Thanks for the video. I followed your instructions on a 2017 Special Edition last evening. Here is a tip for anyone installing who doesn't want to break tabs on the old usb hub to remove. That box that the USB comes in is the hardest thing to remove. So instead of removing it, when you have enough room behind the assembly, insert a flat top screwdriver to press the bottom left tab (from behind) and leave the screwdriver inserted. Then from the front side using your thumbs push the top two tabs and the pull forward with your fingers. The USB hub will pop out of the box saving you from removing the box or breaking tabs. Great upgrade and fun little project if you don't mind pulling apart your car interior. Good opportunity to clean areas that don't get cleaned.

For anyone who watched this and wanted to faint or second guess a self-install: I just finished installing this in my 2017 and did not need to remove ANY middle console area at all. I just popped the clips off of the top of the old AUX box from the side (from the glovebox), and pried the box out with little effort. This shortened the job down to about an hour. Everything works great, and I love it. :-)

@therearen0rules

5 жыл бұрын

Hi there Brady, I'm wondering if you can elaborate on this a little bit. Did you use any tools or was it as simple as reaching your arm in from the glove compartment opening and undoing the clips with one hand? Thanks in advance!

@iohin

5 жыл бұрын

?

@MarkAppleget

5 жыл бұрын

Worked for me. Just used a long screwdriver to break off the top tabs and then worked the hub out. 5 min job. Thanks for the suggestion!

@jordangzesh9656

4 жыл бұрын

You didnt replace any cabling?

@jordangzesh9656

4 жыл бұрын

@@MarkAppleget Did you actually snap the plastic tabs? Damage anything?

This is great. Thanks for documenting your tedious work to make it easier on the rest of us. Keep up the great work

I just got a 2014 Mazda 3 GT Hatchback, it’s a very nice car. Interior is very nice, and upgraded the touchscreen to Apple CarPlay. I like how Mazda provides a oem kit to for it, no other company does this. Very impressed with the car.

My Man, you did SO much more work that you had to dismantling so much of the car. Thanks for the video :)

Helpful video. An additional tip. As shown in the video, the USB hub is only held in by 4 tabs. It's possible to slide 4 thin items (I used steak knives) in the crack where the tabs would be and then push the old USB hub out from the back with a long stick. It's not easy but it eliminates the need to remove the center console to switch hubs.

@theonlydiego1

3 жыл бұрын

is the new unit plug and play?

Thanks for this video! Ain't easy, but with patience and your video and a few other videos & manuals, I now have CarPlay/Android Auto in my new-to-me 2018 sedan.

@winterMB91

2 ай бұрын

Does it work android auto touch screen and map?

Update FW first! The center trim and vents were stressful getting off, but just wedge it loose and pull steadily with a good amount of force until it releases. Also, just use the new hub to figure out where the clips are holding the old one in. Take a thin flathead and push it into the 4 clips (pretty deep in) and wiggle it out. Makes it so much easier.

Thank you, I’m about to embark in this mission, thanks for the guiding looks tough tho, I hope not to break anything on the process or to remember how to put it back

Hello, I have ‘17 Mazda 3 and just order the kit for Apple CarPlay. I just have one question, where did you download the new firmware from? Do you have a link? Thanks again!

Hey guys if you're skinny like me you can get away with only removing the ac trim, the head unit and the glove box. I snaked my arm through a hole on the left side of the glove box and used plastic spudgers to blindly unclip each of the 4 clips on the USB hub. It's pretty painful and difficult but it's the least destructive method and takes the least amount of disassembling.

I see he’s connected with a usb cable. Does this only work by connecting a device via usb? Will it work with Bluetooth like the car play that comes preinstalled in new cars?

Can you watch movies through android auto or apple CarPlay?

is necessary update my firmware? I have 59.xx version

Good informative video. One day I will probably have the itch for Android auto and install this.

@lastlings

Жыл бұрын

Update: That day has come today. Installed the Android Auto Module on my 2017 Mazda without removing everything. Ripped off the front face of the old USB hub and then poked away at the four tabs while pulling it out with pliers. I tried poking at the two tabs from the top and pulling but because I had the manual AC version Mazda, it was blocking one of tabs. Overall took about 3 hours of trial and error and I would say it was worth it.

I forcefully pried our the old aux box using prying tools. It wasn’t pretty, but it saved me a lot of time.

Does anyone which exact apple play usb to buy? Ive noticed that there's a lot on amazon and unsure on which one to purchase. Thank You

How did you get the touch screen to work ?

I was contemplating doing the install in my 2018 Mazda 3 (unit also located in front console) but after watching this, I think I will reconsider doing the AIO tweak, using the serial hack but I suspect that is not going to fly either as my MZD firmware is already updated to 70.xx

@spawnofsteve

5 жыл бұрын

There's another video of a hack where the faceplate of the old console unit tabs can be drilled and will be popped off, and then the wires are just fed through without removing everything. Search "android auto install hack" I think. I was deterred after watching this video since it's way too involved, but I'll be trying the other method.

@MasterShake300

4 жыл бұрын

@@spawnofsteve did you do it? Was it successful?

@spawnofsteve

4 жыл бұрын

@@MasterShake300 very successful. I just used a small drill bit (I had access to a 10 inch long 1/8 inch bit and carefully drilled through the face of the old hub. I didn't damage any of the console, but just be real careful, cuz it wouldn't be hard to. The rest of the install is the same, you just don't have remove that entire middle area.

@dtran11

3 жыл бұрын

@@spawnofsteve can you provide the link to this other method thanks

@spawnofsteve

3 жыл бұрын

@@dtran11 kzread.info/dash/bejne/m4ilp9aGaZTaYKg.html

thanks. very helpful video. does the carplay work with bluetooth or do you have to keep the cable connected to use carplay? also, how to use it while car is in motion as I believe touch will be disabled.

Could you take the car to the dealer so they could install it?

where did u get the stuff to download it

Thank you for your video! the unit in my 2016 mazda 3 is also located on the front console rather than the rare console lol.. May I ask where did you get these parts? my local Mazda dealer does not let me purchase it since they said those parts are currently for mazda 6 only

@natep3267

5 жыл бұрын

my advice would be to call around to other local dealers. The first dealer I called acknowledged that they had the parts but were not selling them to walk-in customers and reserving for mazda 6 owners. Called another dealer and they had no problem selling me the parts. so... seems to vary dealer to dealer. good luck! Also, parts were just over $200 total.

How does CarPlay work with your heads up display when it comes to navigation? Do you still see directions there as well like you do with the original navigation system the car comes with? If not, does the heads up display link in any way with CarPlay at all? Or you just basically lose your heads up display after installing this? Thanks.

@schlurrp

2 жыл бұрын

hey, did you end up finding out? considering doing this too and although from what i can tell, i wont be getting navigation on my heads up display, i think its worth the sacrifice

@dietterzambrana6952

2 жыл бұрын

@@schlurrp will be installing CarPlay to my 2017 Mazda 3 in the next couple of days. Will let you know for sure but I think you do lose the ability to use your heads up display for navigation purposes.

@sheldonalphonso9961

2 жыл бұрын

@@dietterzambrana6952 Hey Dietter, did yo manage to install it and whats the update on the heads up display

@dietterzambrana6952

2 жыл бұрын

@@sheldonalphonso9961 hey, so yes I did install it and your heads up display won’t display actual directions while you’re using the Apple Maps, Google Maps or Waze. I guess it only works when using the original Mazda navigation system. However, while it doesn’t give you directions, it does give you still your speed and warnings and that kind of stuff.. just not actual navigation directions.

Where did you get the Module with carplay/android auto I googled the Model number and didnt find anything except for an ebay link but... its ebay...

@natep3267

5 жыл бұрын

Purchased from a local dealer - see my reply below to the comment before yours.

Where did you get the update ?

This is an informative video. however, if I may add some constructive opinion; it would be more watchable if you held longer, steady shots from sitting in the seat, then maybe when you explain how to disconnect this or remove that, explain it with the shot steady and it will be clearer and more watchable. good content.

Do you have a link/ source on where you purchased this kit??

@antmanv05

4 жыл бұрын

did you get your kit? I'm installing mine now. It's not hard at all. I've installed many car stereos, video, cameras, etc. in vans and cars, this one's among the easiest yet. I could do 2 a day and still have a life and make $1,000 a week without trying.

@roastedpringle4818

3 жыл бұрын

@@antmanv05 where did you obtain kit?

So Mazda down let you use the touch screen while driving. Does the car play let you use the screen while driving?

@natep3267

5 жыл бұрын

No, the touch screen is still disabled when the car is in motion

2016 CX-5 has the HUB USB in the same location that rear console, HMI console, shift lever cover, ATX shift knob clip, glove box, trim panels, all had to come out as the way it is designed one part snaps into another, really a pain as it could have been designed, much simpler. At least car thieves will not have an easy time if they want to get at it

What happens if you start the car with no phone connected? Will it revert to the radio like it does for the regular phone connection?

@natep3267

5 жыл бұрын

Yes, unless you have the phone connected, CarPlay will not start. If your iphone is disconnected, the standard mazda interface will display.

You got balls man! Well worth it...I should hope so...maybe tearing your whole car apart is easier than I think...jeez! Good for you!

I have a 2017 Mazda 3 as well, was your screen touch screen before you did this?? Mines not so I’m not sure if I have this done if it will work or not

@lour58

4 жыл бұрын

Yours is also touch screen .lol

@jenny.brookss

4 жыл бұрын

Luis rivera yeah I figure that out after I posted that😂

Could you move the aux box to the center console instead of the front if you wanted to?

@natep3267

5 жыл бұрын

Yes, i don't see why not. In my glovebox there is a prefabricated section for it. I think some models come with a CD player in the front, hence the spot for the aux box in the glove box.

Thanks for the detailed instructions. Installed it today. Had a heart in mouth situation when I tried to test AA-> console blanked out. 🤨 Turns out battery died. Jump-started and all worked ok.

@Sahilford

4 жыл бұрын

lode...bina apple carplay ke nhi jee skta kya...

Thanks for posting, Nate! I have a front aux hub as well and it doesn't look like it's an easy task, definitely very fiddly but your experience comes in handy! In hindsight, would you do it again? :)

@natep3267

5 жыл бұрын

I enjoy this kind of thing, so maybe I am different... But I've heard the dealer will charge you around $200-$250 in labor for the install. Parts are about $200. So, depends on how you value the 3-4 hours this will take you. That being said, the install is definitely not 'easy.'

@afuddyduddy

4 жыл бұрын

@@natep3267 Found this because I want to get the legit upgrade, and maybe speaker upgrade. This video convinced me the $410 quote I got from my local Mazda is probably worth it. Thanks man!

Hi I m in Vancouver. Where can I get someone who can install it

Ahhh crap.....I'm running 3 CVRs off of the rear driver side... I could not pull that thing out, then I thought, what happens if I get it out, and they're still no RCA's in the back.... just end up splicing speaker wires anyway... I'm going to watch the whole thing

Whats the difference between this method and just flashing software with a USB drive?

@johnathanzamudio205

4 жыл бұрын

This method is mazda authorized. However the flashing method is better if you're on the firmware below 70.00

I was told that it costs $199 to have this installed at the dealership. Not sure if that includes labor, but I found the product on Amazon for $152... All that to ask: Do you feel this is worth saving the $48, or would you recommend just taking it to Mazda?

@elizabethc4980

Жыл бұрын

For me, in CA, around the time of your post, it would cost $500. that is including labor. I decided not to go with the dealership. I am not sure if the price has gone up since then

@PrateekAgrawal

Жыл бұрын

Elizabeth is right. Installation is 200 +Labor and the original part itself is 150

Would you mind telling me what trim level your car is? I’m in the market for a Mazda 3 for a daily to take my rx8 off main duty- and I really want a manual but I’d like the automatic climate control

@natep3267

10 ай бұрын

This is a 2017 Mazda3 hatchback, grand touring trim level

Will the car battery last while upgrading the firmware? Or you need to charge it within process?

@natep3267

5 жыл бұрын

I had no problems with the battery during the upgrade process.

@TexasEmperor

5 жыл бұрын

you have to press the brake every 25 seconds to prevent your vehicle from shutting off...you battery should take it.

@JP-sh3pe

5 жыл бұрын

@@TexasEmperor 25 minutes*... lol

Does the command control knob work within the Carplay application?

@natep3267

5 жыл бұрын

Yes it does. The home button, 'back', music and nav buttons work as well. On the steering wheel the voice command will activate Siri.

@patrickoneill1011

2 жыл бұрын

@@natep3267 Hello. I was wondering if you had to update the firmware? If so, was it from the dealer or online? Thanks!

I’m having so much trouble getting the screen out

Doesn’t Mazda do this for you?

@ReviewingTech101

5 жыл бұрын

They'll do it for you, but not for free.

@lour58

4 жыл бұрын

for about 500 bucks

You will scratch the metal by using screwdriver

@natep3267

5 жыл бұрын

Yes, that is why i suggested wrapping the end of the flat head with duct tape to prevent scratching.

Nate looks mean...Lord. I hope I'm wrong.

You legit forgot the most important part where you tell us which plugs go where….

"your message says I'm on my justinstalled car play" . I guess siri can't hear properly. :-)

will u do mine lmao

All this shit just so you can plug in your phone and play music just connect your Bluetooth and Play it

@FlameBot

5 жыл бұрын

It's for using android auto or Apple carplay. More than just listening to music

Wow I just don't care enough to be ripping my car apart, no thanks

@farawayskies

5 жыл бұрын

Carplay is worth the $200 bucks at the dealership

@lour58

4 жыл бұрын

@@farawayskies plus 290 more for installation