Making Carbon Fiber Seat Cover - Super Light Panigale Part 1
Автокөліктер мен көлік құралдары
Hey everyone
Its been a while since the last video, but finally I cracked out the first part of my super light 1199 panigale build.
Thanks so much for watching!
Пікірлер: 167
Very original design, I love how you used different fibre directions on your layup, it makes it a one of a kind component. With credit to you I'll steal your design for my carbon fairing for my Ducati! 🏍
@zrcarbon9937
Жыл бұрын
Hey Thanks so much for your compliment! I’m glad I gave inspiration for your project. 🏍🛠🤘
Wow! Glad I watched this very interesting setup and design. Be honest thought was just gonna be a simple layup and done glad to be surprised!!!
Lovely tidy job... you made it look so easy. Thank you
@zrcarbon9937
Жыл бұрын
Hey Thanks for your compliment! I appreciate it. More content is coming soon 🛠🤘
Really like the decorative bit with the multiple sections of fabric. Carbon fibre makes it special already, but that makes it truely unique.
@zrcarbon9937
Жыл бұрын
Thanks for the compliment. I tried to build something different 🛠️🤘
Huge amount of work. Perfect result.
@zrcarbon9937
Жыл бұрын
Thanks so much! I’m trying harder and harder every time to get better and better results out of it. I appreciate your feedback 🛠🤘
Rear eat hump. How complex can it be? Beautiful work. Love how you delicately added the strips at the top of the hump, then had a spaz attack randomly laying the rest of the prepreg. Truly, amazing work.
Very good job, well done, thanks for sharing the work.
@zrcarbon9937
Жыл бұрын
Thanks so much 🛠🤘
Serious craftsmanship. Fantastic skills!
@zrcarbon9937
10 ай бұрын
Thanks so much 🛠️🤘
I have never seen a pattern like that, it looks really nice on small parts
@zrcarbon9937
Жыл бұрын
Thanks man! I tried to create something different. 🛠🤘
this turned out really slick! i dig the patchwork pattern.
@zrcarbon9937
Жыл бұрын
Thanks man! I appreciate your compliment! 🛠🤘
Wow, glad I found this channel. Awesome work, learnt alot just from this video. Amazing skills👍
@zrcarbon9937
Жыл бұрын
Thanks so much for your compliment. I’m glad it was useful for you 🛠🤘
looks awesome. great work!!
@zrcarbon9937
Жыл бұрын
Hey man Thanks so much for your compliment! I really appreciate it! 🛠🤘
Una locura ese trabajo !!! Felicitaciones 👏👏👏
@zrcarbon9937
Жыл бұрын
Thanks for the compliment 🛠️🤘
Very impressive work!!!
@zrcarbon9937
Жыл бұрын
Thanks so much! 🛠🤘
Very nice techniques and ideas, salute bro,. you made it! Thanks for sharing. I made one box out of fiberglass to my bicycle also, custom made,. good to learn more.🇦🇪🙏🙏🙏
@zrcarbon9937
Жыл бұрын
Thanks man! Congrats for your custom work, keep going man! 🛠🤘Never stop learning 😉
Very nice work!
@zrcarbon9937
Жыл бұрын
Thanks so much!
Amazing work! Dream superbike Ducati 1199 r tricalore!
Excellent Idea 👍
@zrcarbon9937
Жыл бұрын
Thanks so much! I’ll be trying new things in the future. Keep tuned for that! 🛠🤘
Nice work!
@zrcarbon9937
Жыл бұрын
Thanks so much! More content is coming soon! 🛠🤘
nice work! seems like you would find use for one of those small handheld belt sanders. I have one and it eats carbon fiber like butter and has more control than a dremel.
@zrcarbon9937
8 ай бұрын
Hey Thanks for the compliment! Yes its due to update my tool selection for carbon works. Would make my life easier for sure.🛠🤟
When you vacuum bag it, are you using additional resin that seeps into the bag, or, since it’s pre preg do you just wait for the carbon fiber to cure on its own? How does it stick together so well? Is that what the vacuuming is for?
Wow amazing man 😍
@zrcarbon9937
Жыл бұрын
Thanks so much for your compliment! 🛠🤘
Nicely done..
@zrcarbon9937
Жыл бұрын
Thanks so much! 🛠🤘
Very nice work. I was hoping to see how you fabricated the brackets, but they suddenly appeared on the finished piece. Do you have a video of the process of making and installing the brackets? Thanks for posting this interesting video.
@zrcarbon9937
Жыл бұрын
Hey! Thanks so much for your compliment! I’m working on several other videos at the moment, will be detailed in those videos how exactly I made those brackets. 🛠🤘
@jfeliciano2687
Жыл бұрын
Second!
@ismaelgarcia9486
Жыл бұрын
Did you ever make a video explaining how?? I also would like to know how you did that
@jfeliciano2687
Жыл бұрын
@@zrcarbon9937 okay I've watch this video over 10 times, how long until you put out the video about the brackets? I'll send you money via Venmo/CashApp to speed up the production process because it's killing me not knowing how you actually made the baskets and head everything work out so perfect.
@the1nicko
11 ай бұрын
agreed, I've been looking for the same thing, I have a feeling they were molded separately and just glued on. But also a little disappointed to see them just appear haha makes me think theres a part of the process he didnt want people to see
I watching it couple of Times, still wanna watch it again
@zrcarbon9937
Жыл бұрын
Hey Thanks so much for the compliment. 🛠️🤘 Keep watching my video many times as possible please 😝😁
Very cool stuff. I really like how you did the threaded inserts. How much did the final part weigh? And how much was the original part?
@zrcarbon9937
Жыл бұрын
Thanks so much for your compliment! The original part weight is 345g The CF part is 206g Good amount of weight saving 🤣 🛠🤘
@ereinaldy20
Жыл бұрын
@@zrcarbon9937 now make CF for the bigger part so that the change in weight looks significant
greatjob. would love to see how you made the attachments on the bottom side of the larger piece.
@zrcarbon9937
Жыл бұрын
Thanks very much for your compliment. I’ll be making more videos and sharing tricky cf attachments in the videos. 🛠🤘
@rohanpuri1989
Жыл бұрын
@@zrcarbon9937 great, looking forward to it
that freaking awesome
@zrcarbon9937
Жыл бұрын
Thanks so much man!!! I appreciate your compliment 🛠🤘
Everyone and their mother will ask you where you bought that! Amazing work
@zrcarbon9937
Жыл бұрын
Hey man I appreciate your comment! Thanks so much! 🛠🤘
Do you post cure your molds? Especially with the paste? Also, did you just epoxy on the mounting pieces after curing them separately? Thanks! Great work!
@zrcarbon9937
Жыл бұрын
Hey Thanks for the compliment Yes I have done the post cure process with all the moulds. I used Loctite AA V1315 A&B adhesive. Thanks for watching 🛠🤘
I'm one of your supporters now, you have a good content. Please share more, stay safe and healthy always brother🇦🇪🙏🙏🙏
@zrcarbon9937
Жыл бұрын
Hey man! Thanks so much for your support and compliment! I’m definitely planning to make more and more content. Just curious about, what would you like to see in the video made out of carbon? Thanks so much for watching! 🛠🤘
@migzoili7571
Жыл бұрын
@@zrcarbon9937 i love the process, the style and the way you made the design it's really beautiful🇦🇪👍👍
Nice work bro👍👍👍 Can you tell me how to get a sticky carbon sheet? And its need any resin coat?
Magnifique ❤️
@zrcarbon9937
Жыл бұрын
Thanks so much for your compliment! I really appreciate it 🛠🤘
Subscribed! I want the fairing molds when you're done!
@zrcarbon9937
Жыл бұрын
Hey Thanks! I’m working on those videos at the moment. Will be done soon!!! 🛠🤘
Brilliant video and great detail. Credit to you. Would have liked to see the cure
@zrcarbon9937
Жыл бұрын
Hey Thanks so much for your compliment! It’s still in working progress. I’ll have a video soon and I will include some details about it. Thanks so much for watching 🛠🤘
Awesome
@zrcarbon9937
Жыл бұрын
Thanks
Muy genial 🎉
amazing result what kind of carbon fiber do you use.
@zrcarbon9937
Жыл бұрын
Hey Thanks! I’m using prepreg xc110 and xc130
i know its a little late but just wanted to say nice work! what were the considerations that went into building this as 2 pieces instead of just 1?
@zrcarbon9937
Жыл бұрын
Hey man Thanks so much! The original shape was so much easier to duplicate. 🛠🤘
@jr3628
Жыл бұрын
@@zrcarbon9937 makes sense, keep up the fantastic work and thanks for the reply !
super boulot vous faites des pieces pour les gens
@zrcarbon9937
6 ай бұрын
Hi Yes I make carbon for sale but I won’t make any panigale fairings anymore. Thanks for the compliment 🛠️🤘
@sophiearama187
6 ай бұрын
merci pour le retour faites vous coque retroviseur pour audi a6 c7 2013
Great design!, do you have a list of materials you use ?
@zrcarbon9937
Жыл бұрын
Hey Thanks You can find the list under this video: Prepreg Carbon Fiber Ducati Lower Farings - Super Light Panigale Part 2 kzread.info/dash/bejne/aoGXlppsnsaTqKw.html 🤘🛠️
How did you lay up the mounting tabs? In the video you were cleaning snapped off resin from the mold, and jump straight to the stainless steel latch. Also, wouldn't it have been easier to just make one part?
@zrcarbon9937
11 ай бұрын
Hi Sorry about the missing footage. I lost most of that process on my camera. Check my other video out to see how I did it 🛠️🤘kzread.info/dash/bejne/hIuH2sWKetuyc7A.html
Many thanks for your helpful video! however, at 17:00 approx until 17:46 after release the part from the mould while cuting out contour there is no attachement support and at 17:47 we can see the supports; that would have been interesting to see their fabrication how you laminate. I have to do nearly the same part !!!!
@zrcarbon9937
Жыл бұрын
Hey man Sorry about that. Lost some footage of that part. Basically I made moulds of the supports as you can see in the video. Made the supports out of prepreg than I glue them back in place using the adhesive. I hope that helps for you. Will be more detailed content soon about that process. Thanks so much for watching!
Wowwwwww 👏🏻👏🏻👏🏻👏🏻🤩💯💯💯💯
insane
@zrcarbon9937
Жыл бұрын
Thanks so much 🛠🤘
Great job when are you starting mine lol
@zrcarbon9937
Жыл бұрын
Thanks for your compliment! I’ll be able to build parts for your bike after I done mine. 🛠🤘
is it possible to have links to the products you use? in particular of molding paste thank you so much 🙇🏻♂️🚀
@zrcarbon9937
Жыл бұрын
Hey Yes sure! I will include the links in my next video. Everything I used, supplied from easy composite. Thanks for watching 🛠🤘
What Release Agent & HT mold paste did you use on this? Would be great if you can give me the purchase link as well. Thanks
@zrcarbon9937
Жыл бұрын
Hey I used easy composite products. www.easycomposites.co.uk/easylease-chemical-release-agent www.easycomposites.co.uk/emp160-high-temperature-epoxy-moulding-paste Thanks for watching 🛠🤘
@yonasrahendanu854
Жыл бұрын
@@zrcarbon9937 Thanks a lot bro. 😊
Did you use a oven to bake the carbon fiber? Or just vacuum it?
@zrcarbon9937
Жыл бұрын
Hey Yes I used my own hand built oven. You should check out that video as well. 🏍🛠🤘
Thank you
@zrcarbon9937
Жыл бұрын
Hey No, thank you!!!🛠️🤘
好漂亮,連鎖點也都一起做出來❤️
@zrcarbon9937
Жыл бұрын
Thanks so much for your compliment
Hey sorry to bother you.. how many layers of release agent do you apply for a mould?
@zrcarbon9937
9 ай бұрын
Hey With a brush I apply 3 layers on to the mould. With a cloth I apply 5 layers. I hope this was helpful Have a great day 🛠️🤘
@your_nightmare7355
9 ай бұрын
@@zrcarbon9937 thank you very much!
Donde venden ese tipo de fibra de carbono en pliego o rollo ?
Очень круто. Ты талантливый.
@zrcarbon9937
Жыл бұрын
Thanks so much
How do you know How you have to cut the peaces that they are fitting so Good?
@zrcarbon9937
11 ай бұрын
Hi I used masking tape to take the size off the mold. Than I placed the masking tape on to the carbon fibre and cut the shape out by a scissor. 🛠️🤘
What kind of adhessive are using? the black like glue
@zrcarbon9937
Ай бұрын
MMA adhesive Methyl Methacrylate Adhesives
Hi what kind of carbon fiber did you used? Thanks
@zrcarbon9937
Жыл бұрын
Hey. I used prepreg carbon fiber 210g
@MsQuickshift
Жыл бұрын
@@zrcarbon9937 Thank You 😊👍
Is this real carbon fiber or are those stickers? It looks like some sort of textured wrap?
@zrcarbon9937
Ай бұрын
That’s funny man 🤣 Made of prepreg carbon fiber Just watch the whole video 🛠️🤘
I hope you will make a carbon fiber motorcycle gas tank, because I'm looking for a reference about it
@zrcarbon9937
Жыл бұрын
Hey mate Thanks for watching! I been thinking about it for a long time. I would like to make a full cf petrol tank for my bike. The problem I’m having is, I can’t find the right tank lining yet to protect the epoxy from the petrol. Will be working on it and I’ll try to find the right material. Subscribe for more updates Cheers 🛠🤘
@allanknudsen2616
Жыл бұрын
@@zrcarbon9937 Where are you based? I can probably assist with liner.
@zrcarbon9937
Жыл бұрын
Hey @@allanknudsen2616 Let’s talk! This is my email zrc.works@gmail.com I’m based in London Cheers
How long do you let the gel coat dry between coats
@zrcarbon9937
7 ай бұрын
Hey Roughly around an hour. Wait until the gelcoat tacky to touch. Thanks for watching
@felixkroeber1769
7 ай бұрын
@@zrcarbon9937 thank you, I love your content It inspired me to start making carbon fairings for my R6
Could have made it one piece. Great work!
@zrcarbon9937
Жыл бұрын
Hey Could of make it one piece yes. I was intended to copy exactly the same part. Thanks for the compliment and thanks so much for watching 🛠🤘
What is black liquid?
Nice! Can I order it online?
@zrcarbon9937
Жыл бұрын
Hey, thanks Unfortunately I don’t make them for sell at the moment, but after I finished my bike I’ll be setting up a website for these parts. Thanks so much for watching 🛠🤘
Очень хорошая работа!!! Вы из какой страны?
@zrcarbon9937
Жыл бұрын
Hey mate! I’m from Hungary living in GB
what a point of multi curing process? i mean, can you just make a layup and then vacuum bag it and cure all layers at once?
@zrcarbon9937
Жыл бұрын
Yes you can. I wasn’t multi curing the prepreg. I was debunking the layers. 🛠️🤘
U not use oven for curing?
@zrcarbon9937
Жыл бұрын
Hey man Yes I did. Oven must be used for prepreg cf Thanks for watching 🛠🤘
how often can you reuse the molds?
@zrcarbon9937
3 ай бұрын
If you’re taking care of your mould, a lot of parts can be made out of it 🛠️🤘
can someone explain to me the functionality of the small lid and why it had to be done separately?/кто нибудь мне объяснит функционал маленькой крышки и зачем ее было делать отдельно?
@zrcarbon9937
8 ай бұрын
Hey The seat cover small lid originally how its came out from the factory. I wanted to replicate the same thing. Yes it can be made into a whole piece. 🛠🤟
Ciao dove e reperibile quel tipo di fibra carbonio,,,notato, che non hai usato resina epossidica,,
@zrcarbon9937
Жыл бұрын
Hey The cf called prepreg carbon fiber. The resin is all ready in the cf. Thanks so much for watching!
It doesn't show how u assembled the main peice together since u had two parts for it ...
Please list the products used in your descriptiin. Thanks.
@zrcarbon9937
Жыл бұрын
Hey You can find the list under my other video kzread.info/dash/bejne/aoGXlppsnsaTqKw.html&feature=shares Thanks for watching 🛠️🤘
Zr carbon plus tutorial proses mold gas tank motor caycle and proses produksi nya 🙏
@zrcarbon9937
Жыл бұрын
Hey man Heads up for the updates! Subscribe to ZRCarbon. More videos on it’s way! Cheers 🛠🤘
Ommmgggggg
What is that clay looking stuff that gets hard?
@zrcarbon9937
Жыл бұрын
Hi Called high temperature moulding paste. Sold by easy composite 🛠️🤘
@jeremywilds3384
Жыл бұрын
@@zrcarbon9937 thank you
@jeremywilds3384
Жыл бұрын
Do you have a part number
srsly, you destroy this at first seconds? 😲
@zrcarbon9937
Жыл бұрын
Absolutely. It was an aftermarket Chinese part not original. 🛠🤘
Is that plasticine or something else??
@zrcarbon9937
11 ай бұрын
Wax clay or molding wax.
Carbon fibernya jenis apa tu Broo?
@zrcarbon9937
5 ай бұрын
Hey man I used prepreg carbon fibre xc130 210g and 450g
@harunjuliansyah2414
5 ай бұрын
@@zrcarbon9937 terimakasih bro salam dari indonesia
How to make carbon fiber helmet
@zrcarbon9937
Жыл бұрын
Hey man I only found this link for a carbon helmet kzread.info/dash/bejne/rGqbxKqqaLCtfqg.html Thanks for watching 🛠🤘
@waqarghulam3548
Жыл бұрын
Buy one 😂
stoners mold cleaner & mavcoat release agent.
The question is for how long can this carbon fiber craze be sustained. It is very taxing on environment and takes a lot of time and effort. Just increase engine power and it would be more sustainable. Imaging the amount of energy spent on making all those supplies and then most are thrown in the trash