Now i see why carbon parts are so expensive👍🏼

@zrcarbon9937

Ай бұрын

Hey Yes, the labour is the huge part of the price. 🛠️🤘

Love the mix of silent and narrative, keep up the good work mate

@zrcarbon9937

Ай бұрын

Much appreciated! Glad you enjoyed the video 🛠️🤘

Waiting for more videos for a while. I’m glad you are still bringing new content.

@zrcarbon9937

Ай бұрын

Working on so many things in the same time. Soon will be more 🛠️🤘

And nice that you have extended the vacuum bag outside the oven, to maintain the vacuum within.. 🤘

Love the work 👍

@zrcarbon9937

Ай бұрын

Thanks man! 🏍️🛠️👍

Amazing video as usual 👏 👌 ❤️

@zrcarbon9937

Ай бұрын

Thanks again! 🛠️🤘

Amazing freaking work man.

Again a very satisfying video to watch! And I love the easy that the lug-on for the recessed bolt came loose from the mold.. It would not have been the fist time that someone has broken the mold, releasing the plug..

I'm glad to finally see a new video from you!

@zrcarbon9937

Ай бұрын

Took a long time to get back on track 👍 More to come 🛠️🤘

Wellcome back dude!Always good contents, thank you

@zrcarbon9937

Ай бұрын

Thanks so much man! It was a long time to get back on track 🛠️🤘

Very good work! Nice idea on template making too👌🏼

@zrcarbon9937

Ай бұрын

Thanks so much! 🛠️🤘

@hondaequikppd

Ай бұрын

@@zrcarbon9937 do you have instagram?

Top Job, Sir 👌

@zrcarbon9937

Ай бұрын

Thank you! Cheers! 🛠️🤘

J'adore 😊

Looks really cool 🎉

@zrcarbon9937

Ай бұрын

Thanks, I appreciate that 🛠️🤘

Hey man, nice work, great looking parts! Is that a 3D printed plug that you bonded on the part? I was definitely curious how you’d laminate those pieces! I’ve enjoyed following your build so far, looking forward to the rest 👊🏼

Looking to get into making a few carbon parts. In need of a vacuum pump and was curious what pump are you using? I like how quiet it is.

Amazing work as always! Love to see the great craftsmanship. I’m just wondering all this work is for one off part for your project? Or you have some plans on making more

@zrcarbon9937

Ай бұрын

Thank you! I’m glad you’re enjoying the content Yes I would like to sell all the parts around the world! Are you interested in any of them? 🛠️🤘

That's great, hope the next video is coming soon.

@zrcarbon9937

Ай бұрын

Thanks! Very soon! 🛠️🤘

Great Video! One question: Why do you use the filleting wax on the corner of the mould? Doesn't that offset the true edge of the part?

@zrcarbon9937

Ай бұрын

Thanks for the compliment. The reason for that to cover up any tiny gaps, wholes between the barrier and the part. So the gelcoat won’t get in there. That’s the beauty of it. It has to be done in a way that won’t change the shape of the pattern. 🛠️🤘

Hey nice work, what clear coat did you use? I'm looking for a good UV resistant one.

@zrcarbon9937

Ай бұрын

Hey Thanks for the compliment. I used and regularly using Mipa 2K HS Carbonic lacquer 🛠️🤘

Amazing! Do you think the home oven is enough to cook prepreg? Really nice job, I have to do almost the same part, but with hand layup will be a Nightmare 😅😢

@leoa.633

Ай бұрын

regarding the temperature its definitely good enough. Obviously you get more pinholes and porosities than in an autoclave process, because there is less pressure to compress the air bubbles. For better results at home doing a debulk (pulling vacuum) after the first layer improves the pinhole issue. also don't use autoclave prepreg as it has less resin in it and might seem dry if process only with the 1bar you get when pulling vacuum.

@robertopaolucci881

Ай бұрын

@@leoa.633 Thanks for the reply, the thing that concerned me the most is the curing time, for prepreg is usually 6/7 hours with temperature increased during the time. It's very difficult to achieve this on the regular oven IMHO. But the result looks great, so maybe it's just fine. Also like you said maybe debulk and specific prepreg are the key! damm this video made me want to try, but my wife wouldn't be happy I guess ahahaha

@zrcarbon9937

Ай бұрын

Just like as mr. leoa.633 said. 🤘

@Noldimo22

Ай бұрын

@@robertopaolucci881in fact following the perfect temperature ramp up and down is mandatory to achieve best mechanical properties , in this case as the parts are only visual it doesn’t make too much . And mechanically wise difference is in between 10-30% less properties , which is still several times more than the OE plastic 😊. So you’re definitely right in your thinking , in this case that’s fine ✌🏻. And what a beautiful set of parts ! Even if I’m dealing with prepReg everyday i was really curious how the deep and thin screw hole would turn out 🤩. Well done Mr ZRCARBON 🤩

@robertopaolucci881

Ай бұрын

@@Noldimo22 thanks, this is exactly what I wanted to hear hahahaha. this makes prepreg more accessible to us humans. I guess it's time to buy the vacuum pump. and yes you are right, the fixing part seems to come out very well, usually with carbon we make them wider and with more draft. beautiful, I can't wait to try it at this point.

👏👏👏🙏

El material es vinilo de carbono o es fibra de carbono con autoadhesivos con cinta doble contacto?

@user-op1le1zm8i

16 күн бұрын

Где такую можно купить ?

Какая стоимость этих двух деталей +-?

Very nice! How much lighter?

@zrcarbon9937

Ай бұрын

Thanks! I didn’t check the weight. Probably not much difference. 🏍️🛠️👍

Sir what kind of carbon cloth you used..thanks

@zrcarbon9937

16 күн бұрын

Hi I used prepreg carbon fiber. The carbon cloth is pre impregnated with resin. 🛠️🤘

What’s the type of resin that are u using? Epoxy?

@zrcarbon9937

Ай бұрын

Hey I used prepreg carbon fiber. The carbon fiber is prepregnated with resin. Has to be stored in freezer. 🛠️🤘

Air Fryer works too?

@zrcarbon9937

Ай бұрын

Thanks for the idea! 😆 I have to try that! And I tell you what, I started thinking of to try an oil fryer action 🤣 🏍️🛠️😫

Amazing craftsmanship! 🌟🏍

@zrcarbon9937

Ай бұрын

Thanks so much!

bonjour combien pour les deux slp

@zrcarbon9937

Ай бұрын

Hey 180 euros

what carbon do you use?

@zrcarbon9937

Ай бұрын

XC110 210g and xc110 450g prepreg 🛠️🤘

@diashariwibowo317

Ай бұрын

@@zrcarbon9937 im from indonesia. Im intersting for to buy

Здравствуйте! Где такую ткань можно купить ?

@zrcarbon9937

15 күн бұрын

Hey I have links below the video in the description. Also in China there is some good source of prepreg as well.🛠🤟

*Co$t? Or did I miss that?*

@zrcarbon9937

Ай бұрын

No you didn’t miss that. I didn’t do a cost breakdown yet. 🛠️🤘

@m4rvinmartian

Ай бұрын

@@zrcarbon9937 I'm pretty curious, because I am restoring a car where many parts are not available or really expensive, so my choices are limited.