Bring back your commentary! It's good hearing you explain what you're doing and how you feel it went. Great videos mate. Thanks a lot. Going to look so good when all done.

@Evo_Spec

27 күн бұрын

He does have captions where he explains it too.

@zrcarbon9937

Күн бұрын

Thanks so much! I will bring back the commentary 🏍️🛠️🤘

The fitment looks out of this world. I havet spent 3000$ on carbon still not 100% in fitment. Great job!

@zrcarbon9937

28 күн бұрын

Yeah the fitment is perfect. 👌 All it takes is the attention to details. Thanks for watching 🛠️🤘

Well done, excellent prepreg work!

@zrcarbon9937

28 күн бұрын

Thanks for the compliment! 🛠️🤘

The quality of these videos are top notch man.

@zrcarbon9937

7 күн бұрын

Thanks so much for the compliment! 🏍️🛠️🤘

I think you should make the back cover of the mirrors, as always nice video

@zrcarbon9937

27 күн бұрын

Hey Thanks for the idea! I was planing to build something like a winglet to replace the mirrors. Like the Kawa H2R has.🛠🤟

Looks amazing man, perfect fitment and surface!!

@zrcarbon9937

28 күн бұрын

Thanks so much! 🛠️🤘

So satisfying! Excellent work

@zrcarbon9937

28 күн бұрын

Thanks so much for the compliment! 🛠️🤘

Awesome job!!!!

@zrcarbon9937

28 күн бұрын

Thank you! 🛠️🤘

Looks awesome!

@zrcarbon9937

27 күн бұрын

Thanks! 🛠🤟

Fantastic! Greetings from South Africa!

@zrcarbon9937

28 күн бұрын

Thanks so much! I appreciate that you watching 🛠️🤘

Magnifique 😊

@zrcarbon9937

27 күн бұрын

Thanks so much! I appreciate you're watching 🛠🤟

Sick job!

@zrcarbon9937

27 күн бұрын

Thanks so much!🛠🤟

Wow, that looks so cool man! What are you planning to build for your next video?

@zrcarbon9937

27 күн бұрын

Hey Thanks for the compliment The next will be the side fairings and planning to build a carbon petrol tank. That will be something different for sure.🛠🤟

Hai.. saya ingin melihat cara membuat breket menggunakan 3 d printer di konten selanjutnya❤

Круто !!

In the video, white plastic was attached. Can you tell what material it is?

@zrcarbon9937

27 күн бұрын

Hey That board called Fluted Signboard. You can see me use it in my other videos🛠🤟

@user-gt3xz6wo3o

27 күн бұрын

​@@zrcarbon9937 Friend, other than that, what are the white parts at 19:23 made of? Did you actually 3D print it yourself? What is the material? PLA?

will you do the final cost breakdown? after build completion . or can you make a video about how much it costs to make carbonfiber parts per kg .

@zrcarbon9937

28 күн бұрын

Yes sure I’ll do that Thanks for the idea 🤘🛠️

Amazing work! Did it really pop out of the mold as easy as it looked?

@zrcarbon9937

27 күн бұрын

Thanks you! Yes, I was sooo happy with that. But I knew it won't be a problem because the pattern was popped out really easy.🛠🤟

So, 2x 210g, a layer 450, then another 210? That's ... sturdy ^^ Anyway, great job. I like your methodical approach and attention to detail. Have you tried Easy Composite's resin-richer surface prepregs? Those might help with the pinhole issues you seem to have despite the good prep work.

@zrcarbon9937

27 күн бұрын

Hey Thanks for the compliment!🛠🤟 Yeah I could of use a layer less in the build but I just wanted to make sure it will be sturdy as hell. I'll be trying out the out of autoclave prepreg very soon. I just still have too much of the other stuff. 😅

@protator

27 күн бұрын

@@zrcarbon9937 You should contact their customer service first and give them the rough specs of your equipment, max vacuum and temp capabilities etc ... in theory the ec120 should be the best choice for hobbyists, but I've seen many ppl claim that the 160 autoclave prepreg cures with fewer pinholes even at the lower temps/pressures of their diy curing ovens. So maybe they know what's up with that and what to look out for. My only suspect based on your footage would be a perhaps too liberal application of the heat gun. The areas you use the most heat on to massage the overlaps into place and the spots with the most pinholes appear to be roughly the same. Happy laminating, and stay safe. (I wrecked enough bikes to know how tricky the latter can be^^)

Great job! Did you CAD design those 3d printed brackets using measurements from a digital caliper? thank you

@josephbrawn329

25 күн бұрын

This is a good question! I’m curious if these are made on cad by hand or found online! Amazing part though, top notch

@zrcarbon9937

Күн бұрын

Hey Yes I made the brackets by hand in fusion 360 🛠️🤘

Another great video, is commentary coming back.

@zrcarbon9937

27 күн бұрын

Hey Thanks for the compliment. Yes I would like to have my next video with commentary🛠🤟

are the tabs 3d printed?

@zrcarbon9937

27 күн бұрын

Hey Yes they are.🛠🤟

@asmkaptan3993

23 күн бұрын

Are you use which flament? Pla, petg, abs

@zrcarbon9937

4 күн бұрын

For the prototype pla. For the production part carbon fiber.

Awesome, good work 😎

@zrcarbon9937

27 күн бұрын

Thank you! Cheers!

Très bien fait bravo pour le travail

@zrcarbon9937

22 күн бұрын

Thank you so much 🏍️🛠️🤘