content and the most dedicated channel for NBS and cause I got me an 04 Avalanche so figured I take in as much information from your videos as I enjoy this avalanche I got me😎 thank you and keep up the great work
@TWAMotorsports
2 жыл бұрын
Thank you for subscribing and watching
Always ready to watch when it’s nbs content
@TWAMotorsports
2 жыл бұрын
Thank you. Lots of it here
back with some NBS content, love it!!
@TWAMotorsports
2 жыл бұрын
Yes sir. More to come
@michaelm3381
2 жыл бұрын
Perhaps f-body content Thursday...
@TWAMotorsports
2 жыл бұрын
It may work out that way
Can't wait for #2
@TWAMotorsports
Жыл бұрын
Have done a few more but didn't continue as part 2 or 3
Nice video on your son's mowing truck... I'm just catching up with your video this Tues morning because I pulled some overtime at work yesterday and didn't get home till late..
@TWAMotorsports
2 жыл бұрын
Thank you Keith. Need that ot money for trans am parts.
Hell yeah NBS content
@TWAMotorsports
2 жыл бұрын
Way more to go
I love 99-06 Gm models 🔥🔥
@TWAMotorsports
2 жыл бұрын
Me too
Nice work truck for his mowing hustle!!! ✌🏻
@TWAMotorsports
2 жыл бұрын
That's what I thought
I bet you could literally build a nbs truck blindfolded! This one getting better one piece at a time!
@TWAMotorsports
2 жыл бұрын
Probably so. Just like Johnny Cash
keep up the good videos !! you should make a diy video on buffing, polishing on the black truck
@TWAMotorsports
2 жыл бұрын
This one is too far gone really
Very informative thank you
@TWAMotorsports
2 жыл бұрын
Thank you
Nice video and thanks for sharing
@TWAMotorsports
Жыл бұрын
Thank you. Hopefully it helps
I'ma need the speaker stuff for my mustang 😅 early excited me didn't know about those
@TWAMotorsports
2 жыл бұрын
They are nice parts.
I used the rocker covers on my ext cab they work amazing and cover all the rust
@TWAMotorsports
2 жыл бұрын
I need to try them
@williamgordon764
2 жыл бұрын
I haven't been able to find the rocker covers for the regular cab, it's what I was planning on my cateye as well
@TWAMotorsports
2 жыл бұрын
I think you can use the extended cab ones.
@mazdajason
2 жыл бұрын
@@TWAMotorsports I messed up and ordered 4 door ones for my ext cab but lined it up cut and you cannot tell
@TWAMotorsports
2 жыл бұрын
I need to order some
Snidertron3000 put some on a truck and they looked surprisingly good. It was an older video of a gold truck.
@TWAMotorsports
2 жыл бұрын
I saw that
I had the same version only in 1989 , 5 speed trans .. great truck
@TWAMotorsports
2 жыл бұрын
They are good trucks
@466rudy6
22 күн бұрын
That doesn't really sound the same.
have you thought of vinyl wrapping it? be a good way to make it look respectable
@TWAMotorsports
2 жыл бұрын
I have actually
Perfect series ! I appreciate the content! Anywhere I can contact you ?
@TWAMotorsports
2 жыл бұрын
Thank you. Video description has my email address
hd bumper pad conversion??
@TWAMotorsports
2 жыл бұрын
Probably not
What are part # for speaker pods?
@TWAMotorsports
9 ай бұрын
Parta listed in video description
Hey Travis...If you want to sell the front bumper let me know... It looks like its in decent condition... No dings or dents. Maybe we can work something out
@TWAMotorsports
2 жыл бұрын
Will do. Ha e to find another first
I used one of those same black grill emblems on a Silverado I had. Does that short antenna get good reception in the country areas?
@TWAMotorsports
2 жыл бұрын
I can get stations 50 miles away with it
@bdtaylor1979
2 жыл бұрын
@@TWAMotorsports ok. I’ve tried a couple others and they didn’t get that good of a range.
@TWAMotorsports
2 жыл бұрын
Every area is different. Depends on buildings and trees
@bdtaylor1979
2 жыл бұрын
@@TWAMotorsports ok. It says it doesn’t fit my 2007 Avalanche but I would think it would have the same antenna as a Silverado.
@TWAMotorsports
2 жыл бұрын
It should
Will this get lowered eventually 🤔
@TWAMotorsports
2 жыл бұрын
Of course
I have a brand new Chrome bumper, that I am looking to get rid of.
@TWAMotorsports
2 жыл бұрын
Gm?
@josezuazua7936
2 ай бұрын
Ever get rid of it?
@markbarilleauii6337
2 ай бұрын
@@TWAMotorsportsYes it was, only buy GM body parts, no thin metal replacements. I do still have a black tailgate, ac lines and condenser, radiator support mount w/ factory trans cooler(used, but in good shape)(that the headlights and radiator attach to). Radiator support brand GM painted Satin Canyon Black. Condenser may have a buyer but everything else is for the taking. After I get my trans rebuilt I may have some other parts also to go, like my factory 20" rims (chrome), a slightly used throttle body, spacer and cold air intake. Not sure what route I am gonna go this time.
@markbarilleauii6337
2 ай бұрын
@@josezuazua7936 Sorry yes the day I posted it someone emailed me.
@TWAMotorsports
2 ай бұрын
Yep
Do you know where I could get a hd Cateye front end I have a 2000 gmc bubble eye and I want to convert it
@05molinatsx
2 жыл бұрын
Facebook or offer up, they are not cheap anymore
@TWAMotorsports
2 жыл бұрын
Like he said. Maybe local salvage yard
🙏👌
@TWAMotorsports
2 жыл бұрын
👍
Put a bug shield on that hood to cover up that dent.
@TWAMotorsports
2 жыл бұрын
Lol. Needs some love
Hate to be that guy, but the cat eye trucks are the NNBS, is this a cateye rront end swap?
@TWAMotorsports
4 ай бұрын
What?
@SlowSTEN
4 ай бұрын
@@TWAMotorsports NNBS is 2007+ (Cateye) NBS is 1999-2006 (Bubble eye) you dont have to believe me, the forums will point you the same way.
@TWAMotorsports
4 ай бұрын
@SlowSTEN wrong but whatever your read online is probably right
For shits and giggles do a leveling kit and 33s for the truck
@TWAMotorsports
2 жыл бұрын
Lol. Not my style