One of my Grandma’s friends now owns one.

I can watch this stuff all day! I have an 87 580K with lever swing. These things are tough! Runs Great no matter what temps are outside. I'm subscribed to your channel hoping to catch any hydraulics diagnosis you may do. I developed a hydraulic issue with mine where there is a constant load on the hydraulic pump but when the loader is raised or lowered the load goes away. Load returns when the loader lever is released. I'm stumped at the moment. I believe its a blockage but don't know how to isolate/diagnose it yet. I did post a short video on my channel, a hydraulic schematic and a more detailed description for anyone that has any suggestions! BTW, I hate how Case set up the boom lock.

@AndyFromm

Жыл бұрын

I dont like the overcenter lock either. I watched your videos, have you tried moving the rear valves one at a time? Possible one of them isn't returning to center? Mine will have a slight load sometimes do to the self level front loader but I know that's not what you have going on.

@partsisparts9568

Жыл бұрын

@@AndyFromm I'll double check the control valves. I did change all the o-rings in the BH valve assembly and checked for dirt or other restrictions but nothing found and no change in the problem. Thanks for taking a look at the video. I'll post an update when I figure it out. -Kevin

Good grief, I had to put a jacket on just to watch your video! You need to move south Bro! Gooooddddd vvvideooo thoo. BRRRRRRR

@AndyFromm

5 жыл бұрын

I think the same thing more every year... we just got a pile of wet heavy snow yesterday and sleet all night..

My old man dumps a cup or two of rock salt ever few days in his, he’ll chase it with a cup of water too

@AndyFromm

5 жыл бұрын

Thanks

What’s the fastest way to get this exact back hoe up and running it’s been abandoned at an home owners association they had a company move it in to the wood so they would get fined by the township they broke the side small window drivers side back tire is flat it’s been sitting in the woods right off the dead end street for a bit over 3 years they said I could take it if I want it I do but I have no dam clue how to work on diesels

@AndyFromm

Жыл бұрын

Any idea on what broke? The engine itself, alot of times if it has just been sitting, it will start with little effort.

@donwan3083

Жыл бұрын

I could really use a machine like this to grow my lawn business especially for hardscape projects but it’s main use would be on my parents 17 acres they won’t sell me there land they said it’s mine when it’s their time I would use this machine to make our pond a lot bigger than what it is now I could move a lot of shale rocks that r everywhere along with smoothing out the trails and reseeding them probably have 2k hours of work at the very minimum just hope I can get some insight how to get her up and running get all the fluid changed out new tires all around new seat it’s completely shot and have to replace the broken piece of glass and get the im guessing heater vents cleaned out as well redo the old lights for all leds and probably get a high powered led bar mounted on the front thanks for any info and advice in advance thank you all

@AndyFromm

Жыл бұрын

@@donwan3083 first step is to find out why it was parked. "What broke"

What backhoe controls is this machine?

@AndyFromm

5 жыл бұрын

I will have to look again. I thought it was sae but when I googled, it looks like iso. Some on google said case & cat are the same.

@AndyFromm

5 жыл бұрын

www.tractorbynet.com/forums/files/construction-equipment/500440d1488401231-backhoe-control-configuration-backhoepic4-gif

@AndyFromm

4 жыл бұрын

kzread.info/dash/bejne/dWeiuJqnm8-0pto.html